Autofluorescence guided welding of heart tissue by laser pulse bursts at 1550 nm

Laser tissue welding by using collagen excitation at a 1,720 nm near-infrared optical window III

Laser tissue welding (LTW) is a method of fusing incised tissues together. LTW has the potential to revolutionize plastic surgery and wound healing techniques by its ability to produce watertight, scarless seals with minimal foreign body reaction. While using thermal mechanisms to achieve LTW, energy from the incident laser is absorbed by water in the tissue. As the water temperature increases, partial denaturing of the collagen triple helix briefly occurs, which is quickly followed by renaturation of collagen as the tissue cools, thus providing a watertight seal. This research study investigates the efficacy of direct collagen excitation at 1,720 nm to accomplish LTW. This wavelength falls within the near-infrared (NIR) optical window III. The tensile strengths of pig skin that have been welded with NIR continuous-wave (CW) diode lasers at 1,455 nm, which promote thermal mechanisms of tissue welding, and 1,720 nm wavelengths, are compared. Near-infrared lasers tuned to 1,455 and 1,720 nm were used to weld incised pieces of porcine skin together without extrinsic solders or dyes. The tensile force of the welded tissues was measured using a digital force gauge. The average tensile force of the welded pig skin using the 1,720 nm laser was approximately four times greater than that using the CW 1,455 nm laser, suggesting that LTW accomplished through direct collagen excitation in the NIR optical window III provides greater tensile strengths.

Reliable determination of pulse-shape instability in trains of ultrashort laser pulses using frequency-resolved optical gating

We describe a reliable approach for determining the presence of pulse-shape instability in a train of ultrashort laser pulses. While frequency-resolved optical gating (FROG) has been shown to successfully perform this task by displaying a discrepancy between the measured and retrieved traces for unstable trains, it fails if its pulse-retrieval algorithm stagnates because algorithm stagnation and pulse-shape instability can be indistinguishable. So, a non-stagnating algorithm-even in the presence of instability-is required. The recently introduced Retrieved-Amplitude N-grid Algorithmic (RANA) approach has achieved extremely reliable (100%) pulse-retrieval in FROG for trains of stable pulse shapes, even in the presence of noise, and so is a promising candidate for an algorithm that can definitively distinguish stable and unstable pulse-shape trains. But it has not yet been considered for trains of pulses with pulse-shape instability. So, here, we investigate its performance for unstable trains of pulses with random pulse shapes. We consider trains of complex pulses measured by second-harmonic-generation FROG using the RANA approach and compare its performance to the well-known generalized-projections (GP) algorithm without the RANA enhancements. We show that the standard GP algorithm frequently fails to converge for such unstable pulse trains, yielding highly variable trace discrepancies. As a result, it is an unreliable indicator of instability. Using the RANA approach, on the other hand, we find zero stagnations, even for highly unstable pulse trains, and we conclude that FROG, coupled with the RANA approach, provides a highly reliable indicator of pulse-shape instability. It also provides a typical pulse length, spectral width, and time-bandwidth product, even in cases of instability.

Ex Vivo Exposure to Soft Biological Tissues by the 2-μm All-Fiber Ultrafast Holmium Laser System

We present the results of ex vivo exposure by an ultrafast all-fiber Holmium laser system to porcine longissimus muscle tissues. A simple Ho-doped laser system generated ultrashort pulsed radiation with less than 1 ps pulse width and a repetition rate of 20 MHz at a central wavelength of 2.06 μm. Single-spot ex vivo experiments were performed at an average power of 0.3 W and different exposure times of 5, 30 and 60 s, varying the total applied energy in the range of 1.5–18 J. Evaluation of laser radiation exposure was performed according to the depth and diameter of coagulation zones, ablation craters and thermal damage zones during the morphological study. Exposure by ultrashort pulsed radiation with an average power of 0.3 W showed destructive changes in the muscle tissue after 5 s and nucleation of an ablative crater. The maximum ablation efficiency was about 28% at the ablation depth and diameter of 180 μm and 500 μm, respectively. The continuous-wave radiation impact at the same parameters resulted only in heating of the near-muscular tissue, without ablation and coagulation traces. Exposure to tissue with an average power at 0.3 W of ultrashort pulsed radiation led, within 30 and 60 s, to similar results as caused by 0.5 W of continuous-wave radiation, although with less carbonization formation.

Interdisciplinary Methods for Zoonotic Tissue Acellularization for Natural Heart Valve Substitute of Biomimetic Materials

The goal of this work was to create a bioactive tissue-based scaffold using multi-disciplinary engineering materials and tissue engineering techniques. Materials & methods: Physical techniques such as direct laser interference lithography and proton radiation were selected as alternative methods of enzymatic and chemical decellularization to remove cells from a tissue without degradation of the extracellular matrix nor its protein structure. This study was an attempt to prepare a functional scaffold for cell culture from tissue of animal origin using new physical methods that have not been considered before. The work was carried out under full control of the histological and molecular analysis. Results & conclusions: The most important finding was that the physical methods used to obtain the decellularized tissue scaffold differed in the efficiency of cell removal from the tissue in favour of the laser method. Both the laser method and the proton method exhibited a destructive effect on tissue structure and the genetic material in cell nuclei. This effect was visible on histology images as blurred areas within the cell nucleus. The finite element 3D simulation of decellularization process of the three-layer tissue of animal origin sample reflected well the mechanical response of tissue described by hyperelastic material models and provided results comparable to the experimental ones.