Optical properties of PlatSil SiliGlass tissue-mimicking phantoms

Time-domain diffuse optical imaging technique for monitoring rheumatoid arthritis disease activity: experimental validation in tissue-mimicking finger phantoms

Objective.Effective treatment within 3-5 months of disease onset significantly improves rheumatoid arthritis (RA) prognosis. Nevertheless, 30% of RA patients fail their first treatment, and it takes 3-6 months to identify failure with current monitoring techniques. Time-domain diffuse optical imaging (TD-DOI) may be more sensitive to RA disease activity and could be used to detect treatment failure. In this report, we present the development of a TD-DOI hand imaging system and validate its ability to measure simulated changes in RA disease activity using tissue-mimicking finger phantoms.Approach.A TD-DOI system was built, based on a single-pixel camera architecture, and used to image solid phantoms which mimicked a proximal interphalangeal finger joint. For reference,in silicoimages of virtual models of the solid phantoms were also generated using Monte Carlo simulations. Spatiotemporal Fourier components were extracted from both simulated and experimental images, and their ability to distinguish between phantoms representing different RA disease activity was quantified.Main results.Many spatiotemporal Fourier components extracted from TD-DOI images could clearly distinguish between phantoms representing different states of RA disease activity.Significance.A TD-DOI system was built and validated using finger-mimicking solid phantoms. The findings suggest that the system could be used to monitor RA disease activity. This single-pixel TD-DOI system could be used to acquire longitudinal measures of RA disease activity to detect early treatment failure.

Effect of curvature correction on parameters extracted from hyperspectral images

SIGNIFICANCE

Hyperspectral imaging (HSI) has emerged as a promising optical technique. Besides optical properties of a sample, other sample physical properties also affect the recorded images. They are significantly affected by the sample curvature and sample surface to camera distance. A correction method to reduce the artifacts is necessary to reliably extract sample properties.

AIM

Our aim is to correct hyperspectral images using the three-dimensional (3D) surface data and assess how the correction affects the extracted sample properties.

APPROACH

We propose the combination of HSI and 3D profilometry to correct the images using the Lambert cosine law. The feasibility of the correction method is presented first on hemispherical tissue phantoms and next on human hands before, during, and after the vascular occlusion test (VOT).

RESULTS

Seven different phantoms with known optical properties were created and imaged with a hyperspectral system. The correction method worked up to 60 deg inclination angle, whereas for uncorrected images the maximum angles were 20 deg. Imaging hands before, during, and after VOT shows good agreement between the expected and extracted skin physiological parameters.

CONCLUSIONS

The correction method was successfully applied on the images of tissue phantoms of known optical properties and geometry and VOT. The proposed method could be applied to any reflectance optical imaging technique and should be used whenever the sample parameters need to be extracted from a curved surface sample.

Erratum: Optical properties of PlatSil SiliGlass tissue-mimicking phantoms: erratum

[This corrects the article on p. 3753 in vol. 11.].

Optical properties of PlatSil SiliGlass tissue-mimicking phantoms

In this work, we revise the preparation procedure and conduct an in depth characterization of optical properties for the recently proposed silicone-based tissue-mimicking optical phantoms in the spectral range from 475 to 925 nm. The optical properties are characterized in terms of refractive index and its temperature dependence, absorption and reduced scattering coefficients and scattering phase function related quantifiers. The scattering phase function and related quantifiers of the optical phantoms are first assessed within the framework of the Mie theory by using the measured refractive index of SiliGlass and size distribution of the hollow silica spherical particles that serve as scatterers. A set of purely absorbing optical phantoms in cuvettes is used to evaluate the linearity of the absorption coefficient with respect to the concentration of black pigment that serves as the absorber. Finally, the optical properties in terms of the absorption and reduced scattering coefficients and the subdiffusive scattering phase function quantifier γ are estimated for a subset of phantoms from spatially resolved reflectance using deep learning aided inverse models. To this end, an optical fiber probe with six linearly arranged optical fibers is used to collect the backscattered light at small and large distances from the source fiber. The underlying light propagation modeling is based on the stochastic Monte Carlo method that accounts for all the details of the optical fiber probe.