The aspect ratio effect on plasmonic properties and biosensing of bonding mode in gold elliptical nanoring arrays

Shape-altering flexible plasmonics of in-situ deformable nanorings

Nanorings (NRs) with their intrinsic cavities have attracted interest as plasmonic nanoparticles for years, due to the uniform electric field enhancement inside the cavity, lower plasmon damping effects and comparatively high refractive index sensitivities. In the present work, we successfully fabricated a series of Au NR arrays on flexible polydimethylsiloxane substrates by taking advantage of state-of-the-art fabrication methods such as electron beam lithography and wet-etching transfer techniques. In-situ optical measurements on these flexible systems are enabled by implementing a homemade micro-stretcher inside an optical reflection spectroscopy setup. The corresponding dark-field spectra of thin-walled NR arrays exhibit a strong shift to longer wavelengths (i.e., ~ 2.85 nm per 1% strain) under polarization perpendicular to the traction, mainly resulting from the increasing shape deformation of the NRs under strain. Moreover, numerical simulations illustrate that the shifting plasmonic mode has a radially-symmetric charge distribution of the bonding mode and is rather sensitive to the tuning of the NRs' shape as confirmed by a subsequent in-situ scanning electron microscope characterization. These results explore the possibilities of shape-altering flexible plasmonics for nanoparticles with a cavity and indicate potential applications for plasmonic colors and biochemical sensing in future work.

High-throughput fabrication of high aspect ratio Ag/Al nanopillars for optical detection of biomarkers

Nanomaterial-based optical techniques for biomarker detection have garnered tremendous attention from the nanofabrication community due to their high precision and enhanced limit of detection (LoD) features. These nanomaterials are highly responsive to local refractive index (RI) fluctuations, and their RI unit sensitivity can be tuned by varying the chemical composition, geometry, and dimensions of the utilized nanostructures. To improve the sensitivity and LoD values of these nanomaterials, it is common to increase both dimensions and aspect ratios of the fabricated nanostructures. However, limited by the complexity, prolonged duration, and elevated costs of the available nanofabrication techniques, mass production of these nanostructures remains challenging. To address not only high accuracy, but also speed and production effectiveness in these nanostructures' fabrication, our work reports, for the first time, a fast, high-throughput, and cost-effective nanofabrication protocol for routine manufacturing of polymer-based nanostructures with high sensitivity and calculated LoD in the pM range by utilizing anodized aluminum oxide (AAO) membranes as templates. Specifically, our developed platform consists of arrays of nearly uniform polystyrene nanopillars with an average diameter of ∼185 nm and aspect ratio of ∼11. We demonstrate that these nanostructures can be produced at a high speed and a notably low price, and that they can be efficiently applied for biosensing purposes after being coated with aluminum-doped silver (Ag/Al) thin films. Our platform successfully detected very low concentrations of human C-reactive protein (hCRP) and SARS-CoV-2 spike protein biomarkers in human plasma samples with LoDs of 11 and 5 pM, respectively. These results open new opportunities for day-to-day fabrication of high aspect ratio arrays of nanopillars that can be used as a base for nanoplasmonic sensors with competitive LoD values. This, in turn, contributes to the development of point-of-care devices and further improvement of the existing nanofabrication techniques, thereby enriching the fields of pharmacology, clinical analysis, and diagnostics.

Nanoring structure, spacing, and local dielectric sensitivity for plasmonic resonances in Fano resonant square lattices

Lattices of plasmonic nanorings with particular geometries exhibit singular, tunable resonance features in the infrared. This work examined effects of nanoring inner radius, wall thickness, and lattice constant on the spectral response of single nanorings and in Fano resonant square lattices, combining use of the discrete and coupled dipole approximations. Increasing nanoring inner radius red-shifted and broadened the localized surface plasmon resonance (LSPR), while wall thickness modulated the LSPR wavelength and decreased absorption relative to scattering. The square lattice constant was tuned to observe diffractively-coupled lattice resonances, which increased resonant extinction 4.3-fold over the single-ring LSPR through Fano resonance. Refractive index sensitivities of 760 and 1075 nm RIU(-1) were computed for the plasmon and lattice resonances of an optimized nanoring lattice. Sensitivity of an optimal nanoring lattice to a local change in dielectric, useful for sensing applications, was 4 to 5 times higher than for isolated nanorings or non-coupling arrays. This was attributable to the Fano line-shape in far-field diffractive coupling with near-field LSPR.

Nanoplasmonic surfaces enabling strong surface-normal electric field enhancement

Conventional two-dimensional (2D) plasmonic arrays provide electric field intensity enhancement in the plane, typically with a surface coverage around 50% in the plan-view. Here, we show nanoplasmonic three-dimensional (3D) surfaces with 100% surface coverage enabling strong surface-normal field enhancement. Experimental measurements are found to agree well with the full electromagnetic solution. Along with the surface-normal localization when using the plasmonic 3D-surface, observed maximum field enhancement is 7.2-fold stronger in the 3D-surface than that of the 2D counterpart structure. 3D-plasmonic nonplanar surfaces provide the ability to generate volumetric field enhancement, possibly useful for enhanced plasmonic coupling and interactions.