Photoelectric switch and triple-mode frequency modulator based on dual-PIT in the multilayer patterned graphene metamaterial

Quadruple Plasmon-Induced Transparency and Dynamic Tuning Based on Bilayer Graphene Terahertz Metamaterial

This study proposes a terahertz metamaterial structure composed of a silicon-graphene-silicon sandwich, aiming to achieve quadruple plasmon-induced transparency (PIT). This phenomenon arises from the interaction coupling of bright-dark modes within the structure. The results obtained from the coupled mode theory (CMT) calculations align with the simulations ones using the finite difference time domain (FDTD) method. Based on the electric field distributions at the resonant frequencies of the five bright modes, it is found that the energy localizations of the original five bright modes undergo diffusion and transfer under the influence of the dark mode. Additionally, the impact of the Fermi level of graphene on the transmission spectrum is discussed. The results reveal that the modulation depths (MDs) of 94.0%, 92.48%, 93.54%, 96.54%, 97.51%, 92.86%, 94.82%, and 88.20%, with corresponding insertion losses (ILs) of 0.52 dB, 0.98 dB, 1.37 dB, 0.70 dB, 0.43 dB, 0.63 dB, 0.16 dB, and 0.17 dB at the specific frequencies, are obtained, achieving multiple switching effects. This model holds significant potential for applications in versatile modulators and optical switches in the terahertz range.

Polarization-sensitive multi-frequency switches and high-performance slow light based on quadruple plasmon-induced transparency in a patterned graphene-based terahertz metamaterial

A periodic patterned graphene-based terahertz metamaterial comprising three transverse graphene strips and one longitudinal continuous graphene ribbon is proposed to achieve a dynamically tunable quadruple plasmon-induced transparency (PIT) effect. Further analysis of the magnetic field distribution along the x-direction shows that the quadruple-PIT window can be produced by the strong destructive interference between the bright mode and the dark mode. The spectral response characteristics of the quadruple-PIT effect are numerically and theoretically investigated, and the results obtained by the finite-difference time-domain (FDTD) simulation fit well with that by the coupled mode theory (CMT) calculation. In addition, two hepta-frequency asynchronous switches are achieved by tuning the Fermi energy of the graphene, and their maximum modulation depths are 98.9% and 99.7%, corresponding to the insertion losses of 0.173 dB and 0.334 dB, respectively. Further studies show that polarization light has a significant impact on the quadruple-PIT, resulting in a polarization-sensitive switch being realized with a maximum modulation depth of 99.7% and a minimum insertion loss of 0.048 dB. In addition, when the Fermi energy is equal to 1.2 eV, the maximum time delay and group refractive index of the quadruple-PIT can be respectively as high as 1.065 ps and 3194, and the maximum delay-bandwidth product reaches 1.098, which means that excellent optical storage is achieved. Thus, our proposed quadruple-PIT system can be used to design a terahertz multi-channel switch and optical storage.

Multiple plasmon-induced transparency based on black phosphorus and graphene for high-sensitivity refractive index sensing

A hybrid bilayer black phosphorus (BP) and graphene structure with high sensitivity is proposed for obtaining plasmon-induced transparency (PIT). By means of surface plasmon resonance in the rectangular-ring BP structure and ribbon graphene structure, a PIT effect with high refractive index sensitivity is achieved, and the surface plasmon hybridization between graphene and anisotropic BP is analyzed theoretically. Meanwhile, the PIT effect is quantitatively described using the coupled oscillator model and the strong coherent coupling phenomena are analyzed by adjusting the coupling distance between BP and graphene, the Fermi level of graphene, and the crystal orientation of BP, respectively. The simulation results show that the refractive index sensitivity S = 7.343 THz/RIU has been achieved. More importantly, this is the first report of tunable PIT effects that can produce up to quintuple PIT windows by using the BP and graphene hybrid structure. The high refractive index sensitivity of the quintuple PIT system for each peak is 3.467 THz/RIU, 3.467 THz/RIU, 3.600 THz/RIU, 4.267 THz/RIU, 4.733 THz/RIU and 6.133 THz/RIU, respectively, which can be used for multiple refractive index sensing function.

Polarization-controlled and symmetry-dependent multiple plasmon-induced transparency in graphene-based metasurfaces

In this paper, we theoretically and numerically demonstrate a polarization-controlled and symmetry-dependent multiple plasmon-induced transparency (PIT) in a graphene-based metasurface. The unit cell of metasurface is composed of two reversely placed U-shaped graphene nanostructures and a rectangular graphene ring stacking on a dielectric substrate. By adjusting the polarization of incident light, the number of transparency windows can be actively modulated between 1 and 2 when the nanostructure keeps a geometrical symmetry with respect to the x-axis. Especially, when the rectangular graphene ring has a displacement along the y-direction, the number of transparency windows can be arbitrarily switched between 2 and 3. The operation mechanism behind the phenomena can be attributed to the near-field coupling and electromagnetic interaction between the bright modes excited in the unit of graphene resonators. Moreover, the electromagnetic simulations obtained by finite-difference time-domain (FDTD) method agree well with the theoretical results based on the coupled modes theory (CMT). In addition, as applications of the designed nanostructure, we also study the modulation degrees of amplitude, insertion loss and group index of transmission spectra for different Fermi energies, which demonstrates an excellent synchronous switch functionality and slow light effect at multiple frequencies. Our designed metasurface may have potential applications in mid-infrared optoelectronic devices, such as optical switches, modulators, and slow-light devices, etc.

Terahertz multimode modulator based on tunable triple-plasmon-induced transparency in monolayer graphene metamaterials

A simple monolayer graphene metamaterial based on silicon/silica substrates is proposed, and typical triple-plasmon-induced transparency (PIT) is realized in the terahertz band. The physical mechanism is analyzed by coupled mode theory (CMT), and the results of CMT agree well with the finite-difference time-domain simulation. A multimode electro-optical switch can be designed by dynamic tuning, and the modulation degrees of its resonant frequencies are 84.0%, 87.3%, 83.0%, 88.1%, and 76.7%. In addition, triple-PIT gradually degenerates into dual-PIT with a decrease in the length of one bright mode. Interestingly, the group index can reach 770 at Ef=0.8eV, which shows that it can be designed as a slow light device with extraordinary ability. Therefore, the results of this paper are of great significance to the research and design of electro-optical switches and slow light devices in the terahertz band.

Triple plasmon-induced transparency and dynamically tunable electro-optics switch based on a multilayer patterned graphene metamaterial

A terahertz-band metamaterial composed of multilayer patterned graphene is proposed and triple plasmon-induced transparency is excited by coupling three bright modes with one dark mode. The Lorentz curve calculated by the coupled-mode theory agrees well with the finite-difference time-domain results. Dynamic tuning is investigated by changing the Fermi level. Multimode electro-optics switching can be designed and achieved, and the amplitude modulations of four resonance frequencies are 94.3%, 92.8%, 90.7%, and 93%, respectively, which can realize the design of synchronous and asynchronous electro-optics switches. It is hoped that these results can provide theoretical support and guidance for the future design and application of photonic and optoelectronic devices.

Quadruple plasmon-induced transparency of polarization desensitization caused by the Boltzmann function

This study proposes a graphene metamaterial desensitized to the polarized angle to produce tunable quadruple plasmon-induced transparency (PIT). As a tool employed to explain the PIT, n-order coupled mode theory (CMT) is deduced for the first time and closely agrees with finite-difference time-domain (FDTD) simulations according to the quadruple PIT results in the case of n = 5. Additionally, the response of the proposed structure to the angle of polarized light is investigated. As a result, the Boltzmann function satisfied by the response of graphene strips to the polarization direction of incident light is proposed for the first time. Its property of polarization desensitization can be attributed to structural centrosymmetry, and conjugated variety which the Boltzmann functions result in. Therefore, a quintuple-mode modulation based on simultaneous electro-optical switch is realized by tuning Fermi levels within graphene. Its modulation degrees of amplitude and dephasing times are obtained. Given that the slow-light property is an important application of PIT, the n-order group index is thereby obtained. Hence, not only do the insights gained into polarization-desensitization structure provide new ideas for the design of novel optoelectronic devices, but also the results from the n-order CMT offer new research progress and references in theory.

Triple plasmon-induced transparency and optical switch desensitized to polarized light based on a mono-layer metamaterial

A mono-layer metamaterial comprising four graphene-strips and one graphene-square-ring is proposed herein to realize triple plasmon-induced transparency (PIT). Theoretical results based on the coupled mode theory (CMT) are in agreement with the simulation results obtained using the finite-difference time-domain (FDTD). An optical switch is investigated based on the characteristics of graphene dynamic modulation, with modulation degrees of the amplitude of 90.1%, 80.1%, 94.5%, and 84.7% corresponding to 1.905 THz, 2.455 THz, 3.131 THz, and 4.923 THz, respectively. Moreover, the proposed metamaterial is insensitive to the change in the angle of polarized light, for which the triple-PIT is equivalent in the cases of both x- and y-polarized light. The optical switch based on the proposed structure is effective not only for the linearly polarized light in different directions but also for left circularly polarized and right circularly polarized light. As such, this work provides insight into the design of optoelectronic devices based on the polarization characteristics of the incident light field on the optical switch and PIT.

Terahertz multifunction switch and optical storage based on triple plasmon-induced transparency on a single-layer patterned graphene metasurface

A terahertz metasurface consisting of a graphene ribbon and three graphene strips, which can generate a significant triple plasmon-induced transparency (triple-PIT), is proposed to realize a multifunction switch and optical storage. Numerical simulation triple-PIT which is the result of destructive interference between three bright modes and a dark mode can be fitted by coupled mode theory (CMT). The penta-frequency asynchronous and quatary-frequency synchronous switches can be achieved by modulating the graphene Fermi levels. And the switch performance including modulation depth (83.5% < MD < 93.5%) and insertion loss (0.10 dB < IL < 0.26 dB) is great excellent. In addition, the group index of the triple-PIT can be as high as 935, meaning an excellent optical storage is achieved. Thus, the work provides a new method for designing terahertz multi-function switches and optical storages.

Polarization-sensitive triple plasmon-induced transparency with synchronous and asynchronous switching based on monolayer graphene metamaterials

A monolayer graphene metamaterial comprising four graphene strips and four graphene blocks is proposed to produce triple plasmon-induced transparency (PIT) by the interaction of three bright modes and one dark mode. The response of the proposed structure is analyzed by using couple mode theory and finite-difference time-domain simulations, with the results of each method showing close agreement. A quadruple-mode on-to-off modulation based on synchronous or asynchronous switching is realized by tuning the Fermi levels in the graphene, its modulation degrees of amplitude are 77.7%, 58.9%, 75.4%, and 77.6% corresponding to 2.059 THz, 2.865 THz, 3.381 THz, and 3.878 THz, respectively. Moreover, the influence of the polarized light angle on triple-PIT is investigated in detail, demonstrating that the polarization angle affects PIT significantly. As a result, a multi-frequency polarizer is realized, its polarization extinction ratios are 4.2 dB, 7.8 dB, and 12.5 dB. Combined, the insights gained into the synchronous or asynchronous switching and the polarization sensitivity of triple-PIT provide a valuable platform and ideas to inspire the design of novel optoelectronic devices.