Experimental observations of a laser suppression imaging system using pupil-plane phase elements

Experimental validation and mathematical simulation for laser protection performance of light field imaging

Photoelectric imaging systems typically employ a focal plane detector structure, rendering them vulnerable to laser damage. Laser damage can severely impair or even completely deprive the information acquisition capability of photoelectric imaging systems. A laser damage protection method based on a microlens array light field imaging system is proposed to prevent photoelectric imaging systems from laser damage. The technique utilizes the light field modulation effect of the microlens array to homogenize the spot energy, thereby reducing the maximum single-pixel receiving power at the image sensor. The method's effectiveness has been verified through numerical simulations and experimental validation. First, the laser transmission theoretical model of light field imaging is proposed. Then an experimental setup is established, and measurements are conducted to capture the spot profiles and intensity distributions on the imaging plane across various defocus distances. Finally, the impact of the propagation distance on the maximum single-pixel receiving power and suppression ratio of the light field imaging system is experimentally measured. The simulation and experimental results indicate that, with the proposed method, the energy suppression ratio can easily reach two orders of magnitude, significantly reducing the probability of laser damage in photoelectric imaging systems.

Frequency-domain compression imaging for extending the field of view of infrared thermometers

We propose a computational imaging technique for expanding the field of view of infrared thermometers. The contradiction between the field of view and the focal length has always been a chief problem for researchers, especially in infrared optical systems. Large-area infrared detectors are expensive and technically arduous to be manufactured, which enormously limits the performance of the infrared optical system. On the other hand, the extensive use of infrared thermometers in COVID-19 has created a considerable demand for infrared optical systems. Therefore, improving the performance of infrared optical systems and increasing the utilization of infrared detectors is vital. This work proposes a multi-channel frequency-domain compression imaging method based on point spread function (PSF) engineering. Compared with conventional compressed sensing, the submitted method images once without an intermediate image plane. Furthermore, phase encoding is used without loss of illumination of the image surface. These facts can significantly reduce the volume of the optical system and improve the energy efficiency of the compressed imaging system. Therefore, its application in COVID-19 is of great value. We design a dual-channel frequency-domain compression imaging system to verify the proposed method's feasibility. Then, the wavefront coded PSF and optical transfer function (OTF) are used, and the two-step iterative shrinkage/thresholding (TWIST) algorithm is used to restore the image to get the final result. This compression imaging method provides a new idea for the large field of view monitoring systems, especially in infrared optical systems.

Half-ring point spread functions

We applied point spread function engineering to design an optimized diffuser producing half-ring irradiance patterns satisfying two objectives: reduced peak irradiance in the focal plane, and high fidelity of the reconstructed image. Applications of these optical elements may include sensor protection or reversible diffusers. Experimental and numerical techniques were used to demonstrate three orders of magnitude of suppression of the peak irradiance. Finally, we found a general power-law trend between the Strehl ratio and the light suppression factor.

Laser Safety Calculations for Imaging Sensors

This publication presents an approach to adapt the well-known classical eye-related concept of laser safety calculations on camera sensors as general as possible. The difficulty in this approach is that sensors, in contrast to the human eye, consist of a variety of combinations of optics and detectors. Laser safety calculations related to the human eye target terms like Maximum Permissible Exposure (MPE) and Nominal Ocular Hazard Distance (NOHD). The MPE describes the maximum allowed level of irradiation at the cornea of the eye to keep the eye safe from damage. The hazard distance corresponding to the MPE is called NOHD. Recently, a laser safety framework regarding the case of human eye dazzling was suggested. For laser eye dazzle, the quantities Maximum Dazzle Exposure (MDE) and the corresponding hazard distance Nominal Ocular Dazzle Distance (NODD) were introduced. Here, an approach is presented to extend laser safety calculations to camera sensors in an analogous way. The main objective thereby was to establish closed-form equations that are as simple as possible to allow also non-expert users to perform such calculations. This is the first time that such investigations have been carried out for this purpose.

Simultaneous aberration and aperture control using a single spatial light modulator

A method to simultaneously control aberrations and the aperture of an optical system using a single phase-only spatial light modulator was investigated. The experiment was performed using a liquid-crystal-on-silicon spatial light modulator (LCoS-SLM) within an adaptive optics system used for visual testing, although the method has broader applications in adaptive optics field. The performance of the technique was characterized through the estimation of the system's modulation transfer functions (MTFs) by using a random chart method. MTFs obtained from the phase modulation-based approach were compared with those from using a real aperture (diaphragm). The areas under the MTFs for the two conditions were similar up to 98%, confirming that the low-pass filter effect associated to the size of the entrance pupil was similar for the phase-modulated pupil and the physical pupil. As an example of application, both aberrations and pupil were controlled by a single phase-only modulator to study the through-focus visual performance in real subjects. Limitations and possible enhancements of the presented method were also discussed. The presented technique reduces complexity and cost of adaptive optics systems. It opens the door to new experiments by allowing dynamic modulation of aberrations and apertures of any shape.

Optimized pupil-plane phase masks for high-contrast imaging

A differential evolution algorithm (DEA) is shown to improve the design of phase-only pupil plane masks for imaging in the presence of a high-intensity point source. Strehl and suppression ratio metrics for various phase basis functions were experimentally and numerically calculated. Experiments performed with a spatial light modulator demonstrated 100 times suppression of the peak intensity. The Strehl ratio was found to be higher for the DEA masks compared to the individual phase basis function.