Vector magnetocardiography measurement with a compact elliptically polarized laser-pumped magnetometer

Vector magnetocardiography using compact optically-pumped magnetometers

Optically pumped magnetometers can provide functionality for bio-magnetic field detection and mapping. This has attracted widespread attention from researchers in the biomedical science field. Magnetocardiography has been proven to be an effective method for examining heart disease. Notably, vector magnetocardiography obtains more spatial information than the conventional method by only taking a component that is perpendicular to the chest surface. In this work, a spin-exchange-relaxation-free (SERF) magnetometer with a compact size of 14 mm × 25 mm × 90 mm was developed. The device has a high sensitivity of 25 fT/ Hz . Meanwhile, in the multichannel working mode, synchronous sensor manipulation and data acquisition can be achieved through our control software without additional data acquisition boards. Since a typical SERF magnetometer only responds to dual-axis magnetic fields, two sensors are orthogonally arranged to form a vector detection channel. Our system consists of seven channels and allows 7 × 9 vector MCG mapping by scanning. High-quality heart vector signals are measured, and P peak, QRS peak, and T peak can be distinguished clearly. To better demonstrate the vectorial information, a vector scatter plot form is also provided. Through a basic bio-electric current model, it demonstrates that triaxial MCG measurements capture a richer spatial current information than traditional uniaxial MCG, offering substantial diagnostic potential for heart diseases and shedding more light on the inversion of cardiac issues.

Machine learning assisted vector atomic magnetometry

Multiparameter sensing such as vector magnetometry often involves complex setups due to various external fields needed in explicitly connecting one measured signal to one parameter. Here, we propose a paradigm of indirect encoding for vector atomic magnetometry based on machine learning. We encode the three-dimensional magnetic-field information in the set of four simultaneously acquired signals associated with the optical rotation of a laser beam traversing the atomic sample. The map between the recorded signals and the vectorial field information is established through a pre-trained deep neural network. We demonstrate experimentally a single-shot all optical vector atomic magnetometer, with a simple scalar-magnetometer design employing only one elliptically-polarized laser beam and no additional coils. Magnetic field amplitude sensitivities of about 100 [Formula: see text] and angular sensitivities of about [Formula: see text] (for a magnetic field of around 140 nT) are derived from the neural network. Our approach can reduce the complexity of the architecture of vector magnetometers, and may shed light on the general design of multiparameter sensing.

Light-noise suppression method for the single-beam optically-pumped magnetometer arrays

We propose a miniaturized single-beam optically pumped magnetometer (OPM) with a laser power differential structure, along with a dynamically-adjusted detection circuit. This design enables the suppression of optical fluctuation noise and the enhancement of magnetometer sensitivity. For a single-beam OPM, pump light fluctuation noise is a significant contributor to output noise. To address this, we propose an OPM with a laser differential structure that separates the pump light as a part of the reference signal before it enters the cell. The reference current and OPM output current are then subtracted to suppress the noise introduced by pump light fluctuations. To achieve optimal optical noise suppression, we implement balanced homodyne detection (BHD) with real-time current adjustment, which dynamically adjusts the reference ratio between the two currents according to their amplitude. Ultimately, we can reduce the noise introduced by pump light fluctuations by 47% of the original. The OPM with laser power differential achieves a sensitivity of 17.5 fT/Hz^1/2, with the optical fluctuation equivalent noise at 13 fT/Hz^1/2.

Precision Magnetic Field Sensing with Dual Multi-Wave Atom Interferometer

Precision magnetic field measurement is widely used for practical applications, fundamental research, and medical purposes, etc. We propose a novel quantum magnetometer based on atoms' multi-wave (3-wave and 5-wave) Ramsey interference. Our design features high phase sensitivity and can be applied to in situ measurements of the magnetic field inside vacuum chambers. The final state detection is designed to be achieved by Raman's two-photon transition. The analytical solution for applicable interference fringe is presented. Fringe contrast decay due to atom temperature and magnetic field gradient is simulated to estimate reasonable experimental conditions. Sensitivity functions for phase noise and magnetic field noise in a multi-wave system are derived to estimate the noise level required to reach the expected resolution. The validity of the model, dual-channel features on bias estimation, and the quasi-non-destructive detection feature are discussed.

Three-axis closed-loop optically pumped magnetometer operated in the SERF regime

We propose a three-axis closed-loop optically pumped magnetometer with high sensitivity. The closed-loop magnetometer has a three-axis sensitivity of approximately 30 fT/Hz^1/2 using two orthogonal laser beams for pumping and probing the alkali metal atoms. In the closed-loop mode, the dynamic range is improved from ±5 nT to ±150 nT. The bandwidth is increased from about 100 Hz to over 2 kHz with 10 kHz modulation fields in x- and y-axes and another 6 kHz modulation field along the z-axis. Compared with single-axis or dual-axis magnetometers, the proposed magnetometer not only provides the direction and magnitude of the magnetic field but also has high robustness in a challenging environment. The magnetometer has applications in biomagnetic measurements, magnetic resonance imaging, and fundamental physics.

Vector magnetometer based on the effect of coherent population trapping

The method is presented for converting a coherent population trapping (CPT) atomic clock into a CPT vector (compass-) magnetometer without mechanically moving parts through a relatively simple add-on. The system of 3D Helmholtz coils was used for compensation of the external magnetic field, allowing measurement of both strength and direction of a magnetic field at the sensitivity level of sub-nT/Hz^1/2 within a 10-Hz bandwidth. Angular resolution of the developed vector magnetometer amounts to about 10^-2 degrees.

Tunnel Magnetoresistance Sensor with AC Modulation and Impedance Compensation for Ultra-Weak Magnetic Field Measurement

Tunnel magnetoresistance (TMR) is a kind of magnetic sensor with the advantages of low cost and high sensitivity. For ultra-weak and low-frequency magnetic field measurement, the TMR sensor is affected by the 1/f noise. This paper proposes an AC modulation method with impedance compensation to improve the performance. The DC and AC characteristics of the sensors were measured and are presented here. It was found that both the equivalent resistance and capacitor of the sensors are affected by the external magnetic field. The TMR sensors are connected as a push–pull bridge circuit to measure the magnetic field. To reduce the common-mode noise, two similar bridge circuits form a magnetic gradiometer. Experimental results show that the sensor’s sensitivity in the low-frequency range is obviously improved by the modulation and impedance compensation. The signal-to-noise ratio of the sensor at 1 Hz was increased about 25.3 dB by the AC modulation, impedance compensation, and gradiometer measurement setup. In addition, the sensitivity of the sensor was improved from 165.2 to 222.1 mV/V/mT. Ultra-weak magnetic signals, namely magnetocardiography signals of two human bodies, were measured by the sensor in an unshielded environment. It was seen that the R peak of MCG can be clearly visualized from the recorded signal.

High-sensitivity operation of a single-beam atomic magnetometer for three-axis magnetic field measurement

We demonstrate a single-beam atomic magnetometer (AM) capable of measuring a three-axis magnetic field with high-sensitivity, achieved by applying a small DC offset field and a high frequency modulation field. To satisfy the miniaturization demand of AMs, an elliptically polarized light detuned by 50 GHz from the resonance transition center is employed. The circularly polarized component is used to polarize the alkali-metal atoms, while the linearly polarized light is used to detect the dynamics of the polarized spin under a magnetic field. Based on theoretical analysis, parameters that significantly affect the performance are optimized, and a sensitivity of 20 fT/Hz^1/2 in x-axis, 25 fT/Hz^1/2 in y-axis, 30 fT/Hz^1/2 in z-axis is achieved with a miniature 4 × 4 × 4 mm ⁸⁷Rb vapor cell. Moreover, we also verify that the operation principle of AMs can be used to null background magnetic fields in-situ with isotropic compensation resolution of 6.7 pT, which provides an effectively precise method for zeroing ambient magnetic field. The high-sensitivity operating of an elliptically-polarized-laser-based magnetometer provides prospective futures for constructing a compact, low-cost AM, which is particularly applicable for non-invasive bio-magnetic imaging such as array-based magnetoencephalography (MEG) and magnetocardiography (MCG).