Dielectric barrier discharge plasma treatment of modified SU-8 for biosensing applications

The Design of a Glycerol Concentration Sensor Based on an LRSPP Hybrid Photonic Biosensor

A refractive index sensor based on an on-chip silicon nitride (Si₃N₄) ridge waveguide long-range surface plasmon polariton (LRSPP) is theoretically designed. The waveguide sensor consists of a gold film to enable the plasmonic resonance on top of a Cytop polymer layer. A proper finite element method was used to design and optimize the geometric parameters at the optical wavelength of 633 nm. In addition, the spectral performance was evaluated using the transfer matrix method from 580 to 680 nm. The redshifted interference spectrum results from an increasing analyte refractive index. The sensitivities of 6313 dB/cm/RIU and 251.82 nm/RIU can be obtained with a 400 nm wide and 25 nm thick Au layer. The proposed sensor has the potential for point-of-care applications considering its compactness and simplicity of construction.

Physiochemically Distinct Surface Properties of SU-8 Polymer Modulate Bacterial Cell-Surface Holdfast and Colonization

SU-8 polymer is an excellent platform for diverse applications due to its high aspect ratio of micro/nanostructure fabrication and exceptional physicochemical and biocompatible properties. Although SU-8 polymer has often been investigated for various biological applications, how its surface properties influence the interaction of bacterial cells with the substrate and its colonization is poorly understood. In this work, we tailor SU-8 nanoscale surface properties to investigate single-cell motility, adhesion, and successive colonization of phytopathogenic bacteria, Xylella fastidiosa. Different surface properties of SU-8 thin films have been prepared using photolithography processing and oxygen plasma treatment. A more significant density of carboxyl groups in hydrophilic plasma-treated SU-8 surfaces promotes faster cell motility in the earlier growth stage. The hydrophobic nature of pristine SU-8 surfaces shows no trackable bacterial motility and 5-10 times more single cells adhered to the surface than its plasma-treated counterpart. In addition, plasma-treated SU-8 samples suppressed bacterial adhesion, with surfaces showing less than 5% coverage. These results not only showcase that SU-8 surface properties can impact the spatiotemporal bacterial behavior but also provide insights into pathogens' prominent ability to evolve and adapt to different surface properties.

Electro-Optical Biosensor Based on Embedded Double-Monolayer of Graphene Capacitor in Polymer Technology

In this work, we present an interferometric polymer-based electro-optical device, integrated with an embedded double-monolayer graphene capacitor for biosensing applications. An external voltage across the capacitor applies an electric field to the graphene layers modifying their surface charge density and the Fermi level position in these layers. This in turn changes the electro-optic properties of the graphene layers making absorption in the waveguide tunable with external voltages. Simultaneously, it is possible to appreciate that this phenomenon contributes to the maximization of the light-graphene interaction by evanescent wave in the sensing area. As a result, it is obtained large phase changes at the output of the interferometer, as a function of small variations in the refractive index in the cladding area, which significantly increasing the sensitivity of the device. The optimum interaction length obtained was 1.24 cm considering a cladding refractive index of 1.33. An absorption change of 129 dB/mm was demonstrated. This result combined with the photonic device based on polymer technology may enable a low-cost solution for biosensing applications in Point of Care (PoC) platform.

Microfabrication of a color filter array utilizing colored SU-8 photoresists

Patterned color filter arrays are important components in digital cameras, camcorders, scanners, and multispectral detection and imaging instruments. In addition to the rapid and continuous progress to improve camera resolution and the efficiency of imaging sensors, research into the design of color filter arrays is important to extend the imaging capability beyond conventional applications. This paper reports the use of colored SU-8 photoresists as a material to fabricate color filter arrays. Optical properties, fabrication parameters, and pattern spatial resolution are systematically studied for five color photoresists: violet, blue, green, yellow, and red. An end-to-end fabrication process is developed to realize a five-color filter array designed for a wide angle multiband artificial compound eye camera system for pentachromatic and polarization imaging. Colored SU-8 photoresists present notable advantages, including patternability, color tunability, low-temperature compatibility, and process simplicity. The results regarding the optical properties and the fabrication process for a colored SU-8 photoresist provide significant insight into its usage as an optical material to investigate nonconventional color filter designs.

Hyperboloid-Drum Microdisk Laser Biosensors for Ultrasensitive Detection of Human IgG

Whispering gallery mode (WGM) microresonators have been used as optical sensors in fundamental research and practical applications. The majority of WGM sensors are passive resonators that require complex systems, thereby limiting their practicality. Active resonators enable the remote excitation and collection of WGM-modulated fluorescence spectra, without requiring complex systems, and can be used as alternatives to passive microresonators. This paper demonstrates an active microresonator, which is a microdisk laser in a hyperboloid-drum (HD) shape. The HD microdisk lasers are a combination of a rhodamine B-doped photoresist and a silica microdisk. These HD microdisk lasers can be utilized for the detection of label-free biomolecules. The biomolecule concentration can be as low as 1 ag mL^-1 , whereas the theoretical detection limit of the biosensor for human IgG in phosphate buffer saline is 9 ag mL^-1 (0.06 a_M ). Additionally, the biosensors are able to detect biomolecules in an artificial serum, with a theoretical detection limit of 9 ag mL^-1 (0.06 a_M ). These results are approximately four orders of magnitude more sensitive than those for the typical active WGM biosensors. The proposed HD microdisk laser biosensors show enormous detection potential for biomarkers in protein secretions or body fluids.

Trimodal Waveguide Demonstration and Its Implementation as a High Order Mode Interferometer for Sensing Application

This work implements and demonstrates an interferometric transducer based on a trimodal optical waveguide concept. The readout signal is generated from the interference between the fundamental and second-order modes propagating on a straight polymer waveguide. Intuitively, the higher the mode order, the larger the fraction of power (evanescent field) propagating outside the waveguide core, hence the higher the sensitivity that can be achieved when interfering against the strongly confined fundamental mode. The device is fabricated using the polymer SU-8 over a SiO₂ substrate and shows a free spectral range of 20.2 nm and signal visibility of 5.7 dB, reaching a sensitivity to temperature variations of 0.0586 dB/°C. The results indicate that the proposed interferometer is a promising candidate for highly sensitive, compact and low-cost photonic transducer for implementation in different types of sensing applications, among these, point-of-care.

Study of a Broadband Difference Interferometer Based on Low-Cost Polymer Slab Waveguides

A model and the waveguide parameters of a broadband, polymer-based slab waveguide difference interferometer is presented in this paper. The parameters were determined based on knowledge of the dispersion in the structure materials used to fabricate the waveguide. The impact of the waveguide layer thickness, propagation path length, and change in the waveguide cover refractive index on the output signal from the system was determined. It has been shown that the direction of the maximum shifting is determined by the thickness of the waveguide layer. A relationship describing the shift in the signal extrema for a change in the waveguide cover refractive index was derived. The results show that the use of a propagation constant simplifies the description of the interferometer. Polymer waveguides, although they have a small contrast in refractive indices, allow for large shifts in the maxima of the signal. The determined shifts in the output signal extrema for polymer waveguides are comparable, and these shifts are larger for some waveguide thicknesses compared to waveguides based on Si₃N₄.