Pixel-isolation liquid crystals formed by polarization-selective UV-curing of a prepolymer containing cinnamate oligomer

Preparation of Highly Durable Reverse-Mode Polymer-Stabilized Liquid Crystal Films with Polymer Walls

Reverse-mode polymer-stabilized liquid crystal (PSLC) films have wide applications in smart windows for cars as well as buildings and dimming glasses due to their low haze, low energy consumption, and better safety in case of emergency power off. However, PSLC films usually have poor stability of electro-optical properties due to their low polymer content (ca. 5 wt %), and it still remains a challenging task to improve the stability and processability by increasing the polymer content in PSLC as the driving voltage might dramatically increase. In this work, a reverse-mode PSLC film with polymer walls was prepared, which showed excellent stability of electro-optical properties even after 150 000 cycles. The film was prepared through polymerization with a photomask, in which the monomers concentrated on specific areas to form patterned polymer walls. In this way, the polymer content could be increased dramatically and the anchoring effect would not be too strong, thus avoiding a sharp increase in the driving voltage. As a result, the desired reverse-mode film with high stability, relatively low driving voltage, and high contrast ratio was obtained. The effects of monomer compositions, curing temperature, UV light intensity, and the pattern of the photomask on the microstructures, as well as electro-optical performances of the films were carefully studied. This work provides a new idea for the preparation of reverse-mode electrically switchable light-transmittance controllable films with excellent stability and good electro-optical performance, which would broaden their application in smart cars, building windows, and dimming glasses for light management and potential energy saving.

Lattice-patterned LC-polymer composites containing various nanoparticles as additives

In this study, we show the effect of various nanoparticle additives on phase separation behavior of a lattice-patterned liquid crystal [LC]-polymer composite system and on interfacial properties between the LC and polymer. Lattice-patterned LC-polymer composites were fabricated by exposing to UV light a mixture of a prepolymer, an LC, and SiO2 nanoparticles positioned under a patterned photomask. This resulted in the formation of an LC and prepolymer region through phase separation. We found that the incorporation of SiO2 nanoparticles significantly affected the electro-optical properties of the lattice-patterned LC-polymer composites. This effect is a fundamental characteristic of flexible displays. The electro-optical properties depend on the size and surface functional groups of the SiO2 nanoparticles. Compared with untreated pristine SiO2 nanoparticles, which adversely affect the performance of LC molecules surrounded by polymer walls, SiO2 nanoparticles with surface functional groups were found to improve the electro-optical properties of the lattice-patterned LC-polymer composites by increasing the quantity of SiO2 nanoparticles. The surface functional groups of the SiO2 nanoparticles were closely related to the distribution of SiO2 nanoparticles in the LC-polymer composites, and they influenced the electro-optical properties of the LC molecules. It is clear from our work that the introduction of nanoparticles into a lattice-patterned LC-polymer composite provides a method for controlling and improving the composite's electro-optical properties. This technique can be used to produce flexible substrates for various flexible electronic devices.