Coherent frequency-down-conversion interface for quantum repeaters

Tunable frequency matching for efficient four-wave-mixing Bragg scattering in microrings

We propose and theoretically study a tunable frequency matching method for four-wave-mixing Bragg-scattering frequency conversion in microring resonators. A tunable coupling between the clockwise and counterclockwise propagating modes in the resonators was designed to introduce adjustable mode splitting, thus compensating for the frequency mismatching under different wavelengths. Using a silicon nitride ring resonator as an example, we showed that the tuning bandwidth approaches 35 number of FSRs. Numerical simulations further revealed that the phase-matching strategy is valid under different wavelength combinations and is robust to variations in waveguide geometry and fabrication. These results suggest promising applications in high-efficiency frequency conversion, integrated nonlinear photonics, and quantum optics.

Low random duty-cycle errors in periodically poled KTP revealed by sum-frequency generation

Low-noise quantum frequency conversion in periodically poled nonlinear crystals has proved challenging when the pump wavelength is shorter than the target wavelength. This is-at least in large part-a consequence of the parasitic spontaneous parametric downconversion of pump photons, whose efficiency is increased by fabrication errors in the periodic poling. Here we characterize the poling quality of commercial periodically poled bulk potassium titanyl phosphate (ppKTP) by measuring the sum-frequency generation (SFG) efficiency over a large phase mismatch range from 0 to more than 400π. Over the probed range, the SFG efficiency behaves nearly ideally and drops to a normalized efficiency of 10^-6. Our results demonstrate that any background pedestal that would be formed by random duty-cycle errors in ppKTP is substantially reduced when compared to periodically poled lithium niobate. The standard deviation of the random duty-cycle errors can be estimated to be smaller than 2% of the domain length. From this, we expect a noise spectral density that is at least 1 order of magnitude smaller than that of current state-of-the-art single-step frequency converters.

Efficient Frequency Conversion in a Degenerate χ^{(2)} Microresonator

Microresonators on a photonic chip could enhance nonlinear optics effects and thus are promising for realizing scalable high-efficiency frequency conversion devices. However, fulfilling phase matching conditions among multiple wavelengths remains a significant challenge. Here, we present a feasible scheme for degenerate sum-frequency conversion that only requires the two-mode phase matching condition. When the drive and the signal are both near resonance to the same telecom mode, an on-chip photon-number conversion efficiency up to 42% is achieved, showing a broad tuning bandwidth over 250 GHz. Furthermore, cascaded Pockels and Kerr nonlinear optical effects are observed, enabling the parametric amplification of the optical signal to distinct wavelengths in a single device. The scheme demonstrated in this Letter provides an alternative approach to realizing high-efficiency frequency conversion and is promising for future studies on communications, atom clocks, sensing, and imaging.

Cascaded downconversion interface to convert single-photon-level signals at 650 nm to the telecom band

We present a device designed for two-step downconversion of single-photon-level signals at 650 nm to the 1.5-μm band with low excess noise and low required pump power as a quantum interface between matter-qubit-based nodes and low-loss photonic channels for quantum communication networks. The required pump power for this interface is around 60% of that for a comparable conventional single-pass device, which reduces the demand on the pump laser and yields a corresponding reduction in dark counts due to inelastic pump scattering. The single-photon-level signal at 649.7 nm is downconverted to the telecom band using a fiber-coupled reverse proton exchange periodically poled lithium niobate waveguide and a 2.19-μm pump laser. By testing the device in the linear regime with a classical input, we achieved 99% depletion efficiency for each stage, corresponding to an internal quantum efficiency of 63% at the optimum pump power for the complete cascaded process.

Coherent frequency bridge between visible and telecommunications band for vortex light

In quantum communications, vortex photons can encode higher-dimensional quantum states and build high-dimensional communication networks (HDCNs). The interfaces that connect different wavelengths are significant in HDCNs. We construct a coherent orbital angular momentum (OAM) frequency bridge via difference frequency conversion in a nonlinear bulk crystal for HDCNs. Using a single resonant cavity, maximum quantum conversion efficiencies from visible to infrared are 36%, 15%, and 7.8% for topological charges of 0,1, and 2, respectively. The average fidelity obtained using quantum state tomography for the down-converted infrared OAM-state of topological charge 1 is 96.51%. We also prove that the OAM is conserved in this process by measuring visible and infrared interference patterns. This coherent OAM frequency-down conversion bridge represents a basis for an interface between two high-dimensional quantum systems operating with different spectra.

Orbital angular momentum photonic quantum interface

Light-carrying orbital angular momentum (OAM) has great potential in enhancing the information channel capacity in both classical and quantum optical communications. Long distance optical communication requires the wavelengths of light are situated in the low-loss communication windows, but most quantum memories currently being developed for use in a quantum repeater work at different wavelengths, so a quantum interface to bridge the wavelength gap is necessary. So far, such an interface for OAM-carried light has not been realized yet. Here, we report the first experimental realization of a quantum interface for a heralded single photon carrying OAM using a nonlinear crystal in an optical cavity. The spatial structures of input and output photons exhibit strong similarity. More importantly, single-photon coherence is preserved during up-conversion as demonstrated.

Quantum frequency down-conversion of bright amplitude-squeezed states

We demonstrate experimentally the quantum frequency down-conversion of a bright amplitude-squeezed optical field via a high efficiency difference frequency generation process. 532 nm amplitude-squeezed light with squeezing of 1.0 dB is successfully translated to 810 nm amplitude-squeezed light with squeezing of 0.8 dB. The effects of amplitude and phase fluctuations of the pump field on the frequency conversion are investigated both theoretically and experimentally. It is shown that the quantum frequency down-conversion is insensitive to small amplitude fluctuations of the pump field at the optimal conversion point. However, the phase fluctuations of the pump field can lead to increase of noise in the phase quadrature of the down-converted field. To eliminate the additive phase noise, a dual frequency down-converter which utilizing common pump field is proposed and demonstrated.

Frequency down-conversion of 637 nm light to the telecommunication band for non-classical light emitted from NV centers in diamond

We demonstrate a low-noise frequency down-conversion of photons at 637 nm to the telecommunication band at 1587 nm by the difference frequency generation in a periodically-poled lithium niobate. An internal conversion efficiency of the converter is estimated to be 0.44 at the maximum which is achieved by a pump power of 0.43 W, whereas a rate of internal background photons caused by the strong cw pump laser is estimated to be 9 kHz/mW within a bandwidth of about 1 nm. By using the experimental values related to the intrinsic property of the converter, and using the intensity correlation and the average photon number of a 637 nm input light pulse, we derive the intensity correlation of a converted telecom light pulse. Then we discuss feasibility of a single-photon frequency conversion to the telecommunication band for a long-distance quantum communication based on NV centers in diamond.

Observation of two output light pulses from a partial wavelength converter preserving phase of an input light at a single-photon level

We experimentally demonstrate that both of the two output light pulses of different wavelengths from a wavelength converter with various branching ratios preserve phase information of an input light at a single-photon level. In our experiment, we converted temporally-separated two coherent light pulses with average photon numbers of ∼ 0.1 at 780 nm to light pulses at 1522 nm by using difference-frequency generation in a periodically-poled lithium niobate waveguide. We observed an interference between temporally-separated two modes for both the converted and the unconverted light pulses at various values of the conversion efficiency. We observed interference visibilities greater than 0.88 without suppressing the background noises for any value of the conversion efficiency the wavelength converter achieves. At a conversion efficiency of ∼ 0.5, the observed visibilities are 0.98 for the unconverted light and 0.99 for the converted light. Such a phase-preserving wavelength converter with high visibilities will be useful for manipulating quantum states encoded in the frequency degrees of freedom.

Quantum frequency conversion of quantum memory compatible photons to telecommunication wavelengths

We report an experiment demonstrating quantum frequency conversion of weak light pulses compatible with atomic quantum memories to telecommunication wavelengths. We use a PPLN nonlinear waveguide to convert weak coherent states at the single photon level with a duration of 30 ns from a wavelength of 780 nm to 1552 nm. We measure a maximal waveguide internal (external) conversion efficiency η(int) = 0.41 (η(ext) = 0.25), and we show that the signal to noise ratio (SNR) is good enough to reduce the input photon number below 1. In addition, we show that the noise generated by the pump beam in the crystal is proportional to the spectral bandwidth of the device, suggesting that narrower filtering could significantly increase the SNR. Finally, we demonstrate that the quantum frequency converter can operate in the quantum regime by converting a time-bin qubit and measuring the qubit fidelity after conversion.

Downconversion quantum interface for a single quantum dot spin and 1550-nm single-photon channel

Long-distance quantum communication networks require appropriate interfaces between matter qubit-based nodes and low-loss photonic quantum channels. We implement a downconversion quantum interface, where the single photons emitted from a semiconductor quantum dot at 910 nm are downconverted to 1560 nm using a fiber-coupled periodically poled lithium niobate waveguide and a 2.2-μm pulsed pump laser. The single-photon character of the quantum dot emission is preserved during the downconversion process: we measure a cross-correlation g(2)(τ = 0) = 0.17 using resonant excitation of the quantum dot. We show that the downconversion interface is fully compatible with coherent optical control of the quantum dot electron spin through the observation of Rabi oscillations in the downconverted photon counts. These results represent a critical step towards a long-distance hybrid quantum network in which subsystems operating at different wavelengths are connected through quantum frequency conversion devices and 1.5-μm quantum channels.

Visible-to-telecom quantum frequency conversion of light from a single quantum emitter

We demonstrate efficient (>30%) quantum frequency conversion of visible single photons (711 nm) emitted by a quantum dot to a telecom wavelength (1313 nm). Analysis of the first- and second-order coherence before and after wavelength conversion clearly proves that pivotal properties, such as the coherence time and photon antibunching, are fully conserved during the frequency translation process. Our findings underline the great potential of single photon sources on demand in combination with quantum frequency conversion as a promising technique that may pave the way for a number of new applications in quantum technology.

Efficient frequency downconversion at the single photon level from the red spectral range to the telecommunications C-band

We report on single photon frequency downconversion from the red part of the spectrum (738 nm) to the telecommunications C-band. By mixing attenuated laser pulses with an average photon number per pulse < 1 with a strong continuous light field at 1403 nm in a periodically poled Zn:LiNbO3 ridge waveguide an internal conversion efficiency of ∼ 73% is achieved. We further investigate the noise properties of the process by measuring the output spectrum. Our results indicate that by narrow spectral filtering a quantum interface should be feasible which bridges the wavelength gap between quantum emitters like color centers in diamond emitting in the red part of the spectrum and low-loss fiber-optic telecommunications wavelengths.