Laser-line-driven phosphor-converted extended white light source with uniform illumination

Design and operation of a hybrid LED/LD-pumped phosphor-converted white-light lamp

Illumination sources based on phosphors, pumped by laser diodes (LDs), have seen rapid developments over the past decade. Here, we present a new, to the best of our knowledge, design that features both spectral richness and the capability for high brightness. Complete design details and operational characterization have been described. This basic design can be extended in various ways to customize such lamps for different operational requirements. A hybrid arrangement of both LEDs and an LD is used to excite a mixture of two phosphors. The LEDs, in addition, provide a blue fill-in to enrich output radiation and to tune the chromaticity point inside the white region. The LD power, on the other hand, can be scaled up to generate very high brightness levels that are not achievable with pumping from LEDs alone. This capability is gained using a special transparent ceramic disk that carries the remote phosphor film. We also show that the radiation from our lamp is free from speckle-producing coherence.

Homogeneous distribution of phosphor particles inside resin using a vertical vibration method for efficient laser-based white light illumination

We report what we believe to be an innovative method for the homogeneous distribution of phosphor particles inside the optical resin-based layer using a vertical vibrational technique for efficient laser-based white light illumination. In this method, single-stage vibration energy was efficiently used against phosphor sedimentation with the help of a mechanical vibrator system. The vertical vibrational energy was transferred to negate the downward gravitational effect acting on each phosphor particle. Therefore, the phosphor particles inside the layer were stable and uniformly distributed from the initial to final drying stages, creating approximate refractive index homogeneity inside the medium. The sedimentation problem was resolved, and all the optical parameters to support this method were properly analyzed and found to be stable and suitable for laser-based illumination applications.

Efficient radiation releasing in device-level glass ceramics driven by a blue laser

Ce³⁺ doped M₃Al₅O₁₂ (MAG, M=Lu, Y) glass ceramics (GCs) have been proved to be shapeable phosphors for white lighting driven by a 453 nm laser. Quantitative characterization reflects that the net emission powers of 4 wt% LuAG-doped GC and 4 wt% YAG-doped GC are 59.99 mW and 66.22 mW at the pump power of 117.63 mW, and the quantum yields reach up to 71.1% and 78.0%, respectively. Miniaturization of devices can be achieved for LuAG/YAG-GCs by optimizing sample size and phosphor concentration with maintaining fluorescence intensity of the samples. Presupposed color coordinate trace reveals that the high-brightness white fluorescence can be realized when the appropriate intensity ratio is determined between residual laser and sample emission. The tunable white fluorescence and the efficient radiation releasing illustrate that LuAG/YAG-GCs are potential candidates for application in solid-state laser illumination.