Automated batch characterization of inkjet-printed elastomer lenses using a LEGO platform

Modeling the surface of fast-cured polymer droplet lenses for precision fabrication

Optical lenses with diameter in the millimeter range have found important commercial use in smartphone cameras. Although these lenses are typically made by molding, recent demonstration of fast-cured polymer droplets by inkjet printing has gained interest for cost-effective smartphone microscopy. In this technique, the surface of a fast-cured polydimethylsiloxane droplet obtains dynamic equilibrium via the interplay of surface tension, gravity, thermalization, and a steep viscosity hike. The nature of surface formation involves multiple physical and chemical domains, which represent significant challenges in modeling with the Young-Laplace theory, assuming constant surface tension and viscosity. To overcome these challenges, we introduce the concept of effective surface tension, which allows fast-cured polymer droplets to be modeled as normal liquid droplets with constant viscosity.

A modular, open-source, slide-scanning microscope for diagnostic applications in resource-constrained settings

In this paper we report the development of a cost-effective, modular, open source, and fully automated slide-scanning microscope, composed entirely of easily available off-the-shelf parts, and capable of bright field and fluorescence modes. The automated X-Y stage is composed of two low-cost micrometer stages coupled to stepper motors operated in open-loop mode. The microscope is composed of a low-cost CMOS sensor and low-cost board lenses placed in a 4f configuration. The system has approximately 1 micron resolution, limited by the f/# of available board lenses. The microscope is compact, measuring just 25×25×30 cm, and has an absolute positioning accuracy of ±1 μm in the X and Y directions. A Z-stage enables autofocusing and imaging over large fields of view even on non-planar samples, and custom software enables automatic determination of sample boundaries and image mosaicking. We demonstrate the utility of our device through imaging of fluorescent- and transmission-dye stained blood and fecal smears containing human and animal parasites, as well as several prepared tissue samples. These results demonstrate image quality comparable to high-end commercial microscopes at a cost of less than US$400 for a bright-field system, with an extra US$100 needed for the fluorescence module.

Open-source do-it-yourself multi-color fluorescence smartphone microscopy

Fluorescence microscopy is an important technique for cellular and microbiological investigations. Translating this technique onto a smartphone can enable particularly powerful applications such as on-site analysis, on-demand monitoring, and point-of-care diagnostics. Current fluorescence smartphone microscope setups require precise illumination and imaging alignment which altogether limit its broad adoption. We report a multi-color fluorescence smartphone microscope with a single contact lens-like add-on lens and slide-launched total-internal-reflection guided illumination for three common tasks in investigative fluorescence microscopy: autofluorescence, fluorescent stains, and immunofluorescence. The open-source, simple and cost-effective design has the potential for do-it-yourself fluorescence smartphone microscopy.