Super-sensitivity in label-free protein sensing using a nanoslot nanolaser

Design of a High Q-Factor Label-Free Optical Biosensor Based on a Photonic Crystal Coupled Cavity Waveguide

In recent years, there has been a significant increase in research into silicon-based on-chip sensing. In this paper, a coupled cavity waveguide (CCW) based on a slab photonic crystal structure was designed for use as a label-free biosensor. The photonic crystal consisted of holes arranged in a triangular lattice. The incorporation of defects can be used to design sensor devices, which are highly sensitive to even slight alterations in the refractive index with a small quantity of analyte. The plane wave expansion method (PWE) was used to study the dispersion and profile of the CCW modes, and the finite difference time domain (FDTD) technique was used to study the transmission spectrum, quality factor, and sensitivity. We present an analysis of adiabatically coupling light into a coupled cavity waveguide. The results of the simulation indicated that a sensitivity of 203 nm/RIU and a quality factor of 13,360 could be achieved when the refractive indices were in the range of 1.33 to 1.55.

Biomimetic design of photonic materials for biomedical applications

Photonic crystal (PC) materials with bio-inspired structure colors have drawn increasing attention as their potentials have been rapidly progressed in the field of biomedicine. After elaborate integration with smart materials or preparations through advanced techniques, PC materials have shown significant advantages in biosensing, bio-probing, bio-screening, tissue engineering, and so forth. In this review, we first introduced the fundamentals of PC materials as well as their fabrication strategies with different dimensional outputs. Based on these diversified PC materials, their biomedical potentials as biosensing elements, cell carriers, drug delivery systems, screening methods, cell scaffolds for tissue engineering, cell imaging probes, as well as the monitoring means for biological processes were then highlighted. In addition to these, we finally listed and discussed some emerging applications of PCs integrated with functional materials and newly developed material engineering technologies. In short, this review will provide a panoramic view of PCs-based biomedicines, and moreover, the progressive discussions from fundamentals to advanced applications in this review may also encourage researchers to innovate PC materials or devices for broader biomedical applications.

Feasibility of Using High-Contrast Grating as a Point-of-Care Sensor for Therapeutic Drug Monitoring of Immunosuppressants

Point-of-care (POC) testing has demonstrated great transformative potential in personalized medicine. In particular, patients undergoing transplantation require POC testing to ensure appropriate serum immunosuppressant levels so as to maintain adequate graft function and survival. However, no suitable POC device for monitoring immunosuppressant levels is currently available. Exploiting the latest advances in metamaterials can lead to a breakthrough in POC testing. A high-contrast grating (HCG) biosensor is a low-cost, compact, simple-to-fabricate, and easy-to-operate structure. It is highly sensitive and robust in surface-based biomarker detection, which is favorable for the efficiency of a POC device. In this study, the feasibility of using an HCG as a POC sensor for therapeutic drug monitoring of immunosuppressants was evaluated. The detection efficiency of the most commonly prescribed immunosuppressive medication cyclosporine A by using this sensor was demonstrated to be comparable to those of conventional commercial kits, suggesting that the sensor has the potential to be used as a rapid detection and feedback platform for increasing drug compliance and improving new organ transplant survival.

Enhanced pH sensitivity in photoluminescence of GaInAsP semiconductor photonic crystal slab

Semiconductor ion sensors that respond to the surface electric charge in a solution are used for chemical and biological sensing. Photonic sensors exploiting such a response in the photoluminescence intensity enable a simple system consisting only of a photopump source and a photodiode; however, their sensitivity is usually lower than that of electric sensors, such as ion-sensitive field-effect transistors. This study employed a GaInAsP semiconductor honeycomb photonic crystal slab as a photonic sensor structure and obtained a high ion sensitivity. The surface recombination, which is the origin of the ion sensitivity, was enhanced by increasing the surface-to-volume ratio and moderately suppressing the photopump level. Nevertheless, a sufficient signal-to-noise ratio was maintained by improving the light extraction efficiency. Moreover, a high pH sensitivity of 0.27 dB/pH, which is six times that without photonic crystals, was obtained and resulted in a pH resolution of 0.011 at pH ∼7 comparable with that of electric sensors.

Photonic and Iontronic Sensing in GaInAsP Semiconductor Photonic Crystal Nanolasers

The GaInAsP semiconductor photonic crystal nanolaser operates at room temperature by photopumping and emits near-infrared light at a wavelength longer than 1.3 μm. Immersion of the nanolaser in a solution causes its laser characteristics to change. Observation of this phenomenon makes it possible to perform biosensing without a fluorescent label or a chromogenic substrate. The most common phenomenon between many photonic sensors is that the resonance wavelength reflects the refractive index of attached media; an index change of 2.5 × 10−4 in the surrounding liquid can be measured through an emission wavelength shift without stabilization. This effect is applicable to detecting environmental toxins and cell behaviors. The laser emission intensity also reflects the electric charge of surface ions. The intensity varies when an electrolyte or a negatively charged deoxyribonucleic acid (DNA), which is positively or negatively charged in water, is accumulated on the surface. This effect allows us to detect the antigen-antibody reaction of a biomarker protein from only the emission intensity without any kind of spectroscopy. In detecting a small amount of DNA or protein, a wavelength shift also appears from its concentration that is 2–3 orders of magnitude lower than those of the conventional chemical methods, such as the enzyme-linked immuno-solvent assay. It is unlikely that this wavelength behavior at such low concentrations is due to the refractive index of the biomolecules. It is observed that the electric charge of surface ions is induced by various means, including plasma exposure and an electrochemical circuit shifting the wavelength. This suggests that the superhigh sensitivity is also due to the effect of charged ions. Thus, we call this device an iontronic photonic sensor. This paper focuses on such a novel sensing scheme of nanolaser sensor, as an example of resonator-based photonic sensors, in addition to the conventional refractive index sensing.

Label-Free Optical Single-Molecule Micro- and Nanosensors

Label-free optical sensor systems have emerged that exhibit extraordinary sensitivity for detecting physical, chemical, and biological entities at the micro/nanoscale. Particularly exciting is the detection and analysis of molecules, on miniature optical devices that have many possible applications in health, environment, and security. These micro- and nanosensors have now reached a sensitivity level that allows for the detection and analysis of even single molecules. Their small size enables an exceedingly high sensitivity, and the application of quantum optical measurement techniques can allow the classical limits of detection to be approached or surpassed. The new class of label-free micro- and nanosensors allows dynamic processes at the single-molecule level to be observed directly with light. By virtue of their small interaction length, these micro- and nanosensors probe light-matter interactions over a dynamic range often inaccessible by other optical techniques. For researchers entering this rapidly advancing field of single-molecule micro- and nanosensors, there is an urgent need for a timely review that covers the most recent developments and that identifies the most exciting opportunities. The focus here is to provide a summary of the recent techniques that have either demonstrated label-free single-molecule detection or claim single-molecule sensitivity.

Fluorescence-based kinetic analysis of miniaturized protein microarrays

Ideal monitoring devices should enjoy a combination of characteristics, e.g. high sensitivity, multiplexing, portability, short time-to-result (TTR). Typically, no device meets all of these demands since some of them are contradictory, to some extent. Herein, we present a miniaturized platform based on fluorescent detection, which is sensitive, readily allows multiplexing, and allows real-time monitoring of the signal, thus allowing extraction of kinetic information as well as drastic reduction of TTR. This is achieved via miniaturization of active spots, integration with microfluidics, and algorithmic approaches. We validate its performance by comparing with evanescent field excitation, which obtains similar results, however without the addition of the necessary complex hardware.

Ion-sensitive photonic-crystal nanolaser sensors

In general, biochemical sensors based on photonic cavities are used to detect changes in the refractive index of the environment. In this study, however, a GaInAsP semiconductor photonic-crystal nanolaser sensor that we recently developed was found to detect not only the environmental refractive index but also the surface charge. In contrast to the pH sensitivity we reported previously, this is an ultra-sensitive detection mechanism capable of identifying proteins and deoxyribonucleic acids (DNA) at a femtomolar-order or lower concentrations. When the device is exposed to plasma or DNA solutions, the laser wavelength simultaneously changes with the zeta potential and the flat-band potential of the semiconductor surface. This indicates that the charged functional groups on the surface, which are formed by these treatments, modify the Schottky barrier near the semiconductor surface, trap the excited carriers in the barrier, and change the refractive index of the semiconductor via the carrier effects. These findings also suggest that some other photonic sensors may also exhibit similar electrochemical and optoelectronic effects.

Design of a New Ultracompact Resonant Plasmonic Multi-Analyte Label-Free Biosensing Platform

In this paper, we report on the design of a bio-multisensing platform for the selective label-free detection of protein biomarkers, carried out through a 3D numerical algorithm. The platform includes a number of biosensors, each of them is based on a plasmonic nanocavity, consisting of a periodic metal structure to be deposited on a silicon oxide substrate. Light is strongly confined in a region with extremely small size (=1.57 μm²), to enhance the light-matter interaction. A surface sensitivity S_s = 1.8 nm/nm has been calculated together with a detection limit of 128 pg/mm². Such performance, together with the extremely small footprint, allow the integration of several devices on a single chip to realize extremely compact lab-on-chip microsystems. In addition, each sensing element of the platform has a good chemical stability that is guaranteed by the selection of gold for its fabrication.

Self-aligned nanoislands nanobeam bandedge lasers

We propose and demonstrate a novel one-dimensional nanobeam bandedge laser constituted by self-aligned nanoisland quantum-well (QW) structures. The formation of self-aligned InGaAsP nanoislands sandwiched between two InP claddings is the result of selective removal of QW through wet-etching processes. By controlling wet-etching time, we show a good spatial and spectral overlap between the dielectric mode and the self-aligned nanoisland structures leads to the realization of nanobeam bandedge lasers with low-threshold operations and high slope efficiencies. Optical characterization results indicate a strong correlation between the size of individual nanoisland and the threshold power of our nanobeam bandedge lasers. We obtain an approximately 81% reduction in the absorbed threshold power as we optimize the size of the nanoislands.

Kerr-induced controllable adiabatic frequency conversion in an ultrahigh Q silica toroid microcavity

In this Letter, we report, based on our knowledge, the first demonstration of Kerr-induced adiabatic frequency conversion in a silica toroid microcavity. Taking advantage of the instantaneous response of the Kerr effect, we achieved adiabatic frequency conversion with a controllable amount of frequency shift and time width. In addition, thanks to the combination of the Kerr effect and the ultrahigh Q (>10⁷) of the silica toroid microcavity, we also observed multiple frequency conversion within a photon lifetime. Furthermore, use of the Kerr effect allowed us to investigate the influence of the relative phase between the original and converted light.

Sensitive and selective detection of prostate-specific antigen using a photonic crystal nanolaser

The detection of low-concentration biomarkers is expected to facilitate the early diagnosis of severe diseases, including malignant tumors. Using photonic crystal nanolaser sensors, we detected prostate-specific antigen (PSA) from a concentration of 1 fM, which is difficult to detect by conventional enzyme-linked immunosorbent assay. The signal intensity and stability were improved by using a surfactant (i.e., ethanolamine). Even when a contaminant such as bovine serum albumin was mixed into the PSA sample, thereby increasing the concentration of the contaminant ten billion times, it was still possible to maintain a high level of detection.

High-contrast grating resonators for label-free detection of disease biomarkers

A label-free optical biosensor is described that employs a silicon-based high-contrast grating (HCG) resonator with a spectral linewidth of ~500 pm that is sensitive to ligand-induced changes in surface properties. The device is used to generate thermodynamic and kinetic data on surface-attached antibodies with their respective antigens. The device can detect serum cardiac troponin I, a biomarker of cardiac disease to 100 pg/ml within 4 mins, which is faster, and as sensitive as current enzyme-linked immuno-assays for cTnI.

Cell imaging using GaInAsP semiconductor photoluminescence

We demonstrate label-free imaging of living cells using a GaInAsP semiconductor imaging plate. The photoluminescence (PL) intensity is changed by immersing the semiconductor wafer in different pH solutions and by depositing charged polyelectrolytes on the wafer. Various observations indicate that this phenomenon arises from the radiative and surface recombination rates modified by the Schottky barrier at the charged semiconductor surface. HeLa cancer cells were cultured on the semiconductor, and PL was observed using a near-infrared camera. The semiconductor areas with the cells attached exhibited characteristic PL profiles, which might reflect the attachment and surface condition of the cells, cellular matrix, and other substances.

Asymmetric out-of-plane power distribution in a two-dimensional photonic crystal nanocavity

Conventional air-bridge two-dimensional photonic crystal (2D-PhC) nanocavities emit light with an equal power distribution for upward and downward out-of-plane directions. Some applications, however, require concentration of the radiation in a preferred direction. In this Letter, we design a 2D-PhC nanocavity that radiates dominantly into one of the out-of-plane directions with a narrow far-field distribution. Our design is based on a conventional air-bridge L3 photonic crystal nanocavity. The asymmetric out-of-plane power distribution is achieved solely by adding periodic shallow holes on the slab surface, which also function as a second-order grating for the directional beaming.

Living-cell imaging using a photonic crystal nanolaser array

We proposed and demonstrated a label-free imaging method for living cells using a GaInAsP H0-type photonic crystal nanolaser array. We integrated 441 nanolasers in an arrayed configuration and achieved photopumped lasing with a 100% yield. Then, we attached HeLa cells on it, measured the wavelengths of all nanolasers and used them as pixel information. We acquired cell images, which partially corresponds to optical micrographs and probably reflects the attachment condition of the cells. We improved the refractive index resolution from ~10(-2) to 2 × 10(-3) by incorporating a nanoslot into each nanolaser and compensating the nonuniformity of each index sensitivity.

Sensing operations based on hexagonal GaN microdisks acting as whispering-gallery mode optical microcavities

Using room temperature photoluminescence measurements, we have demonstrated a sensing operation based on hexagonal GaN microdisks with a side length of approximately 1.5 μm that acted as optical microcavities. In the experiment, the optical microresonant systems based on the whispering-gallery mode (WGM) in the microdisks were affected by their ambient conditions, resulting in shifts of the lasing wavelength by varying the mixing ratios of isopropanol and o-xylene. We also obtained such shifts for aqueous solutions with varying sucrose concentrations. In addition, we demonstrated that tiny waterborne particles can be detected using a microdisk. These results indicate that the WGM in the hexagonal GaN microdisks potentially can be used to develop optical microbiosensors that can evaluate a limited area with a radius of 1-2 μm.

Two-dimensional photonic crystals for sensitive microscale chemical and biochemical sensing

Photonic crystals - optical devices able to respond to changes in the refractive index of a small volume of space - are an emerging class of label-free chemical- and bio-sensors. This review focuses on one class of photonic crystal, in which light is confined to a patterned planar material layer of sub-wavelength thickness. These devices are small (on the order of tens to hundreds of microns square), suitable for incorporation into lab-on-a-chip systems, and in theory can provide exceptional sensitivity. We introduce the defining characteristics and basic operation of two-dimensional photonic crystal sensors, describe variations of their basic design geometry, and summarize reported detection results from chemical and biological sensing experiments.

Low-voltage-tunable nanobeam lasers immersed in liquid crystals

A low-voltage-tunable one-dimensional nanobeam laser is realized by employing lithographically defined lateral electrodes. An InGaAsP nanobeam with a sub-micrometer width is transfer-printed in the middle of two electrodes using a polydimethylsiloxane stamp. Spectral tuning is achieved by controlling the molecular alignment of the surrounding liquid crystals (LCs). From μm-scale-gap structures, a total wavelength shift that exceed 6 nm is observed at a low voltage of less than 10 V. A measured spectral tuning rate of 0.87 nm/V, which is the largest value ever reported to our knowledge among LC-tuned photonic crystal lasers, was also noted.

Offset semi-parabolic nanoantenna made of a photonic crystal parabolic mirror and a plasmonic bow-tie antenna

In a parabolic mirror, light coming parallel to the antenna passes through its focal point. In this work, a waveguide feeds a semi-parabolic photonic crystal mirror and the emerging beam feeds a bow-tie antenna placed at the mirror's focal point-it is shown that the antenna system can not only feed a bow-tie antenna (producing a localized moderately high electric field) but also produces a directional radiation beam. The semi-parabolic mirror is also modified to reduce reflection back to the feeding waveguide.

Design low crosstalk ring-slot array structure for label-free multiplexed sensing

We theoretically demonstrate a low crosstalk ring-slot array structure used for label-free multiplexed sensing. The proposed sensors array is based on an array of three ring-slot and input/output line defect coupling waveguides. Each ring-slot cavity has slightly different cavity spacing and different resonant frequency. Results obtained using two dimensional finite-difference time-domain (2D-FDTD) simulation indicate that the resonant frequencies of each sensor unit in response to the refractive index variations are independent. The refractive index sensitivity is 134 ∼ 145.5 nm/RIU (refractive index unit) and the Q factors more than 10⁴ can be achieved. The calculated detect limit lower than 1.13 × 10⁻⁴ RIU is obtained. In addition, an extremely small crosstalk lower than −25.8 dB is achieved among the array of three ring-slot cavities. The results demonstrate that this multiplexed sensor array is a promising platform for integrated optical devices and enables highly parallel label-free detection.

Contra-directional coupling into slotted photonic crystals for spectrometric applications

We propose and demonstrate the concept of a contra-directional coupler between a W1 and a slotted photonic crystal waveguide. The bandwidth and operating wavelength of such a coupler can be controlled via its geometrical parameters, and power transfer is not periodic unlike in the more familiar codirectional case. Light of specific wavelengths can be extracted from the W1 mode into air slot modes using this design, with W1/slot coupling efficiencies of up to 99±1%, and waveguide extracted coupling efficiencies of up to 51±12% demonstrated experimentally. Combining several of these couplers in series, we demonstrate the spectral filtering functionality on-chip. The device therefore combines the well-known sensing function of the slotted waveguide geometry with the spectrometer function, thus uniting two essential biosensor functions in a monolithic device.

Overcoming Auger recombination in nanocrystal quantum dot laser using spontaneous emission enhancement

We propose a method to overcome Auger recombination in nanocrystal quantum dot lasers using cavity-enhanced spontaneous emission. We derive a numerical model for a laser composed of nanocrystal quantum dots coupled to optical nanocavities with small mode-volume. Using this model, we demonstrate that spontaneous emission enhancement of the biexciton transition lowers the lasing threshold by reducing the effect of Auger recombination. We analyze a photonic crystal nanobeam cavity laser as a realistic device structure that implements the proposed approach.

Capillarity-driven (self-powered) one-dimensional photonic crystals for refractometry and (bio)sensing applications

The synergistic use of capillarity and photonic crystals for both refractometry and biosensing applications is demonstrated, from both theoretical and experimental points of view.

Single-cell photonic nanocavity probes

In this report, we demonstrate for the first time photonic nanocavities operating inside single biological cells. Here we develop a nanobeam photonic crystal (PC) cavity as an advanced cellular nanoprobe, active in nature, and configurable to provide a multitude of actions for both intracellular sensing and control. Our semiconductor nanocavity probes emit photoluminescence (PL) from embedded quantum dots (QD) and sustain high quality resonant photonic modes inside cells. The probes are shown to be minimally cytotoxic to cells from viability studies, and the beams can be loaded in cells and tracked for days at a time, with cells undergoing regular division with the beams. We present in vitro label-free protein sensing with our probes to detect streptavidin as a path towards real-time biomarker and biomolecule detection inside single cells. The results of this work will enable new areas of research merging the strengths of photonic nanocavities with fundamental cell biology.

Carrier saturation in multiple quantum well metallo-dielectric semiconductor nanolaser: is bulk material a better choice for gain media?

Although multi quantum well (MQW) structure is frequently suggested as the appropriate medium for providing optical gain in nanolasers with low threshold current, we demonstrate that in general bulk gain medium can be a better choice. We show that the high threshold gain required for nanolasers demands high threshold carrier concentrations and therefore a highly degenerate condition in which the barriers between the quantum wells are heavily pumped. As a result, there occurs spontaneous emission from the barrier in very dissipative low Q modes or undesired confined higher Q modes with resonance wavelengths close to the barrier bandgap. This results in a competition between wells and barriers that suppresses lasing. A complete model involving the optical properties of the resonant cavity combined with the carrier injection in the multilayer structure is presented to support our argument. With this theoretical model we show that while lasing is achieved in the nanolaser with bulk gain media, the nanolaser with MQW gain structure exhibits well emission saturation due to the onset of barrier emission.

Photonic crystal nanofishbone nanocavity

We propose a photonic crystal (PhC) nanofishbone (NFB) nanocavity, which confines an ultrahigh Q (~1.8 × 10(7)) transverse-magnetic (TM) mode. With thin slab thickness and only few PhC periods, the TM mode in NFB nanocavity shows higher Q, larger confinement factor and smaller mode volume than that in PhC nanobeam nanocavity, while the total etched-surface area is also significantly reduced. This PhC NFB nanocavity with very compact device size will be very beneficial for quantum cascade lasers, plasmonic nanolasers, and other applications needing high Q TM modes.

Selective detection of sub-atto-molar Streptavidin in 10(13)-fold impure sample using photonic crystal nanolaser sensors

Biosensors selectively detecting a very small amount of biomarker protein in human blood are desired for early and reliable diagnoses of severe diseases. This paper reports the detection of protein (streptavidin: SA) in ultra-low concentration, with an ultra-high selectivity against contaminants, using photonic crystal nanolasers. For biotin-modified nanolasers in pure water with SA, an extremely-low detection limit of 16 zM is evaluated. Even in a mixture with 1 μM bovine serum albumin as the contaminant, 100 zM SA is detected, meaning a selectivity of 10(13). These are remarkable capabilities that are promising for practical biosensing in the medical applications mentioned above.

Permanent fixing or reversible trapping and release of DNA micropatterns on a gold nanostructure using continuous-wave or femtosecond-pulsed near-infrared laser light

The use of localized surface plasmons (LSPs) for highly sensitive biosensors has already been investigated, and they are currently being applied for the optical manipulation of small nanoparticles. The objective of this work was the optical trapping of λ-DNA on a metallic nanostructure with femtosecond-pulsed (fs) laser irradiation. Continuous-wave laser irradiation, which is generally used for plasmon excitation, not only increased the electromagnetic field intensity but also generated heat around the nanostructure, causing the DNA to become permanently fixed on the plasmonic substrate. Using fs laser irradiation, on the other hand, the reversible trapping and release of the DNA was achieved by switching the fs laser irradiation on and off. This trap-and-release behavior was clearly observed using a fluorescence microscope. This technique can also be used to manipulate other biomolecules such as nucleic acids, proteins, and polysaccharides and will prove to be a useful tool in the fabrication of biosensors.

Slotted photonic crystal sensors

Optical biosensors are increasingly being considered for lab-on-a-chip applications due to their benefits such as small size, biocompatibility, passive behaviour and lack of the need for fluorescent labels. The light guiding mechanisms used by many of them results in poor overlap of the optical field with the target molecules, reducing the maximum sensitivity achievable. This review article presents a new platform for optical biosensors, namely slotted photonic crystals, which provide higher sensitivities due to their ability to confine, spatially and temporally, the optical mode peak within the analyte itself. Loss measurements showed values comparable to standard photonic crystals, confirming their ability to be used in real devices. A novel resonant coupler was designed, simulated, and experimentally tested, and was found to perform better than other solutions within the literature. Combining with cavities, microfluidics and biological functionalization allowed proof-of-principle demonstrations of protein binding to be carried out. Higher sensitivities were observed in smaller structures than possible with most competing devices reported in the literature. This body of work presents slotted photonic crystals as a realistic platform for complete on-chip biosensing; addressing key design, performance and application issues, whilst also opening up exciting new ideas for future study.

Photonic crystal self-collimation sensor

A novel refractive index sensor based on the two dimensional photonic crystal folded Michelson interferometer employing the self-collimation effect is proposed and its performances are theoretically investigated. Two sensing areas are included in the sensor. Simulation results indicate the branch area is suitable for the small index variety range and fine detection, whereas the reflector area prone to the large index change range and coarse detection. Because of no defect waveguides and no crosstalk of signal, the sensor is desirable to perform monolithic integrated, low-cost, label-free real-time parallel sensing. In addition, a flexible design of self-collimation sensors array is demonstrated.

Optical trapping via guided resonance modes in a Slot-Suzuki-phase photonic crystal lattice

A novel photonic crystal lattice is proposed for trapping a two-dimensional array of particles. The lattice is created by introducing a rectangular slot in each unit cell of the Suzuki-Phase lattice to enhance the light confinement of guided resonance modes. Large quality factors on the order of 10⁵ are predicted in the lattice. A significant decrease of the optical power required for optical trapping can be achieved compared to our previous design.

Photonic crystal horizontally slotted nanobeam cavity for silicon-based nanolasers

We theoretically propose and investigate a TM-polarized one-dimensional photonic crystal nanocavity with a horizontal SiO2 slot on a suspended silicon nanobeam via the three-dimensional finite-element method. The ultrahigh quality factor and ultrasmall effective mode volume of 1.5×10(7) and 0.176 half-wavelength cubic of the horizontally SiO2-slotted nanocavity show strong possibilities for realizing an erbium-doped SiO2 nanolaser. This horizontal SiO2 slot structure can be precisely formed via the sputtering process and further transformed into an air slot via selective wet etching for optical index and biomolecule sensing.