Design and simulation of reflect-array metasurfaces in the visible regime

Graphene-based metasurface for a tunable broadband terahertz cross-polarization converter over a wide angle of incidence

In this paper, using a graphene-based metasurface, we demonstrate a unique design to develop a highly efficient, broadband, mid-infrared cross-polarization converter. The proposed graphene-based metasurface structure comprises periodical ϕ-shaped graphene on the top surface of a noble-metal-backed dielectric silicon dioxide (SiO₂). The reported structure converts the incident linearly polarized wave into cross-polarized components with a peak polarization conversion ratio of more than 0.9 over a large band. Furthermore, the metasurface structure exhibits the full width at half-maximum bandwidth of 41.98% with respect to its center frequency of 5.98 THz. The physical insights behind electromagnetic polarization conversion are supported by field distributions and retrieved electromagnetic parameters. The structure works as a broadband cross-polarization converter up to 40° incident angle for both TE and TM polarizations. In addition, the structure is found to be as thin as ∼λ/6 with respect to lowermost frequency of the polarization conversion. The period of the unit cell is ∼λ/24 to support the fact that the structure can be treated as a metasurface.

Study of Energy Scattering Relation and RCS Reduction Characteristic of Matrix-Type Coding Metasurface

In this paper, we present a design of the linear polarization conversion metasurface (MS) for the broadband radar cross section (RCS) reduction based on split-ring resonator (SRR) structure in microwave region. The corresponding phase gradient can be obtained through the stable phase difference of basic units of polarization conversion MS. The designed polarization conversion MS is applied in coded electromagnetic (EM) matrix by defining two basic units “0” and “1”, respectively. Based on the principle of planar array theory, a new random coding method named by matrix-type coding is proposed. Correlative RCS reduction mechanism is discussed and verified, which can be used to explore the RCS reduction characteristic. The simulated linear polarization conversion rate of the designed structure is up to 90% in the frequency range of 6–15 GHz, and the RCS reduction results verify the theoretical assumptions. Two kinds of matrix-type coding MS samples are prepared and measured. The experimental results indicate that the reflectance of MS is less than –10 dB on average under normal incidence in frequency range of 5.8–15.5 GHz. The average RCS reduction is essentially more than 10 dB in frequency range of 5.5–15 GHz and the corresponding relative bandwidth is 92.7%, which reasonably agrees with simulation. In addition, excellent RCS reduction characteristic of the designed MS can also be achieved over a wide incident angle.

Broadband Polarization Conversion Metasurface Based on Metal Cut-Wire Structure for Radar Cross Section Reduction

A class of linear polarization conversion coding metasurfaces (MSs) based on a metal cut-wire structure is proposed, which can be applied to the reduction properties of radar cross section (RCS). We firstly present a hypothesis based on the principle of planar array theory, and then verify the RCS reduction characteristics using linear polarization conversion coding MSs by simulations and experiments. The simulated results show that in the frequency range of 6⁻14 GHz, the linear polarization conversion ratio reaches a maximum value of 90%, which is in good agreement with the theoretical predictions. For normal incident x- and y-polarized waves, RCS reduction of designed coding MSs 01/01 and 01/10 is essentially more than 10 dB in the above-mentioned frequency range. We prepare and measure the 01/10 coding MS sample, and find that the experimental results in terms of reflectance and RCS reduction are in good agreement with the simulated ones under normal incidence. In addition, under oblique incidence, RCS reduction is suppressed as the angle of incidence increases, but still exhibits RCS reduction effects in a certain frequency range. The designed MS is expected to have valuable potential in applications for stealth field technology.

Resonant cavity enhanced waveguide transmission for broadband and high efficiency quarter-wave plate

Existing transmission type optical quarter-wave plates based on metallic sub-wavelength structures can hardly realize transmission efficiency above 60%. And their working bandwidths are still very narrow. In this paper, we demonstrate a transmission type quarter-wave plate design with efficiency above 92% over a broad wavelength range (from 1260 nm to 1560 nm). The device proposed is based on a one-dimensional metal-insulator-metal waveguide array buried in silica. Phase difference between transmitted TE and TM components can be tuned continuously. At the same time, transmission efficiency can be kept above 90% in the same spectral range for both the TE and TM incidences. The broad bandwidth and remarkable efficiency are explained with the combination of low dispersion of waveguide modes and the resonant cavity enhanced transmission effect. To give a better understanding of the structure, we also propose a modified effective medium model. The optical response of the structure can be well reproduced with the semi-analytic effective medium model.