Analysis of strain estimation methods in phase-sensitive compression optical coherence elastography

In situ stress estimation in quantitative micro-elastography

In quantitative micro-elastography (QME), a pre-characterized compliant layer with a known stress-strain curve is utilized to map stress at the sample surface. However, differences in the boundary conditions of the compliant layer when it is mechanically characterized and when it is used in QME experiments lead to inconsistent stress estimation and consequently, inaccurate elasticity measurements. Here, we propose a novel in situ stress estimation method using an optical coherence tomography (OCT)-based uniaxial compression testing system integrated with the QME experimental setup. By combining OCT-measured axial strain with axial stress determined using a load cell in the QME experiments, we can estimate in situ stress for the compliant layer, more accurately considering its boundary conditions. Our proposed method shows improved accuracy, with an error below 10%, compared to 85% using the existing QME technique with no lubrication. Furthermore, demonstrations on hydrogels and cells indicate the potential of this approach for improving the characterization of the micro-scale mechanical properties of cells and their interactions with the surrounding biomaterial, which has potential for application in cell mechanobiology.

In-vivo characterization of scleral rigidity in myopic eyes using fundus-pulsation optical coherence elastography

The sclera plays an important role in the structural integrity of the eye. However, as myopia progresses, the elongation of the eyeball exerts stretching forces on the posterior sclera, which typically happens in conjunction with scleral remodeling that causes rigidity loss. These biomechanical alterations can cause localized eyeball deformation and vision impairment. Therefore, monitoring scleral rigidity is clinically important for the management and risk assessment of myopia. In this study, we propose fundus pulsation optical coherence elastography (FP-OCE) to characterize posterior scleral rigidity in living humans. This methodology is based on a choroidal pulsation model, where the scleral rigidity is inversely associated with the choroidal max strain obtained through phase-sensitive optical coherence tomography (PhS-OCT) measurement of choroidal deformation and thickness. Using FP-OCE, we conducted a pilot clinical study to explore the relationship between choroidal strain and myopia severity. The results revealed a significant increase in choroidal max strain in pathologic myopia, indicating a critical threshold beyond which scleral rigidity decreases significantly. Our findings offer a potential new method for monitoring myopia progression and evaluating therapies that alter scleral mechanical properties.

Compression OCT-elastography combined with speckle-contrast analysis as an approach to the morphological assessment of breast cancer tissue

Currently, optical biopsy technologies are being developed for rapid and label-free visualization of biological tissue with micrometer-level resolution. They can play an important role in breast-conserving surgery guidance, detection of residual cancer cells, and targeted histological analysis. For solving these problems, compression optical coherence elastography (C-OCE) demonstrated impressive results based on differences in the elasticity of different tissue constituents. However, sometimes straightforward C-OCE-based differentiation is insufficient because of the similar stiffness of certain tissue components. We present a new automated approach to the rapid morphological assessment of human breast cancer based on the combined usage of C-OCE and speckle-contrast (SC) analysis. Using the SC analysis of structural OCT images, the threshold value of the SC coefficient was established to enable the separation of areas of adipose cells from necrotic cancer cells, even if they are highly similar in elastic properties. Consequently, the boundaries of the tumor bed can be reliably identified. The joint analysis of structural and elastographic images enables automated morphological segmentation based on the characteristic ranges of stiffness (Young's modulus) and SC coefficient established for four morphological structures of breast-cancer samples from patients post neoadjuvant chemotherapy (residual cancer cells, cancer stroma, necrotic cancer cells, and mammary adipose cells). This enabled precise automated detection of residual cancer-cell zones within the tumor bed for grading cancer response to chemotherapy. The results of C-OCE/SC morphometry highly correlated with the histology-based results (r =0.96-0.98). The combined C-OCE/SC approach has the potential to be used intraoperatively for achieving clean resection margins in breast cancer surgery and for performing targeted histological analysis of samples, including the evaluation of the efficacy of cancer chemotherapy.

Recent advances in optical elastography and emerging opportunities in the basic sciences and translational medicine [Invited]

Optical elastography offers a rich body of imaging capabilities that can serve as a bridge between organ-level medical elastography and single-molecule biophysics. We review the methodologies and recent developments in optical coherence elastography, Brillouin microscopy, optical microrheology, and photoacoustic elastography. With an outlook toward maximizing the basic science and translational clinical impact of optical elastography technologies, we discuss potential ways that these techniques can integrate not only with each other, but also with supporting technologies and capabilities in other biomedical fields. By embracing cross-modality and cross-disciplinary interactions with these parallel fields, optical elastography can greatly increase its potential to drive new discoveries in the biomedical sciences as well as the development of novel biomechanics-based clinical diagnostics and therapeutics.

Integrating a pressure sensor with an OCT handheld probe to facilitate imaging of microvascular information in skin tissue beds

Optical coherence tomography (OCT) and OCT angiography (OCTA) have been increasingly applied in skin imaging applications in dermatology, where the imaging is often performed with the OCT probe in contact with the skin surface. However, this contact mode imaging can introduce uncontrollable mechanical stress applied to the skin, inevitably complicating the interpretation of OCT/OCTA imaging results. There remains a need for a strategy for assessing local pressure applied on the skin during imaging acquisition. This study reports a handheld scanning probe integrated with built-in pressure sensors, allowing the operator to control the mechanical stress applied to the skin in real-time. With real time feedback information, the operator can easily determine whether the pressure applied to the skin would affect the imaging quality so as to obtain repeatable and reliable OCTA images for a more accurate investigation of skin conditions. Using this probe, imaging of palm skin was used in this study to demonstrate how the OCTA imaging would have been affected by different mechanical pressures ranging from 0 to 69 kPa. The results showed that OCTA imaging is relatively stable when the pressure is less than 11 kPa, and within this range, the change of vascular area density calculated from the OCTA imaging is below 0.13%. In addition, the probe was used to augment the OCT monitoring of blood flow changes during a reactive hyperemia experiment, in which the operator could properly control the amount of pressure applied to the skin surface and achieve full release after compression stimulation.

Novel Elastography-Inspired Approach to Angiographic Visualization in Optical Coherence Tomography

In this paper, we present a new approach to contrast-agent-free angiographic visualization in optical coherence tomography (OCT). The proposed approach has much in common with imaging of local interframe strains in OCT-based elastography and utilizes the fact that the interframe motion of blood particles leads to discontinuity of strains within the vessel cross section. By this reasoning, we call this approach “elastography-inspired”. Here, we first elucidate the essence and main features of the elastography-inspired approach using numerical simulation of OCT data. The simulations allow one to introduce both moving scatterers imitating blood flow in vessels as well as various masking motions imitating natural motions of living “solid” tissue surrounding the vessels. Second, using real OCT signals, we present comparative results of angiographic processing using the proposed elastography-inspired approach and a realization of OCA based on high-pass filtering of temporal variability of a series of OCT B-scans. The two methods can use the same initial dataset and the high-pass filtering OCA has already been routinely applied in both animal experiments and on patients. The new elastography-inspired method has a similar computational efficiency, and it is intrinsically able to compensate spatially-inhomogeneous masking tissue motions and demonstrates high robustness with respect to motion artefacts. Thus, the new approach looks very promising for enabling wider application of OCA in both laboratory studies on animals and, most importantly, for wider clinical applications on patients.

Nonlinear Elasticity Assessment with Optical Coherence Elastography for High-Selectivity Differentiation of Breast Cancer Tissues

Soft biological tissues, breast cancer tissues in particular, often manifest pronounced nonlinear elasticity, i.e., strong dependence of their Young’s modulus on the applied stress. We showed that compression optical coherence elastography (C-OCE) is a promising tool enabling the evaluation of nonlinear properties in addition to the conventionally discussed Young’s modulus in order to improve diagnostic accuracy of elastographic examination of tumorous tissues. The aim of this study was to reveal and quantify variations in stiffness for various breast tissue components depending on the applied pressure. We discussed nonlinear elastic properties of different breast cancer samples excised from 50 patients during breast-conserving surgery. Significant differences were found among various subtypes of tumorous and nontumorous breast tissues in terms of the initial Young’s modulus (estimated for stress < 1 kPa) and the nonlinearity parameter determining the rate of stiffness increase with increasing stress. However, Young’s modulus alone or the nonlinearity parameter alone may be insufficient to differentiate some malignant breast tissue subtypes from benign. For instance, benign fibrous stroma and fibrous stroma with isolated individual cancer cells or small agglomerates of cancer cells do not yet exhibit significant difference in the Young’s modulus. Nevertheless, they can be clearly singled out by their nonlinearity parameter, which is the main novelty of the proposed OCE-based discrimination of various breast tissue subtypes. This ability of OCE is very important for finding a clean resection boundary. Overall, morphological segmentation of OCE images accounting for both linear and nonlinear elastic parameters strongly enhances the correspondence with the histological slices and radically improves the diagnostic possibilities of C-OCE for a reliable clinical outcome.