Controllable energy transfer in fluorescence upconversion of NdF3 and NaNdF4 nanocrystals

Intense Near-Infrared Light-Emitting NaYF4:Nd,Yb-Based Nanophosphors for Luminescent Solar Concentrators

In this study, we synthesized NaYF₄-based downshifting nanophosphors (DSNPs), and fabricated DSNP-polydimethylsiloxane (PDMS) composites. Nd³⁺ ions were doped into the core and shell to increase absorbance at 800 nm. Yb³⁺ ions were co-doped into the core to achieve intense near-infrared (NIR) luminescence. To further enhance the NIR luminescence, NaYF₄:Nd,Yb/NaYF₄:Nd/NaYF₄ core/shell/shell (C/S/S) DSNPs were synthesized. The C/S/S DSNPs showed a 3.0-fold enhanced NIR emission at 978 nm compared with core DSNPs under 800 nm NIR light. The synthesized C/S/S DSNPs showed high thermal stability and photostability against the irradiation with ultraviolet light and NIR light. Moreover, for application as luminescent solar concentrators (LSCs), C/S/S DSNPs were incorporated into the PDMS polymer, and the DSNP-PDMS composite containing 0.25 wt% of C/S/S DSNP was fabricated. The DSNP-PDMS composite showed high transparency (average transmittance = 79.4% for the visible spectral range of 380-750 nm). This result demonstrates the applicability of the DSNP-PDMS composite in transparent photovoltaic modules.

Influence of the Sodium Precursor on the Cubic-to-Hexagonal Phase Transformation and Controlled Preparation of Uniform NaNdF4 Nanoparticles

NaLnF₄ nanoparticles (NPs) with lighter lanthanides (where Ln = La, Ce, Nd, or Pr) are more difficult to prepare than those with heavier lanthanides [Naduviledathu et al. Chem Mater., 2014, 26, 5689]. Our knowledge is weakest for NaLnF₄ NPs with the lowest atomic mass lanthanides (Yan's group 1: La to Nd) and more advanced for group 2 (Sm to Tb) NaLnF₄ NPs [Mai et al., J. Am. Chem. Soc., 2006, 128, 6426]. Here we focus on the synthesis of NaNdF₄ NPs. We employed the high-temperature chemical coprecipitation method and explored the influence of a wide range of synthesis parameters (e.g., reaction time and temperature, precursor ratios (Na⁺/Nd³⁺ and F^-/Nd³⁺), choice of a sodium precursor (Na-oleate or NaOH), and the amount of oleic acid) on the size and uniformity of the NPs obtained. We tried to identify "sweet spots" in the reaction space that led to uniform NaNdF₄ NPs with sizes appropriate for mass tag applications in mass cytometry. We were able to obtain NPs with a variety of sizes in the range of 5-38 nm with several different shapes (e.g., polyhedra, spheres, and rods). XRD patterns recorded for aliquots collected at different reaction time intervals revealed that NaNdF₄ nucleated in the cubic phase (α) and then transformed to the hexagonal phase (β) as the reaction progressed up to 2 h. A very striking observation was that the NPs synthesized using NaOH as a reactant preferred to remain in the α-phase, and for a lower reaction temperature (285 °C), did not undergo a phase transformation to the β-phase over 2 h of reaction time. Under similar experimental conditions, NPs prepared using Na-oleate exhibited an α → β phase transformation. Nevertheless, NaNdF₄ NPs prepared at a higher temperature (315 °C) using either of the Na⁺ precursors exhibited the α → β phase transformation over time. This transition, however, appeared to be faster in the case of the NPs synthesized using Na-oleate. We found that, in many instances, syntheses carried out using Na-oleate produced more uniform NPs compared to those synthesized using NaOH. Under the conditions we employed for the Na-oleate precursor, the NPs initially formed were polydisperse spheres that evolved into irregular polyhedra and eventually formed more uniform rod-shaped NPs. The aspect ratio of the final NPs depended on the Na⁺/Nd³⁺ precursor ratio. High-resolution transmission electron micrographs and corresponding fast Fourier transform of the data provided information about the preferred growth direction of the NaNdF₄ nanorods.

Enabling Microscale Processing: Combined Raman and Absorbance Spectroscopy for Microfluidic On-Line Monitoring

Microfluidics have many potential applications including characterization of chemical processes on a reduced scale, spanning the study of reaction kinetics using on-chip liquid-liquid extractions, sample pretreatment to simplify off-chip analysis, and for portable spectroscopic analyses. The use of in situ characterization of process streams from laboratory-scale and microscale experiments on the same chemical system can provide comprehensive understanding and in-depth analysis of any similarities or differences between process conditions at different scales. A well-characterized extraction of Nd(NO₃)₃ from an aqueous phase of varying NO_{3^- (aq)} concentration with tributyl phosphate (TBP) in dodecane was the focus of this microscale study and was compared to an earlier laboratory-scale study utilizing counter current extraction equipment. Here, we verify that this same extraction process can be followed on the microscale using spectroscopic methods adapted for microfluidic measurement. Concentration of Nd (based on UV-vis) and nitrate (based on Raman) was chemometrically measured during the flow experiment, and resulting data were used to determine the distribution ratio for Nd. Extraction distributions measured on the microscale were compared favorably with those determined on the laboratory scale in the earlier study. Both micro-Raman and micro-UV-vis spectroscopy can be used to determine fundamental parameters with significantly reduced sample size as compared to traditional laboratory-scale approaches. This leads naturally to time, cost, and waste reductions.

Optically active neodymium hydroxide surface-functionalized mesoporous silica micro-cocoons for biomedical applications

Neodymium hydroxide (Nd(OH)₃)-surface modified mesoporous silica micro-cocoon microstructures were prepared using a facile single-step sol-gel chemical process. XRD revealed the semi-crystalline nature of the as-prepared materials. TEM and SEM micrographs exhibited highly monodisperse, non-aggregated, typical ordered mesoporous, and irregular sized cocoon-shaped micro-structures with a narrow size distribution. Optical properties, that were examined in the aqueous media, revealed a high colloidal stability and the formation of a semi-transparent colloidal solution. The colloidal solution of Nd(OH)₃-surface functionalized micro-structures revealed well characteristics absorption bands of Nd³⁺ ions in the visible region. thus validating the successful coating of SiO₂@Nd(OH)₃ layer over the surface silica forming core-shell structures. Zeta potential, 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium) bromide, and neutral red uptake assays were applied in a dose-dependent manner to investigate the biocompatibility and toxic potential of the designed cocoon-shaped microstructures. Both the assays and the high zeta potential value demonstrated good cell viability even at high concentrations and hydrophilic conditions, indicating excellent biocompatibility and non-toxicity. These highly hydrophilic, optically active, mesoporous, biocompatible, and non-toxic cocoon-shaped microstructures could be potentially suitable candidates for optical bio-probes and drug delivery applications.

Neodymium-Sensitized Nanoconstructs for Near-Infrared Enabled Photomedicine

Neodymium (Nd³⁺ )-sensitized nanoconstructs have gained increasing attention in recent decades due to their unique properties, especially optical properties. The design of various Nd³⁺ -sensitized nanosystems is expected to contribute to medical and health applications, due to their advantageous properties such as high penetration depth, excellent photostability, non-photobleaching, low cytotoxicity, etc. However, the low conversion efficiency and potential long-term toxicity of Nd³⁺ -sensitized nanoconstructs are huge obstacles to their clinical translations. This review article summarizes three energy transfer pathways of all kinds of Nd³⁺ -sensitized nanoconstructs focusing on the properties of Nd³⁺ ions and discusses their recent potential applications as near-infrared (NIR) enabled photomedicine. This review article will contribute to the design and fabrication of novel Nd³⁺ -sensitized nanoconstructs for NIR-enabled photomedicine, aiming for potentially safer and more efficient designs to get closer to clinical usage.

Online Monitoring of Solutions Within Microfluidic Chips: Simultaneous Raman and UV-Vis Absorption Spectroscopies

Microfluidics is an appealing analytical tool in the global effort to close the nuclear fuel cycle. Using a microfluidic chip permits the analysis of greatly reduced sample volumes compared to what is necessary for traditional analytical methods. There is a commensurate reduction in disposal volume and cost. The development of novel sensors is necessary to take full advantage of the microchip configuration, where optical-spectroscopy-based approaches offer a powerful route to characterize chemical composition. This study uses simultaneously applied UV-vis and micro-Raman spectroscopies adapted to function on the microscale to analyze in situ both the Nd³⁺ (UV-vis-active) and HNO₃ (Raman-active) concentrations in the same sample. An adjustable translation platform was designed to hold the micro-Raman probe above and perpendicular to the chip face and the UV-vis probe in the plane of the chip. These complimentary spectral techniques when processed through multivariate partial least-squares (PLS) models gave an accurate picture of the widely varying solution concentrations as a function of time for each solution component. Solution matrix effects can drastically alter analyte signatures as measured by both UV-vis absorbance and Raman spectroscopy. PLS methods successfully modeled these spectral changes and accurately measured concentrations of components of interest within the microfluidic chip.

Breakthroughs in medicine and bioimaging with up-conversion nanoparticles

Nanomedicine is a medical application of biochemistry incorporated with materials chemistry at the scale of nanometer for the purpose of diagnosis, prevention, and treatment. New models and approaches are typically associated with nanomedicine for precise multifunctional diagnostic systems at molecular level. Hence, employing nanoparticles (NPs) has unveiled new opportunities for efficient therapies and remedy of difficult-to-cure diseases. Among all types of inorganic NPs, lanthanide-doped up-conversion nanoparticles (UCNPs) have shown excellent potential for biomedical applications, especially for multimodal bioimaging including fluorescence and electron microscopy. Association of these visualization techniques plus the capability for transporting biomaterials and drugs make them superior agents in the field of nanomedicine. Accordingly, in this review, we firstly presented a fundamental understanding of physical and optical properties of UCNPs and secondly, we illustrated some of the prominent associations with bioimaging, theranostics, cancer therapy, and optogenetics.

Near-infrared light triggered drug release from mesoporous silica nanoparticles

Stimuli triggered drug delivery systems enable controlled release of drugs at the optimal space and time, thus achieving optimal therapeutic effects. As one of the most important stimuli used in bioapplications, near-infrared (NIR) light possesses unique advantages such as deep tissue penetration with minimum auto-fluorescence & tissue scattering and high biosafety. Mesoporous silica nanoparticles (MSNs) are one of the most studied nanocarriers; apart from having a high surface area and large pore volume for loading of drugs, they can be easily functionalized with inorganic nanomaterials and stimuli responsive polymers or organic switch molecules, creating possibilities for designing complex stimuli triggered drug delivery systems. Considering the high tissue penetration depth of NIR light and the unique mesoporous structure of MSNs, NIR responsive inorganic nanoparticle functionalized MSNs can be further combined with stimuli responsive materials to form smart "nano-devices" for controlled drug delivery toward tumors, and to date much progress has been made. In this article, recent advances in the design of NIR triggered mesoporous silica drug delivery systems are systematically summarized and some outstanding studies are highlighted. We will also discuss the shortcomings, challenges and opportunities in the field.

Intense Red-Emitting Upconversion Nanophosphors (800 nm-Driven) with a Core/Double-Shell Structure for Dual-Modal Upconversion Luminescence and Magnetic Resonance in Vivo Imaging Applications

In this study, intense single-band red-emitting upconversion nanophosphors (UCNPs) excited with 800 nm near-infrared (NIR) light are reported. When a NaYF₄:Nd,Yb active-shell is formed on the 12.7 nm sized NaGdF₄:Yb,Ho,Ce UCNP core, the core/shell (C/S) UCNPs show tunable emission from green to red, depending on the Ce³⁺ concentration under excitation with 800 nm NIR light. Ce³⁺-doped C/S UCNPs (30 mol %) exhibit single-band red emission peaking at 644 nm via a ⁵F₅ → ⁵I₈ transition of Ho³⁺. A high Nd³⁺ concentration in the shell results in strong absorption at around 800 nm NIR light, even though the shell thickness is not large, and small-sized C/S UCNPs (16.3 nm) emit bright red light under 800 nm excitation. The formation of a thin NaGdF₄ shell on the C/S UCNPs further enhances the upconversion (UC) luminescence and sub-20 nm sized core/double-shell (C/D-S) UCNPs exhibit 2.8 times stronger UC luminescence compared with C/S UCNPs. Owing to the strong UC luminescence intensity and Gd³⁺ ions on the surface of nanocrystals, they can be applied as a UC luminescence imaging agent and a T₁ contrast agent for magnetic resonance (MR) imaging. In vivo UC luminescence and high-contrast MR images are successfully obtained by utilizing the red-emitting C/D-S UCNPs.

808-nm-Light-Excited Lanthanide-Doped Nanoparticles: Rational Design, Luminescence Control and Theranostic Applications

808 nm-light-excited lanthanide (Ln³⁺ )-doped nanoparticles (LnNPs) hold great promise for a wide range of applications, including bioimaging diagnosis and anticancer therapy. This is due to their unique properties, including their minimized overheating effect, improved penetration depth, relatively high quantum yields, and other common features of LnNPs. In this review, the progress of 808 nm-excited LnNPs is reported, including their i) luminescence mechanism, ii) luminescence enhancement, iii) color tuning, iv) diagnostic and v) therapeutic applications. Finally, the future outlook and challenges of 808 nm-excited LnNPs are presented.

Probing the nature of upconversion nanocrystals: instrumentation matters

Understanding upconversion nanocrystals: this review intends to summarize instrumental matters related to the characterization of upconversion nanocrystals from surface structures to intrinsic properties to ultimate challenges in nanocrystal analysis at single-particle levels.

Nd3+ sensitized up/down converting dual-mode nanomaterials for efficient in-vitro and in-vivo bioimaging excited at 800 nm

Core/shell1/shell2/shell3 structured NaGdF₄:Nd/NaYF₄/NaGdF₄:Nd,Yb,Er/NaYF₄ nanocrystals were well designed and synthesized, each of the parts assume respective role and work together to achieve dual-mode upconverting (UC) and downconverting (DC) luminescence upon the low heat effect 800-nm excitation. Nd³⁺, Yb³⁺, Er³⁺ tri-doped NaGdF₄:Nd,Yb,Er UC layer [NIR (800 nm)-to-Visible (540 nm)] with a constitutional efficient 800 nm excitable property were achieved for the in-vitro bioimaging with low auto-fluorescence and photo-damage effects. Moreover, typical NIR (800 nm)-to-NIR (860–895 nm) DC luminescence of Nd³⁺ has also been realized with this designed nanostructure. Due to the low heat effect, high penetration depth of the excitation and the high efficiency of the DC luminescence, the in-vivo high contrast DC imaging of a whole body nude mouse was achieved. We believe that such dual-mode luminescence NCs will open the door to engineering the excitation and emission wavelengths of NCs and will provide a new tool for a wide variety of applications in the fields of bioanalysis and biomedical.