Selective-mode optical nanofilters based on plasmonic complementary split-ring resonators

Localized surface plasmon resonance (LSPR) excitation on single silver nanoring with nanoscale surface roughness

With the expansion of the application of high-sensitivity Surface-enhanced Raman scattering (SERS) technique, micro SERS-active substrates with rich optical properties and high-level functions are desired. In this study, silver nanorings with nanoscale surface roughness were fabricated as a new type of enclosed quasi-2D micro-SERS-active substrate. Highly-crystalline spherical and hemispherical silver nanoprotrusions were densely and uniformly distributed over the entire surface of the nanorings. The SERS signals were significantly enhanced on the roughened silver nanorings which were mainly derived from the maximal localized surface plasmon resonance (LSPR) points at the junctions between adjacent coupled nanoprotrusions on the roughened nanorings. The mapping image shows a uniform and intense LSPR enhancement over the nanorings, owing to the uniform and dense distribution of silver nanoprotrusions and the resulting uniform distribution of maximal LSPR points on the roughened nanorings. The dark-field spectra further indicated that the single roughened silver nanoring had significant LSPR enhancement, a wide LSPR frequency-range response, and adaptability for SERS enhancement. Notably, both the measured and simulated results demonstrate that the maximal LSPR enhancement at the junctions between the nanoprotrusions, which are distributed on the inner surface of the silver nanoring, is higher than that on the outer surface because of the plasmon-focusing effect of the enclosed silver nanoring, which leads to the lateral asymmetrical distribution of LSPR intensity, indicating more LSPR and SERS features. These results indicate that single roughened silver nanorings exhibit excellent performance as a new type of enclosed quasi-2D silver nanoring micro-SERS-active substrate, microzone LSPR catalysis, and micro/nanodevices.

Densely Distributed Multiple Resonance Modes in a Fan-Shaped Plasmonic Nanostructure Demonstrated by FEM Simulations

Multiple resonance modes have important applications since they can provide multi-frequency operation for devices and bring great flexibility in practice. In this paper, based on a fan-shaped cavity coupled to a metal-isolator-metal (MIM) waveguide, a new kind of ultracompact plasmonic nanostructure is proposed to realize multiple resonance modes with dense distribution in a broad spectral range, and demonstrated through finite-element method (FEM) simulations. As many as ten resonance modes with an average interval of about 30 nm are obtained. They originate from the coexistence and interference of three types of basic modes in the fan-shaped cavity, i.e., the ring-waveguide modes, the modes in a ring array of periodic air grooves, and the metal-core-cavity modes. The dependence of resonance modes on structure parameters is investigated, which can provide an effective guide for choosing appropriate multiple-resonance-mode structures. Furthermore, by means of adjusting the geometrical asymmetry induced by the axial offset of the metal core in the fan-shaped cavity, the resonance modes can be effectively modulated, and some new modes appear because the wave path in the cavity is changed. The result proposes a novel way to create multiple resonance modes in plasmonic nanostructures, providing additional degrees of freedom for tailoring the resonance spectra and promising applications in various plasmonic devices, such as optical filters, ultrafast switches, biochemical sensors, and data storages.

Theoretical analysis and applications in inverse T-shape structure

An inverse T-shape structure, consisting of a bus waveguide coupled with two perpendicular rectangular cavities, has been investigated numerically and theoretically. The position of the transparency window can be manipulated by adjusting the lateral displacement between the two perpendicular cavities. The effects of changing different structural parameters on the transmission features are investigated in detail. The results indicate that the length of two cavities play important roles in optimizing optical response. Finally, two simple applications based on the inverse T-shape structure are briefly discussed. The findings demonstrate that the first- and second-order modes can be separated without interference, and the sensitivity of the inverse T-shape is as high as 1750 nm per refractive index unit (RIU); the corresponding figure of merit (FOM) reaches up to 77.1  RIU^-1, which is higher than in previous reports. The plasmonic configuration possesses the advantages of easy fabrication, compactness, and higher sensitivity as well as higher FOM, which will greatly benefit the compact plasmonic filter and high-sensitivity nanosensor in highly integrated optical devices.

Tunable high quality factor in two multimode plasmonic stubs waveguide

We numerically investigate the optical characteristics of a metal-dielectric-metal (MDM) waveguide side-coupled with two identical multimode stub resonators. Double plasmon-induced transparency (PIT) peaks with narrow full width at half maximum (FWHM) and high quality factor (Q-factor) can be observed in this structure. The Q-factors of PIT peaks in two stub resonators system are larger than those in single stub resonator system. A multimode coupled-radiation oscillator theory (MC-ROT), which is derived from ROT, is proposed to analyze the spectral response in the multimode system for the first time. The analytical results are confirmed by the finite-difference time-domain (FDTD) simulation results. We can also find that the Q-factors of the two PIT peaks have an opposite evolution tendency with the change of the stubs parameters and the maximum can reach to 427. These results may provide some applications for ultrasensitive sensors, switches and efficient filters.

Unidirectional reflectionless propagation in plasmonic waveguide-cavity systems at exceptional points

We design a non-parity-time-symmetric plasmonic waveguide-cavity system, consisting of two metal-dielectric-metal stub resonators side coupled to a metal-dielectric-metal waveguide, to form an exceptional point, and realize unidirectional reflectionless propagation at the optical communication wavelength. The contrast ratio between the forward and backward reflection almost reaches unity. We show that the presence of material loss in the metal is critical for the realization of the unidirectional reflectionlessness in this plasmonic system. We investigate the realized exceptional point, as well as the associated physical effects of level repulsion, crossing and phase transition. We also show that, by periodically cascading the unidirectional reflectionless plasmonic waveguide-cavity system, we can design a wavelength-scale unidirectional plasmonic waveguide perfect absorber. Our results could be potentially important for developing a new generation of highly compact unidirectional integrated nanoplasmonic devices.

Plasmonic coaxial waveguide-cavity devices

We theoretically investigate three-dimensional plasmonic waveguide-cavity structures, built by side-coupling stub resonators that consist of plasmonic coaxial waveguides of finite length, to a plasmonic coaxial waveguide. The resonators are terminated either in a short or an open circuit. We show that the properties of these waveguide-cavity systems can be accurately described using a single-mode scattering matrix theory. We also show that, with proper choice of their design parameters, three-dimensional plasmonic coaxial waveguide-cavity devices and two-dimensional metal-dielectric-metal devices can have nearly identical transmission spectra. Thus, three-dimensional plasmonic coaxial waveguides offer a platform for practical implementation of two-dimensional metal-dielectric-metal device designs.

Theoretical analysis and applications on nano-block loaded rectangular ring

We propose compact and switchable optical filters based on nano-block loaded rectangular rings, and investigate the selection property numerically and theoretically. A simple and convenient phase model is established for the theoretical analysis. The dependent factors, such as the number, size, and positions of the loaded blocks, are discussed in detail. It is found that a longer wavelength can be obtained without increasing the device dimension, and the selected wave is more sensitive to the length of the loaded blocks. The loading positions play key roles in the realization of separating the second-order modes. Finally, applications of this proposed structure are discussed simply. We find that the loaded filter device provides a more compact size than the unloaded one for the same properties, and a tunable plasmon induced transparency based switch effect is also achieved. These findings suggest potential applications in compact filters, tunable slow light devices, and sensor fields.

Analysis of subwavelength bandpass plasmonic filters based on single and coupled slot nanocavities

Subwavelength surface plasmon polariton optical filters based on metal-insulator-metal slot nanocavites are proposed and analyzed by using coupled mode theory and a finite element method. Simulation results reveal that a single slot cavity coupled with two access waveguides possesses a bandpass-filtering characteristic with its performance affected by its geometric parameters. To further improve the filtering performance, we explore coupled slot cavities as high-order plasmonic filters. When the slot cavities are side-coupled, the bandpass filtering spectrum is dependent on the positions of the access waveguides. The two slot cavities can also be set orthogonal, leading to strong mutual coupling. With careful tuning of the relative length between the two cavities, improved filtering spectrum can be obtained. Given the subwavelength footprint of the proposed plasmonic filters, they can be used in an ultradense plasmonic integrated circuit for optical signal processing.

Highly tunable nanoscale metal-insulator-metal split ring core ring resonators (SRCRRs)

A class of nano-scale wavelength-selective optical filters is proposed where the core of a metal-insulator-metal square ring is replaced with a split-ring core (SRC). The proposed resonator supports split-ring-resonator-like (SRR-like) resonant modes that are characteristics of the structure. These resonant modes are highly adjustable, via the gap size of the split-ring core, over a range of hundreds of nanometers. The proposed resonator can also incorporate tunable materials localized in the gap of the SRC or placed throughout the resonating path. By varying the refractive index (1 to 2) of the material in the gap of the SRC, first and second SRR-like modes can be tuned over ~200 and 300 nm, respectively. A circuit model based on transmission-line theory is proposed for the structure and used to derive the resonance conditions of the split-ring-resonator-like modes; the model compares favorably to the numerical results. The proposed resonator has the potential to be utilized effectively in integrated nano-scale optical switches and tunable filters.