Improvements of phase linearity and phase flicker of phase-only LCoS devices for holographic applications

Polarimetric calibrated robust dual-SLM complex-amplitude computer-generated holography

Liquid crystal on silicon (LCoS) is a widely used spatial light modulator (SLM) in computer-generated holography (CGH). However, the phase-modulating profile of LCoS is often not ideally uniform in application, bringing about undesired intensity fringes. In this study, we overcome this problem by proposing a highly robust dual-SLM complex-amplitude CGH technique, which incorporates a polarimetric mode and a diffractive mode. The polarimetric mode linearizes the general phase modulations of the two SLMs separately, while the diffractive mode uses camera-in-the-loop optimization to achieve improved holographic display. Experimental results show the effectiveness of our proposal in improving reconstructing accuracy by 21.12% in peak signal-to-noise ratio (PSNR) and 50.74% in structure similarity index measure (SSIM), using LCoS SLMs with originally non-uniform phase-modulating profiles.

Phase flicker-induced sharpness deterioration on 2D holographic displays with digitally driven phase-only LCoS devices

Phase flicker in liquid crystal on silicon (LCoS) devices can decrease the effective phase modulation resolution by introducing overlapped phase oscillations between adjacent modulated gray levels, thus degrading the performance of LCoS devices in various applications. However, the effect of phase flicker on a holographic display is often overlooked. From an application angle, this paper investigates the quality of the holographic reconstructed image, especially sharpness, under the static and dynamic effects of different flicker magnitudes. Both the simulation and experimental results reveal that the increment in the magnitude of phase flicker causes an equal sharpness deterioration with the reduction of the numbers of hologram phase modulation levels.

Electrically tuned active metasurface towards metasurface-integrated liquid crystal on silicon (meta-LCoS) devices

Active metasurfaces add a new dimension to static metasurfaces by introducing tunability, and this has received enormous attention from industry. Although various mechanisms have been proposed over the past few years in literature, solutions with good practicality are limited. Liquid crystal (LC)-based active metasurface is one of the most promising approaches due to the well-established LC industry. In this paper, an electrically tunable active metasurface was proposed and experimentally demonstrated using photoaligned nematic LC. The good quality of the LC photoalignment on the metasurface was demonstrated. Tunable transmission was obtained for telecommunication C band and the modulation depth in transmission amplitude of 94% was realized for 1530 nm. Sub-millisecond response time was achieved at operating a temperature of 60°C. The progress made here presents the potential of LC-based active metasurfaces for fast-switching photonic devices at optical communication wavelengths. More importantly, this work lays the foundations for the next-generation liquid crystal on silicon (LCoS) devices that are integrated with metasurfaces (meta-LCoS).

Effects of phase flicker in digitally driven phase-only LCOS devices on holographic reconstructed images

Phase flicker can degrade the performance of holographic applications at the device and application levels. On the device side, the meaningful phase modulation resolution is proved to be limited by the overlapping between adjacent phase levels caused by flicker. Here, the tolerance of the overlapping for different modulation levels is provided. The frame rate of the device is also constrained by the phase flicker. The balance between low flicker and fast LC response for fast frame rate is quantitatively analyzed. On the application side, the effects of real phase flicker on the performance of blazed gratings and image holograms are investigated using the temporal phase flicker profiles measured from a phase-only liquid crystal on silicon (LCOS) device; they are shown to be comparable with that introduced by quantization level and amplitude noise, respectively.

Efficient dynamic control method of light polarization using single phase-only liquid crystal on silicon spatial light modulators for optical data storage

The technology of five-dimensional (5D) optical data storage in transparent materials paves a promising way to unlimited lifetime data storage for future cloud use. Phase-only liquid-crystal-on-silicon spatial light modulators (LCOS SLMs) have already exhibited its potential for this application in tailoring ultrafast laser writing beams for 5D optical data storage. A phase-only LCOS SLM can generate arbitrary data patterns by using diffractive holographic imaging for data writing light beam generation. However, the polarization control of the output holographic image is still achieved by using an external polarization modulator, which leads to complications, bulkiness, and large delays in current methods. In this paper, we presented an efficient phase and polarization modulation method through a compact system based on a single phase-only LCOS SLM to simultaneously control both the holographic image and its polarization state. The proposed method utilizes two-polarization-component coding in conjunction with a polarization component rotation technique in a compact system. Using this polarization rotation technique, two light components can be independently coded by separately using two holograms on two halves of the LCOS SLM. We experimentally construct a proof-of-concept prototype of the compact system, and the effectiveness of the system has been experimentally verified.

Sub-millisecond switching of multi-level liquid crystal on silicon spatial light modulators for increased information bandwidth

Sub-millisecond response time with a refresh rate higher than 2000 frames per second (fps) and no degradation of the contrast ratio or diffraction efficiency is demonstrated in working liquid crystal on silicon (LCOS) spatial light modulators (SLMs) with 8-bit grey levels of amplitude and phase modulations. This makes possible to achieve an information bandwidth of about 190 Gb s^-1 with a 4k LCOS operating at 10-bit phase modulation levels. The normalised contrast stays at almost the unit level for a frame rate up to 1700 fps and at higher than 0.9 for 2500 fps. The diffraction efficiency stays above -1.0 dB for a frame rate up to 2400 fps. Such a fast response allows us to eliminate image blurring in replaying a fast movie.

Phase flicker minimisation for crosstalk suppression in optical switches based on digital liquid crystal on silicon devices

The phase flicker in digital liquid crystal on silicon (LCOS) device introduces temporal phase noise to the phase pattern displayed on the device. Such temporal phase noise could elevate the power of unwanted diffraction orders and ultimately cause crosstalk in optical switches based on the LCOS technology. Building on our previous work, this paper demonstrated an automated phase flicker optimisation process by using the genetic algorithm. The method developed in this work further shortened the optimisation process by 10x. It was also demonstrated that the optimised digital driving waveform set was able to reduce the crosstalk level in the optical switches by at least 3 dB.