Two-octave supercontinuum generation in a water-filled photonic crystal fiber

Supercontinuum generation in a carbon disulfide core microstructured optical fiber

We demonstrate supercontinuum generation in a liquid-core microstructured optical fiber using carbon disulfide as the core material. The fiber provides a specific dispersion landscape with a zero-dispersion wavelength approaching the telecommunication domain where the corresponding capillary-type counterpart shows unsuitable dispersion properties for soliton fission. The experiments were conducted using two pump lasers with different pulse duration (30 fs and 90 fs) giving rise to different non-instantaneous contributions of carbon disulfide in each case. The presented results demonstrate an extraordinary high conversion efficiency from pump to soliton and to dispersive wave, overall defining a platform that enables studying the impact of non-instantaneous responses on ultrafast soliton dynamics and coherence using straightforward pump lasers and diagnostics.

Antiresonant fibers with single- and double-ring capillaries for optofluidic applications

In this work we discuss the effect of infiltration of different antiresonant fibers with low-refractive-index liquids, such as water and ethanol, on their optical properties. The fibers with single- and double-ring capillaries have been designed to show broad transmission bands in visible and near infrared range as it is required for optofluidics, in particular spectrophotometric applications. We show experimentally that their transmission windows shift toward shorter wavelengths and only modestly reduce their width. The transmission bands are located in the wavelength ranges of 533-670 nm and 707-925 nm, for the fibers when infiltrated with water. The two types of analyzed antiresonant fibers infiltrated with the liquids show similar light guidance properties when they are straight, but significantly lower bending loss can be achieved for the double-ring than for the single-ring antiresonant fiber. For this reason, the double-ring antiresonant fibers are more suitable as a compact solution for optofluidic applications, although transmission windows are reduced due to broader resonance peaks.

Highly coherent supercontinuum generation in a polarization-maintaining CS2-core photonic crystal fiber

In this paper, we design a polarization-maintaining CS₂-core photonic crystal fiber (PM-CCPCF). The two air holes in the x direction are infiltrated with C₂H₅OH in order to introduce birefringence. By optimizing the structure parameters of the PM-CCPCF, it is demonstrated that the x-polarization fundamental mode has an all-normal dispersion profile and the corresponding y-polarization fundamental mode has an anomalous dispersion profile for a pump wavelength of 1.76 μm. Then, we investigate the supercontinuum (SC) generations when different fiber lengths, pump peak powers, and pump pulse widths are chosen, respectively. Simulation results show that for the x-polarization and y-polarization fundamental modes, highly coherent SCs can be generated by appropriately choosing the fiber length and pump pulse parameters. Finally, nonlinear propagation dynamics are analysed when the optimized fiber length and pump pulse parameters are used. The bandwidth of the SCs generated for the x-polarization and y-polarization fundamental modes can be up to 0.82 and 1.26 octave, respectively.

Carbon chloride-core fibers for soliton mediated supercontinuum generation

We report on soliton-fission mediated infrared supercontinuum generation in liquid-core step-index fibers using highly transparent carbon chlorides (CCl₄, C₂Cl₄). By developing models for the refractive index dispersions and nonlinear response functions, dispersion engineering and pumping with an ultrafast thulium fiber laser (300 fs) at 1.92 μm, distinct soliton fission and dispersive wave generation was observed, particularly in the case of tetrachloroethylene (C₂Cl₄). The measured results match simulations of both the generalized and a hybrid nonlinear Schrödinger equation, with the latter resembling the characteristics of non-instantaneous medium via a static potential term and representing a simulation tool with substantially reduced complexity. We show that C₂Cl₄ has the potential for observing non-instantaneous soliton dynamics along meters of liquid-core fiber opening a feasible route for directly observing hybrid soliton dynamics.

Spectral characterization of a supercontinuum source based on nonlinear broadening in an aqueous K2ZnCl4 salt solution

We report on investigations concerning the shot-to-shot spectral stability properties of a supercontinuum source based on nonlinear processes such as self-phase modulation and optical wave-breaking in a highly concentrated K₂ZnCl₄ double salt solution. The use of a liquid medium offers both damage resistance and high third-order optical nonlinearity. Approximately 40 μJ pulses spanning a spectral range between 390 and 960 nm were produced with 3.8% RMS energy stability, using infrared input pulses of 500±50  fs FWHM durations and 2.42±0.04  mJ energies with an RMS stability of 2%. The spectral stability was quantified via acquiring single-shot spectra and studying shot-to-shot variation across a spectral range of 200-1100 nm, as well as by considering spectral correlations. The regional spectral correlation variations were indicative of nonlinear processes leading to sideband generation. Spectral stability and efficiency of energy transfer into the supercontinuum were found to weakly improve with increasing driver pulse energy, suggesting that the nonlinear broadening processes are more stable when driven more strongly, or that self-guiding effects in a filament help to stabilize the supercontinuum generation.

Hybrid soliton dynamics in liquid-core fibres

The discovery of optical solitons being understood as temporally and spectrally stationary optical states has enabled numerous innovations among which, most notably, supercontinuum light sources have become widely used in both fundamental and applied sciences. Here, we report on experimental evidence for dynamics of hybrid solitons-a new type of solitary wave, which emerges as a result of a strong non-instantaneous nonlinear response in CS2-filled liquid-core optical fibres. Octave-spanning supercontinua in the mid-infrared region are observed when pumping the hybrid waveguide with a 460 fs laser (1.95 μm) in the anomalous dispersion regime at nanojoule-level pulse energies. A detailed numerical analysis well correlated with the experiment uncovers clear indicators of emerging hybrid solitons, revealing their impact on the bandwidth, onset energy and noise characteristics of the supercontinua. Our study highlights liquid-core fibres as a promising platform for fundamental optics and applications towards novel coherent and reconfigurable light sources.Here, Chemnitz et al. report experimental evidence for hybrid solitons - a type of solitary wave, which emerges as a result of a strong non-instantaneous nonlinear response in CS2-filled liquid-core optical fibres, demonstrating efficient soliton-driven supercontinuum generation.

Versatile dispersion characteristics of water solution of glycerine in selective filling of holes in photonic crystal fibers

Using a glycerine-water solution with various concentrations, we investigate the dispersion characteristics of photonic crystal fibers by selective filling of holes. Our analysis is based on a simple but accurate semi-vectorial solution of Helmholtz's equation by the finite difference method devised with a mode-field convergence technique and crosschecked by results with those from a deeply involved multipole method. Significantly, a better ultra-flatness but near-zero group velocity dispersion is revealed with a 20% glycerine-water solution that is superior to pure water of a very recent case when the holes of the first ring of the fiber are filled. This versatile effect in management of holes of identical diameter with liquid is expected to play a guiding role in studies of supercontinuum generation.

Dispersion characteristics of a suspended-core optical fiber infiltrated with water

In this paper we present a study on the dispersion characteristics in the suspended-core optical fibers made of borosilicate of NC21A glass infiltrated with water. Replacement of air with water results in dramatic improvement of the dispersion characteristics in the fibers, valuable in the process of supercontinuum generation. A near-zero flat dispersion can be achieved in the anomalous or normal dispersion range for various diameters of the core.

Experimental investigation on supercontinuum generation by single, dual, and triple wavelength pumping in a silica photonic crystal fiber

We investigate the supercontinuum (SC) generation in an 1 cm long silica photonic crystal fiber (PCF) pumped by the pulse sources with single, dual, and triple wavelengths, respectively. The silica PCF has two zero-dispersion wavelengths at 900 and 2620 nm, respectively. When pumped by a single wavelength, the SC spectral range covers about 1000 nm. When pumped by dual and triple wavelengths, the SC spectral range covers wider than 2000 nm. Both the SC spectral range and the flatness are improved obviously when pumped by triple wavelengths. The maximum SC spectral range is obtained when the silica PCF is pumped by the triple wavelengths at 800, 1450, and 1785 nm. The SC spectral range covers 2810 nm from 350 to 3160 nm wider than three octaves. The 10 dB bandwidth covers 2280 nm from 450 to 2730 nm wider than two octaves. This is the first investigation on comparison of the SCs generated by different pump wavelengths up to three experimentally. The generated SC spectra have covered the full transmission window of silica fiber.

Femtosecond supercontinuum generation in water in the vicinity of absorption bands

We show that it is possible to overcome the perceived limitations caused by absorption bands in water so as to generate supercontinuum (SC) spectra in the anomalous dispersion regime that extend well beyond 2000 nm wavelength. By choosing a pump wavelength within a few hundred nanometers above the zero-dispersion wavelength of 1048 nm, initial spectral broadening extends into the normal dispersion regime and, in turn, the SC process in the visible strongly benefits from phase-matching and matching group velocities between dispersive radiation and light in the anomalous dispersion regime. Some of the SC spectra are shown to encompass two and a half octaves.

Prospective effect in dispersion properties of photonic crystal fibers by selective water-filling of holes

Based on a simple but accurate semivectorial solution of Helmholtz's equation by the finite difference method devised with a mode-field convergence technique, we have shown an interesting and significant effect showing an almost ultraflat zero group velocity dispersion in photonic crystal fiber when the holes of the first ring of the fiber are filled with water. Crosschecking our results with earlier results involving a deeply involved multipole method for the central core of photonic crystal fiber filled with water and fused silica, our observation in the case of filling the first ring holes with water reveals potential information in studies of supercontinuum generation.

Towards integration of a liquid-filled fiber capillary for supercontinuum generation in the 1.2-2.4 μm range

We demonstrate supercontinuum generation in unspliced as well as in integrated CS(2)-filled capillary fibers at different pump wavelengths of 1030 nm, 1510 nm, and 1685 nm. A novel method for splicing a liquid-filled capillary fiber to a standard single-mode optical fiber is presented. This method is based on mechanical splicing using a direct-laser written polymer ferrule using a femtosecond two-photon polymerization process. We maintain mostly single-mode operation despite the multi-mode capability of the liquid-filled capillaries. The generated supercontinua exhibit a spectral width of over 1200 nm and 1000 nm for core diameters of 5 μm and 10 μm, respectively. This is an increase of more than 50 percent compared to previously reported values in the literature due to improved dispersion properties of the capillaries.

Integrated hollow-core fibers for nonlinear optofluidic applications

A method to fabricate all-in-fiber liquid microcells has been demonstrated which allows for the incorporation of complex hollow-core photonic crystal fibers (HCPCFs). The approach is based on a mechanical splicing method in which the hollow-core fibers are pigtailed with telecoms fibers to yield devices that have low insertion losses, are highly compact, and do not suffer from evaporation of the core material. To isolate the PCF cores for the infiltration of low index liquids, a pulsed CO2 laser cleaving technique has been developed which seals only the very ends of the cladding holes, thus minimizing degradation of the guiding properties at the coupling region. The efficiency of this integration method has been verified via strong cascaded Raman scattering in both toluene (high index) core capillaries and ethanol (low index) core HCPCFs, for power thresholds up to six orders of magnitude lower than previous results. We anticipate that this stable, robust all-fiber integration approach will open up new possibilities for the exploration of optofluidic interactions.

Compressible octave spanning supercontinuum generation by two-pulse collisions

We demonstrate a novel method for supercontinuum generation in an optical fiber based on two-color pumping with a delay and a group velocity matching. The scheme relies on the enhanced cross-phase-modulation at an intensity induced refractive index barrier between a dispersive wave and a soliton. The generation mechanism neither incorporates soliton fission nor a modulation instability and therefore exhibits extraordinary coherence properties, enabling the temporal compression of octave bandwidth into a short pulse. Moreover, the properties of the supercontinuum are adjustable over a wide range in the frequency domain by suitable choice of the dispersive wave.

Dispersion properties of liquid-core photonic crystal fibers

Dispersion properties of liquid-core photonic crystal fibers (PCFs) with large air fraction in clads between 300 to 2000 nm have been calculated by a multipole method for various liquids including CS(2), toluene, chloroform, and water for different core diameters. In calculations, air holes are assumed to be arranged in a regular hexagonal array in fused silica, and a central hole is filled with liquid to create a core. The results are compared with those obtained by a fully vectorial effective index method, and fitting parameters for core sizes are found for each liquid except for water, where the latter method does not give correct dispersions at short wavelengths. Also, the power ratios inside liquid cores and effective core areas were calculated at different wavelengths.

Integrated liquid-core optical fibers for ultra-efficient nonlinear liquid photonics

We have developed a novel integrated platform for liquid photonics based on liquid core optical fiber (LCOF). The platform is created by fusion splicing liquid core optical fiber to standard single-mode optical fiber making it fully integrated and practical - a major challenge that has greatly hindered progress in liquid-photonic applications. As an example, we report here the realization of ultralow threshold Raman generation using an integrated CS₂ filled LCOF pumped with sub-nanosecond pulses at 532 nm and 1064 nm. The measured energy threshold for the Stokes generation is 1nJ, about three orders of magnitude lower than previously reported values in the literature for hydrogen gas, a popular Raman medium. The integrated LCOF platform opens up new possibilities for ultralow power nonlinear optics such as efficient white light generation for displays, mid-IR generation, slow light generation, parametric amplification, all-optical switching and wavelength conversion using liquids that have orders of magnitude larger optical nonlinearities compared with silica glass.

All-optical switching based on inverse Raman scattering in liquid-core optical fibers

We report on a new platform for all-optical switching based on inverse Raman scattering in liquids. Narrowband switching, which could be suitable for wavelength-division-multiplexed applications, is demonstrated using integrated liquid-core optical fiber infiltrated with both neat liquids (CCl(4) and CS(2)) as well as an organic chromophore (β-carotene) dissolved in CCl(4). Compared to standard glass optical fibers, these liquids have much larger Raman loss coefficients, which help reduce the pump power by at least an order of magnitude. Further improvements can be expected with the development of highly soluble organic compounds possessing large Raman cross sections.

Generalized retarded response of nonlinear media and its influence on soliton dynamics

We demonstrate by means of numerical simulations of the generalized Nonlinear Schrödinger Equation that the retarded response of a nonlinear medium embedded in a single hole of a photonic crystal fiber crucially affects the spectrum generated by ultrashort laser pulses. By introducing a hypothetic medium with fixed dispersion and nonlinearity and with a variable retarded response, we are able to separate the influence of the retarded response from other effects. We show that the fission length of a launched higher-order soliton dramatically increases if the characteristic time of the retarded response is close to the input pulse duration. Furthermore, we investigate the effect of the retarded response on the soliton self-frequency shift and find that the optimum input pulse duration for maximizing the spectral width has to be shortened for a larger characteristic retarded response time. Our work has important implications on future studies of spatiotemporal solitons in selectively liquid-filled photonic crystal fibers.

Ultrafast nonlinear optofluidics in selectively liquid-filled photonic crystal fibers

Selective filling of photonic crystal fibers with different media enables a plethora of possibilities in linear and nonlinear optics. Using two-photon direct-laser writing we demonstrate full flexibility of individual closing of holes and subsequent filling of photonic crystal fibers with highly nonlinear liquids. We experimentally demonstrate solitonic supercontinuum generation over 600 nm bandwidth using a compact femtosecond oscillator as pump source. Encapsulating our fibers at the ends we realize a compact ultrafast nonlinear optofluidic device. Our work is fundamentally important to the field of nonlinear optics as it provides a new platform for investigations of spatio-temporal nonlinear effects and underpins new applications in sensing and communications. Selective filling of different linear and nonlinear liquids, metals, gases, gain media, and liquid crystals into photonic crystal fibers will be the basis of new reconfigurable and versatile optical fiber devices with unprecedented performance. Control over both temporal and spatial dispersion as well as linear and nonlinear coupling will lead to the generation of spatial-temporal solitons, so-called optical bullets.