Holographic UV laser microsurgery

Local aberration control to improve efficiency in multiphoton holographic projections

Optical aberrations affect the quality of light propagating through a turbid medium, where refractive index is spatially inhomogeneous. In multiphoton optical applications, such as two-photon excitation fluorescence imaging and optogenetics, aberrations non-linearly impair the efficiency of excitation. We demonstrate a sensorless adaptive optics technique to compensate aberrations in holograms projected into turbid media. We use a spatial light modulator to project custom three dimensional holographic patterns and to correct for local (anisoplanatic) distortions. The method is tested on both synthetic and biological samples to counteract aberrations arising respectively from misalignment of the optical system and from samples inhomogeneities. In both cases the anisoplanatic correction improves the intensity of the stimulation pattern at least two-fold.

In situ laser manipulation of root tissues in transparent soil

AIMS

Laser micromanipulation such as dissection or optical trapping enables remote physical modification of the activity of tissues, cells and organelles. To date, applications of laser manipulation to plant roots grown in soil have been limited. Here, we show laser manipulation can be applied in situ when plant roots are grown in transparent soil.

METHODS

We have developed a Q-switched laser manipulation and imaging instrument to perform controlled dissection of roots and to study light-induced root growth responses. We performed a detailed characterisation of the properties of the cutting beams through the soil, studying dissection and optical ablation. Furthermore, we also studied the use of low light doses to control the root elongation rate of lettuce seedlings (Lactuca sativa) in air, agar, gel and transparent soil.

RESULTS

We show that whilst soil inhomogeneities affect the thickness and circularity of the beam, those distortions are not inherently limiting. The ability to induce changes in root elongation or complete dissection of microscopic regions of the root is robust to substrate heterogeneity and microscopy set up and is maintained following the limited distortions induced by the transparent soil environment.

CONCLUSIONS

Our findings show that controlled in situ laser dissection of root tissues is possible with a simple and low-cost optical set-up. We also show that, in the absence of dissection, a reduced laser light power density can provide reversible control of root growth, achieving a precise "point and shoot" method for root manipulation.

Laser-Induced Focused Ultrasound for Cavitation Treatment: Toward High-Precision Invisible Sonic Scalpel

Beyond the implementation of the photoacoustic effect to photoacoustic imaging and laser ultrasonics, this study demonstrates a novel application of the photoacoustic effect for high-precision cavitation treatment of tissue using laser-induced focused ultrasound. The focused ultrasound is generated by pulsed optical excitation of an efficient photoacoustic film coated on a concave surface, and its amplitude is high enough to produce controllable microcavitation within the focal region (lateral focus <100 µm). Such microcavitation is used to cut or ablate soft tissue in a highly precise manner. This work demonstrates precise cutting of tissue-mimicking gels as well as accurate ablation of gels and animal eye tissues.

Fiber-laser-based, high-repetition-rate, picosecond ultraviolet source tunable across 329-348 nm

We report a compact, fiber-laser-based, high-repetition-rate picosecond source for the ultraviolet (UV), providing multi-tens of milliwatt of average power across 329-348 nm. The source is based on internal sum-frequency-generation (SFG) in a singly resonant optical parametric oscillator (OPO), synchronously pumped at 532 nm by the second harmonic of a picosecond Yb-fiber laser at 80 MHz repetition rate. Using a 30-mm-long single-grating MgO:sPPLT crystal for the OPO and a 5-mm-long BiB₃O₆ crystal for intracavity SFG, we generate up to 115 mW of average UV power at 339.9 nm, with >50  mW over 73% of the tuning range, for 1.6 W of input pump power. The UV output exhibits a passive rms power stability of ∼2.9% rms over 1 min and 6.5% rms over 2 h in high beam quality. Angular acceptance bandwidth and cavity detuning effects have also been studied.

Scalable digital spatial light modulator-micromesh heterostructures for real time wave optical applications

For large-scale real time wave optical applications, we propose and demonstrate scalable simple digital spatial light modulator (SLM)-micromesh (μM) heterostructures, which fully harness ubiquitous well developed consumer information displays for real time large-scale SLMs and advanced patterning technologies for promoting the wave optical properties of SLMs of any size. Weakly diffractive projection mode large-scale SLMs with poor demultiplexity are transformed to highly diffractive mode heterostructures with fine patterned micromeshes as efficient demultiplexers or wave optical promoters. As a result, diffraction efficiency, diffraction angle, demultiplexity, multiplexity, reconstructed image quality and numbers of visibly reconstructed images largely increase even though the pixel pitches of the employed SLMs are many orders of magnitude larger than the wavelength of the illuminating light. The approach shown in this study can be applicable even for any sized weakly diffractive SLMs, and can simultaneously increase the effective spatial bandwidth and the physical dimension required for their wave optical applications. This can't be achieved by presently available SLMs alone.

High-power, continuous-wave, solid-state, single-frequency, tunable source for the ultraviolet

We report the development of a compact, high-power, continuous-wave, single-frequency, ultraviolet (UV) source with extended wavelength tunability. The device is based on single-pass, intracavity, second-harmonic-generation (SHG) of the signal radiation of a singly resonant optical parametric oscillator (SRO) working in the visible and near-IR wavelength range. The SRO is pumped in the green with a 25-mm-long, multigrating, MgO doped periodically poled stoichiometric lithium tantalate (MgO:sPPLT) as nonlinear crystal. Using three grating periods, 8.5, 9.0, and 9.5 μm of the MgO:sPPLT crystal and a single set of cavity mirrors, the SRO can be tuned continuously across 710.7-836.3 nm in the signal and corresponding idler across 2115.8-1462.1 nm with maximum idler power of 1.9 W and maximum out-coupled signal power of 254 mW. By frequency-doubling the intracavity signal with a 5-mm-long bismuth borate (BIBO) crystal, we can further tune the SRO continuously over 62.8 nm across 355.4-418.2 nm in the UV with maximum single-frequency UV power, as much as 770 mW at 398.28 nm in a Gaussian beam profile. The UV radiation has an instantaneous line-width of ∼14.5  MHz and peak-peak frequency stability of 151 MHz over 100 s. More than 95% of the tuning range provides UV power >260  mW. Access to lower UV wavelengths can in principle be realized by operating the SRO in the visible using shorter grating periods.

Yb-fiber-laser-pumped, high-repetition-rate picosecond optical parametric oscillator tunable in the ultraviolet

We report a compact tunable 240-MHz picosecond source for the ultraviolet based on intra-cavity frequency doubling of a signal-resonant MgO:sPPLT optical parametric oscillator (OPO), synchronously pumped at 532 nm in the green by the second harmonic of a mode-locked Yb-fiber laser at 80-MHz repetition rate. By deploying a 30-mm-long multi-grating MgO:sPPLT crystal for the OPO and a 5-mm-long BiB(3)O(6) crystal for internal doubling, we have generated tunable UV radiation across 317-340.5 nm, with up to 30 mW at 334.5 nm. The OPO also provides tunable visible signal in the red, across 634-681 nm, and mid-infrared idler radiation over 2429-3298 nm, with as maximum signal power of 800 mW at 642 nm. The signal pulses have a temporal duration of 12 ps at 665 nm and exhibit high spatial beam quality with Gaussian profile. The signal power is recorded to be naturally stable with a fluctuation of 1.4% rms over 14 hours, while UV power degradation has been observed and studied.

Apical oscillations in amnioserosa cells: basolateral coupling and mechanical autonomy

Holographic laser microsurgery is used to isolate single amnioserosa cells in vivo during early dorsal closure. During this stage of Drosophila embryogenesis, amnioserosa cells undergo oscillations in apical surface area. The postisolation behavior of individual cells depends on their preisolation phase in these contraction/expansion cycles: cells that were contracting tend to collapse quickly after isolation; cells that were expanding do not immediately collapse, but instead pause or even continue to expand for ∼40 s. In either case, the postisolation apical collapse can be prevented by prior anesthetization of the embryos with CO2. These results suggest that although the amnioserosa is under tension, its cells are subjected to only small elastic strains. Furthermore, their postisolation apical collapse is not a passive elastic relaxation, and both the contraction and expansion phases of their oscillations are driven by intracellular forces. All of the above require significant changes to existing computational models.