2.05 kW all-fiber high-beam-quality fiber amplifier with stimulated Brillouin scattering suppression incorporating a narrow-linewidth fiber-Bragg-grating-stabilized laser diode seed source

Towards a tapered Yb-doped fiber-based narrow linewidth single-mode fiber laser with a high signal to Raman ratio

We demonstrate an all-fiber high-power narrow-linewidth fiber laser based on a homemade tapered Yb-doped fiber (T-YDF). The laser performance is investigated and systematically compared with different seed powers and pump manners. The experimental results reveal that the injected seed power requires a trade-off designed to take into account the impact of spectral broadening, nonlinear effects, and transverse mode instability (TMI). Compared with the co-pump manner, the counter-pump manner performs well in inhibiting nonlinearities, spectral broadening, and improving the TMI threshold. Under the counter-pump manner, this narrow-linewidth T-YDF amplifier realized a 2.09 kW output power with a 3 dB spectral linewidth of ∼0.34 nm, a beam quality of M2∼1.28 and a high Raman suppression ratio over 53.5 dB, the highest reported power for such a T-YDF-based narrow-linewidth single-mode laser, to the best of our knowledge. This work provides a promising pathway towards implementing monolithic high-power narrow-linewidth single-mode fiber lasers.

Spectral broadening scheme for suppressing SBS effects based on time-domain optimized chirp-like signals

We propose a novel (to our knowledge) driving scheme to suppress the stimulated Brillouin scattering (SBS) effect in master oscillator power amplification (MOPA) systems based on an external high-order phase modulation. Since seed sources with the linear chirp can uniformly broaden the SBS gain spectrum with a high SBS threshold, a chirp-like signal was designed by applying further editing and processing to the piecewise parabolic signal. Compared with the traditional piecewise parabolic signal, the chirp-like signal has similar linear chirp characteristics and can reduce the driving power and sampling rate requirements, enabling more efficient spectral spreading. The SBS threshold model is constructed theoretically based on the three-wave coupling equation. The spectrum modulated by the chirp-like signal is compared with the flat-top and Gaussian spectra in terms of the SBS threshold and the bandwidth-distribution normalized threshold, and a considerable improvement is demonstrated. Meanwhile, the experimental validation is carried out in a watt-class amplifier based on the MOPA structure. At a 3 dB bandwidth of ∼10 GHz, the SBS threshold of the seed source modulated by the chirp-like signal is improved by 35% compared to the flat-top spectrum and 18% compared to the Gaussian spectrum, respectively, and the normalized threshold is also the highest among them. Our study shows that the SBS suppression effect is not only related to the power distribution of the spectrum but also can be improved by the time domain design, which provides a new idea for analyzing and improving the SBS threshold of narrow-linewidth fiber lasers.

3.96 kW All-Fiberized Linearly Polarized and Narrow Linewidth Fiber Laser with Near-Diffraction-Limited Beam Quality

In this paper, we realize a 3.96 kW all-fiberized and polarization-maintained (PM) amplifier with narrow linewidth and near-diffraction-limited beam quality. Based on a master oscillator power amplifier (MOPA) configuration seeded with phase-modulated single-frequency laser, a 3.96 kW signal laser is achieved with a 3 dB linewidth of 0.62 nm at the pump power of 5.02 kW. At the maximum output power, the polarization extinction ratio (PER) is ~13.9 dB, and the beam quality (M² factor) is M²_x = 1.31, M²_y = 1.41. As far as we know, this is the maximum output power of PM narrow linewidth fiber laser with near-diffraction-limited beam quality and all-fiber format.

Bidirectional tandem-pumped high-brightness 6 kW level narrow-linewidth confined-doped fiber amplifier exploiting the side-coupled technique

In this work, a bidirectional tandem-pumped high-power narrow-linewidth confined-doped ytterbium fiber amplifier is demonstrated based on side-coupled combiners. Benefiting from the large-mode-area design of the confined-doped fiber, the nonlinear effects, including stimulated Raman (SRS) and stimulated Brillouin scattering (SBS), are effectively suppressed. While the transverse mode instability (TMI) effect is also mitigated through the combination of confined-doped fiber design and the bidirectional tandem pumping scheme. As a result, narrow-linewidth fiber laser with 5.96 kW output power is obtained, the slope efficiency and the 3-dB linewidth of which are ∼81.7% and 0.42 nm, respectively. The beam quality is well maintained during the power scaling process, being around M²= 1.6 before the TMI occurs, and is well kept (M²= 2.0 at 5.96 kW) even after the onset of TMI. No SRS or SBS is observed at the maximum output power, and the signal-to-noise ratio reaches as high as ∼61.4 dB. To the best of our knowledge, this is the record power ever reported in narrow-linewidth fiber lasers. This work could provide a good reference for realizing high-power high-brightness narrow-linewidth fiber lasers.

Towards Ultimate High-Power Scaling: Coherent Beam Combining of Fiber Lasers

Fiber laser technology has been demonstrated as a versatile and reliable approach to laser source manufacturing with a wide range of applicability in various fields ranging from science to industry. The power/energy scaling of single-fiber laser systems has faced several fundamental limitations. To overcome them and to boost the power/energy level even further, combining the output powers of multiple lasers has become the primary approach. Among various combining techniques, the coherent beam combining of fiber amplification channels is the most promising approach, instrumenting ultra-high-power/energy lasers with near-diffraction-limited beam quality. This paper provides a comprehensive review of the progress of coherent beam combining for both continuous-wave and ultrafast fiber lasers. The concept of coherent beam combining from basic notions to specific details of methods, requirements, and challenges is discussed, along with reporting some practical architectures for both continuous and ultrafast fiber lasers.

740-watt level optical tap coupler using side-polished large-mode-area double clad fibers for a high power fiber laser

We fabricated a fiber-optic directional coupler based on evanescent field coupling between side-polished large mode area (LMA) double clad fibers (DCFs) for a high power fiber laser. The tapping ratio of the fabricated coupler was measured to be - 32 dB. The fundamental mode coupled in a core of the lower side-polished fiber (SPF) was transferred to the upper SPF without clad-mode coupling. Two SPFs were directly faced to increase an optical handling power up to 740 W. The tapping ratio of the coupler was constantly maintained at the applied laser output. The beam quality of the laser including the fabricated coupler was maintained to be 1.22, without mode distortion by the coupler.

Transverse mode instability in a passive fiber induced by stimulated Raman scattering

Transverse mode instabilities are a major limitation for power scaling of fiber lasers but have so far only been observed in laser-active fibers. In this contribution we present experimental observations of transverse mode instabilities in a passive fiber. In this fiber, stimulated Raman scattering acted as heat source. To demonstrate the effect, a kW-level ytterbium-doped fiber laser was used as pump for a Raman amplifier. Transverse mode instabilities were only observed in the case with high Raman amplification. Frequency resolved stability measurements at various fiber positions as well as spectral and mode resolved measurements pin their origin to the passive fiber. This observation might help to gain further understanding of transverse mode instabilities and shows limitations of high-power Raman amplifiers.