Optical fiber nanoprobe preparation for near-field optical microscopy by chemical etching under surface tension and capillary action

3D Printing of Glass Micro-Optics with Subwavelength Features on Optical Fiber Tips

Integration of functional materials and structures on the tips of optical fibers has enabled various applications in micro-optics, such as sensing, imaging, and optical trapping. Direct laser writing is a 3D printing technology that holds promise for fabricating advanced micro-optical structures on fiber tips. To date, material selection has been limited to organic polymer-based photoresists because existing methods for 3D direct laser writing of inorganic materials involve high-temperature processing that is not compatible with optical fibers. However, organic polymers do not feature stability and transparency comparable to those of inorganic glasses. Herein, we demonstrate 3D direct laser writing of inorganic glass with a subwavelength resolution on optical fiber tips. We show two distinct printing modes that enable the printing of solid silica glass structures ("Uniform Mode") and self-organized subwavelength gratings ("Nanograting Mode"), respectively. We illustrate the utility of our approach by printing two functional devices: (1) a refractive index sensor that can measure the indices of binary mixtures of acetone and methanol at near-infrared wavelengths and (2) a compact polarization beam splitter for polarization control and beam steering in an all-in-fiber system. By combining the superior material properties of glass with the plug-and-play nature of optical fibers, this approach enables promising applications in fields such as fiber sensing, optical microelectromechanical systems (MEMS), and quantum photonics.

Encaved optical fiber nano-probe exciting whispering gallery mode resonance with focused far off-axis beam

This paper demonstrates whispering gallery mode (WGM) resonance with the help of an encaved optical nano-probe developed inside an optical fiber tip cavity. The nano-probe generates a tightly focused beam with a spot-size of ∼3 µm. A barium titanate microsphere is placed besides the optical axis inside the cavity. The focused beam remains off-axis of the microresonator and excites the WGM. The off-axis excitation shows unique resonating properties depending on the location of the resonator. A resonant peak with quality factor as high as Q ∼7 × 104 is achieved experimentally. Another design with a shorter cavity length for a bigger resonator is also demonstrated by embedding a bigger microsphere on the cleaved fiber tip surface. The optical probe holds great potential for photonic devices and is ideal for studying morphology-based scattering problems.

Packaged whispering gallery resonator device based on an optical nanoantenna coupler

In this work, we present a packaged whispering gallery mode (WGM) device based on an optical nanoantenna as the coupler and a glass microsphere as the resonator. The microspheres were fabricated from either SiO₂ fiber or Er³⁺-doped fiber, the latter creating a WGM laser with a threshold of 93 µW at 1531 nm. The coupler-resonator WGM device was packaged in a glass capillary. The performance of the packaged microlaser was characterized, with lasing emission both excited in and collected from the WGM cavity via the nanoantenna. The packaged system provides isolation from environmental contamination, a small size, and unidirectional coupling while maintaining a high quality (Q-) factor (∼10⁸).

Excitation of whispering gallery modes with a "point-and-play," fiber-based, optical nano-antenna

We demonstrate the excitation and detection of whispering gallery modes in optical microresonators using a "point-and-play," fiber-based, optical nano-antenna. The coupling mechanism is based on cavity-enhanced Rayleigh scattering. Collected spectra exhibit Lorentzian dips, Fano shapes, or Lorentzian peaks, with a coupling efficiency around 13%. The spectra are characterized by the coupling gap, polarization, and fiber tip position. The coupling method is simple, low-cost and, most importantly, the Q-factor can be maintained at 10⁸ over a wide coupling range, thereby making it suitable for metrology, sensing, or cavity quantum electrodynamics experiments.

Optical fiber tip for field-enhanced second harmonic generation

We propose a simple optical fiber tip for field-enhanced second harmonic generation (SHG). The tip shows nonlinear phenomena of SHG over a wide range of sources, at least from 630 to 830 nm. The optical field corresponding to the second harmonic appears as a nondiffracting bottle beam with voids due to the surface curvature of the tip. The field-enhanced second harmonic can also induce surface plasmons, converting the tip to a plasmonic probe with reduced background signal. The tip can be useful in nanophotonics characterization. As an example, we demonstrate the tip's response as a surface-enhanced Raman spectroscopy probe.

Fabrication of corrugated Ge-doped silica fibers

We present a method of fabricating Ge-doped SiO2 fibers with corrugations around their full circumference for a desired length in the longitudinal direction. The procedure comprises three steps: hydrogenation of Ge-doped SiO2 fibers to increase photosensitivity, recording of Bragg gratings with ultraviolet light to achieve modulation of refractive index, and chemical etching. Finite-length, radially corrugated fibers may be used as couplers. Corrugated tapered fibers are used as high energy throughput probes in scanning near-field optical microscopy.