Doppler imaging with dual-detection full-range frequency domain optical coherence tomography

Optical Coherence Tomography as an Alternative Tool for Evaluating the Effects of Glyphosate on Hybrid Catfish (Clarias gariepinus ×fig Clarias macrocephalus)

•

The use of OCT to evaluate the effects of glyphosate on hybrid catfish was studied.

•

OCT can capture tissue damages in hybrid catfish caused by glyphosate.

•

OCT entails a short preparation time, simple analysis, and chemical free.

•

OCT has potential for real-time or field-based study in aquaculture.

Glyphosate contamination in fresh water is a major problem in agricultural countries. It affects many vital organs in freshwater organisms that are important in the food chain. Hence, the effects of glyphosate on living organism organs are of particular interest. However, several existing techniques for evaluating the effect of glyphosate on aquatic organisms require stained tissue. To study organ tissue with minimal processing, alternative technique is demanded. Here, we investigated the used of optical coherence tomography (OCT) as an alternative tool for ex vivo evaluation of the effect of glyphosate on organ tissues of aquatic organisms, i.e., hybrid catfish (Clarias gariepinus × Clarias macrocephalus). The targeted samples were organ tissues from the brain, gill, and liver of hybrid catfish after glyphosate exposion at concentration of 10 mg L⁻¹ for 24 h. The alteration was then verified by histology, and immunohistochemistry. The study found that all three techniques provide correlated results. We observed that OCT clearly showed damage to the brain and gill tissues of glyphosate-exposed hybrid catfish. However, the alteration in liver tissue was observable but not clear for this low concentration of exposure. The results from histology and immunohistochemistry confirmed the effect of glyphosate on brain, gill, and liver tissues of hybrid catfish. The results suggest that all three techniques could be used to examine the effects of glyphosate exposure in hybrid catfish. However, the choice of a suitable technique depends upon the purpose of the study.

Wave-based optical coherence elastography: The 10-year perspective

After 10 years of progress and innovation, optical coherence elastography (OCE) based on the propagation of mechanical waves has become one of the major and the most studied OCE branches, producing a fundamental impact in the quantitative and nondestructive biomechanical characterization of tissues. Preceding previous progress made in ultrasound and magnetic resonance elastography; wave-based OCE has pushed to the limit the advance of three major pillars: (1) implementation of novel wave excitation methods in tissues, (2) understanding new types of mechanical waves in complex boundary conditions by proposing advance analytical and numerical models, and (3) the development of novel estimators capable of retrieving quantitative 2D/3D biomechanical information of tissues. This remarkable progress promoted a major advance in answering basic science questions and the improvement of medical disease diagnosis and treatment monitoring in several types of tissues leading, ultimately, to the first attempts of clinical trials and translational research aiming to have wave-based OCE working in clinical environments. This paper summarizes the fundamental up-to-date principles and categories of wave-based OCE, revises the timeline and the state-of-the-art techniques and applications lying in those categories, and concludes with a discussion on the current challenges and future directions, including clinical translation research.

Shear wave propagation in viscoelastic media: validation of an approximate forward model

Many approaches to elastography incorporate shear waves; in some systems these are produced by acoustic radiation force (ARF) push pulses. Understanding the shape and decay of propagating shear waves in lossy tissues is key to obtaining accurate estimates of tissue properties, and so analytical models have been proposed. In this paper, we reconsider a previous analytical model with the goal of obtaining a computationally straightforward and efficient equation for the propagation of shear waves from a focal push pulse. Next, this model is compared with an experimental optical coherence tomography (OCT) system and with finite element models, in two viscoelastic materials that mimic tissue. We find that the three different cases-analytical model, finite element model, and experimental results-demonstrate reasonable agreement within the subtle differences present in their respective conditions. These results support the use of an efficient form of the Hankel transform for both lossless (elastic) and lossy (viscoelastic) media, and for both short (impulsive) and longer (extended) push pulses that can model a range of experimental conditions.

Comparative study of shear wave-based elastography techniques in optical coherence tomography

We compare five optical coherence elastography techniques able to estimate the shear speed of waves generated by one and two sources of excitation. The first two techniques make use of one piezoelectric actuator in order to produce a continuous shear wave propagation or a tone-burst propagation (TBP) of 400 Hz over a gelatin tissue-mimicking phantom. The remaining techniques utilize a second actuator located on the opposite side of the region of interest in order to create three types of interference patterns: crawling waves, swept crawling waves, and standing waves, depending on the selection of the frequency difference between the two actuators. We evaluated accuracy, contrast to noise ratio, resolution, and acquisition time for each technique during experiments. Numerical simulations were also performed in order to support the experimental findings. Results suggest that in the presence of strong internal reflections, single source methods are more accurate and less variable when compared to the two-actuator methods. In particular, TBP reports the best performance with an accuracy error < 4.1 % . Finally, the TBP was tested in a fresh chicken tibialis anterior muscle with a localized thermally ablated lesion in order to evaluate its performance in biological tissue.

Crawling wave optical coherence elastography

Elastography is a technique that measures and maps the local elastic property of biological tissues. Aiming for detection of micron-scale inclusions, various optical elastography, especially optical coherence elastography (OCE), techniques have been investigated over the past decade. The challenges of current optical elastography methods include the decrease in elastographic resolution as compared with its parent imaging resolution, the detection sensitivity and accuracy, and the cost of the overall system. Here we report for the first time, we believe, on an elastography technique-crawling wave optical coherence elastography (CRW-OCE)-which significantly lowers the requirements on the imaging speed and opens the path to high-resolution and high-sensitivity OCE at relatively low cost. Methods of crawling wave excitation, data acquisition, and crawling wave tracking are presented.

Full-range Fourier domain Doppler optical coherence tomography based on sinusoidal phase modulation

A novel full-range Fourier domain Doppler optical coherence tomography (full-range FD-DOCT) using sinusoidal phase modulation for B-M scan is proposed. In this sinusoidal B-M scan, zero optical path difference (OPD) position does not move corresponding to lateral scanning points in contrast to linear B-M scan. Since high phase sensitivity arises around the zero OPD position, the proposed full-range FD-DOCT can achieve easily high velocity sensitivity without mirror image around the zero OPD position. Velocity sensitivity dependent on the OPD and the interval of scanning points is examined, and flow velocity detection capability is verified through Doppler imaging of a flow phantom and an in vivo biological sample.

Two-reference swept-source optical coherence tomography of high operation flexibility

The significantly less stringent operation of a two-reference swept-source optical coherence tomography (OCT) system for suppressing the mirror image is demonstrated based on the spatially localized image processing method. With this method, the phase difference between the two reference signals is not limited to 90 degrees. Based on the current experimental operation, the mirror image can be effectively suppressed as long as the phase difference is larger than 20 degrees. In other words, the adjustment of the beam splitter orientation for controlling the phase difference becomes much more flexible. Also, based on a phantom experiment, the combination the spatially localized mirror image suppression method with the two-reference OCT operation leads to the implementation of full-range optical Doppler tomography.

Gabor fusion technique in a Talbot bands optical coherence tomography system

In this paper we show how to advantageously combine two effects to enhance the sensitivity with depth in Fourier domain (FD) optical coherence tomography (OCT): Talbot bands (TB) and Gabor-based fusion (GF) technique. TB operation is achieved by routing the two beams, from the object arm and from the reference arm in the OCT interferometer, along parallel separate paths towards the spectrometer. By adjusting the lateral gap between the two beams in their way towards the spectrometer, the position for the maximum of contrast variation of spectral modulation versus the optical path difference in the interferometer is adjusted. For five values of the focus position, the gap between the two beams is readjusted to reach maximum sensitivity. Then, similar to the procedure employed in the GF technique, a compound image is formed by stitching together the parts of the five images that exhibited maximum brightness. The smaller the diameters of the two beams, the narrower the visibility profile versus depth in Talbot bands, which brings advantages in terms of mirror terms attenuation. However, this leads to a larger spot on the linear camera, which introduces losses, therefore the combined procedure, TB/GF is investigated for four different values of the beam diameters of the two beams. Future cameras with larger pixel size may take full advantage of the TB/GF procedure proposed here.