Localized enhancement of electric field in tip-enhanced Raman spectroscopy using radially and linearly polarized light

High spatial resolution ambient tip-enhanced (multipolar) Raman scattering

This article summarizes lessons learnt from ambient tip-enhanced Raman (TER) mapping of molecules interacting with plasmonic nanostructures. It is shown that numerous physical and chemical phenomena contribute to high-resolution TER spectral images. As a result, selectively tracking interfacial chemical transformations via TERS is more challenging than currently appreciated.

Tip-Enhanced Raman Spectroscopy Based on Spiral Plasmonic Lens Excitation

In this study, we proposed the idea of replacing the traditional objective lens in bottom-illumination mode with a plasmonic lens (PL) to achieve tip-enhanced Raman spectroscopy (TERS). The electric field energy of surface plasmon polaritons (SPPs) of the spiral PL was found to be more concentrated at the focal point without any sidelobe using the finite-difference time domain (FDTD) method compared with that of a symmetry-breaking PL. This property reduces far-field background noise and increases the excitation efficiency of the near-field Raman signal. The disadvantage of only the near-field Raman scattering of samples at the center of the structure being detected when using an ordinary PL in TERS is overcome by using our proposed method of changing only the polarization of the incident light.

Conformational heterogeneity of molecules physisorbed on a gold surface at room temperature

A quantitative single-molecule tip-enhanced Raman spectroscopy (TERS) study at room temperature remained a challenge due to the rapid structural dynamics of molecules exposed to air. Here, we demonstrate the hyperspectral TERS imaging of single or a few brilliant cresyl blue (BCB) molecules at room temperature, along with quantitative spectral analyses. Robust chemical imaging is enabled by the freeze-frame approach using a thin Al₂O₃ capping layer, which suppresses spectral diffusions and inhibits chemical reactions and contamination in air. For the molecules resolved spatially in the TERS image, a clear Raman peak variation up to 7.5 cm⁻¹ is observed, which cannot be found in molecular ensembles. From density functional theory-based quantitative analyses of the varied TERS peaks, we reveal the conformational heterogeneity at the single-molecule level. This work provides a facile way to investigate the single-molecule properties in interacting media, expanding the scope of single-molecule vibrational spectroscopy studies.

Tip-enhanced vibrational spectroscopy at room temperature is complicated by molecular conformational dynamics, photobleaching, contaminations, and chemical reactions in air. This study demonstrates that a sub-nm protective layer of Al₂O₃ provides robust conditions for probing single-molecule conformations.

Theoretical Study on the Ultrafast Selective Excitation of Surface-Enhanced Coherent Anti-Stokes Raman Scattering Based on Fano Resonance of Disk-Ring Nanostructures by Shaped Femtosecond Laser Pulses

The enhancement and selective excitation of coherent anti-Stokes Raman scattering (CARS) and the suppression of background noise are very important problems for real-time detection at the single-molecule level. Optimizing the plasmonic substrate to ensure that all the hot spots of the pump, probe, Stokes, and anti-Stokes light are at the same position is the key to increasing the CARS signal to reach the level of single-molecule detection. The selective excitation of the target CARS peak and the suppression of the other peaks are the key to improving the signal-to-noise ratio. In this paper, we present a theoretical study to control the selective excitation and enhancement of any one of the three CARS peaks using the Fano resonance of a disk-ring structure. By optimizing the modulation of the pump, Stokes, and probe pulse, one CARS peak is maximized, while the other two are suppressed to zero. Fano resonance is applied to simultaneously enhance the four surface plasmon modes of the pump, probe, Stokes, and anti-Stokes light and to ensure that all the hot spots are located at the same position by adjusting the size of the disk-ring structure. The hot spots of the four pulses are concentrated in the disk-ring gap with a deviation distance of less than 2 nm, and the intensity of the CARS is enhanced by 1.43 × 1012 times, which is much higher than the requirement of single-molecule detection. The time, frequency, and phase distribution of the input and the response of the four pulses are studied in detail. It was found that the selective excitation and the spectra of CARS are both well preserved.

Advanced plasmonic technologies for multi-scale biomedical imaging

Plasmonic technologies are available for multi-scale biomedical imaging ranging from micrometre to angstrom level.

Advanced mechanism of multiphysics fields tip enhancement induced with varied laser power to fabricate pattern-transformable subdiffraction limit nanostructures

The nanofabrication platform was carried out using an atomic force microscope (AFM) system and a continuous wave (cw) laser to investigate the influence of laser power on the underlying mechanism of nanostructures fabricated by multiphysics fields tip enhancement (MFTE) induced by a cw laser irradiating the AFM probe tip. The nanostructure fabrication of nanopits and grooves and nanodots and lines on a polymethyl methacrylate thin film was conducted in an ambient environment by changing the incident laser power. The dependence of the MFTE on laser power was numerically analyzed, too. The lateral dimensions of nanopits and grooves and nanodots and lines characterized in situ were 154 nm, 96 nm, 188 nm, and 25 nm, respectively, breaking the optical diffraction limit. It turned out that the nanostructures converted from craters (pits and grooves) to protrusions (dots and lines) when altered with the laser power. Different laser powers can trigger the MFTE to change, thus, inducing varied coupling energy, which is the essential mechanism for nanostructure conversion. We also established a model to analyze the nanostructures transition and to predict the dimensions of nanostructures. The simulation results demonstrate that the MFTE has an essential effect on the formation of nanostructures, which are in good agreement with the experimental results.

Ultrafast Photon-Induced Tunneling Microscopy

Unification of the techniques of ultrafast science and scanning tunneling microscopy (STM) has the potential of tracking electronic motion in molecules simultaneously in real space and real time. Laser pulses can couple to an STM junction either in the weak-field or in the strong-field interaction regime. The strong-field regime entails significant modification (dressing) of the tunneling barrier of the STM junction, whereas the weak-field or the photon-driven regime entails perturbative interaction. Here, we describe how photons carried in an ultrashort pulse interact with an STM junction, defining the basic fundamental framework of ultrafast photon-induced tunneling microscopy. Selective dipole coupling of electronic states by photons is shown to be controllable by adjusting the DC bias at the STM junction. An ultrafast tunneling microscopy involving photons is established. Consolidation of the technique calls for innovative approaches to detect photon-induced tunneling currents at the STM junction. We introduce and characterize here three techniques involving dispersion, polarization, and frequency modulation of the laser pulses to lock-in detect the laser-induced tunneling current. We show that photon-induced tunneling currents can simultaneously achieve angstrom scale spatial resolution and sub-femtosecond temporal resolution. Ultrafast photon-induced tunneling microscopy will be able to directly probe electron dynamics in complex molecular systems, without the need of reconstruction techniques.

Facilitating Hotspot Alignment in Tip-Enhanced Raman Spectroscopy via the Silver Photoluminescence of the Probe

A tip-enhanced Raman spectroscopy (TERS) system based on an atomic force microscope (AFM) and radially polarized laser beam was developed. A TERS probe with plasmon resonance wavelength matching the excitation wavelength was prepared with the help of dark-field micrographs. The intrinsic photoluminescence (PL) from the silver (Ag)-coated TERS probe induced by localized surface plasmon resonance contains information about the near-field enhanced electromagnetic field intensity of the probe. Therefore, we used the intensity change of Ag PL to evaluate the stability of the Ag-coated probe during TERS experiments. Tracking the Ag PL of the TERS probe was helpful to detect probe damage and hotspot alignment. Our setup was successfully used for the TERS imaging of single-walled carbon nanotubes, which demonstrated that the Ag PL of the TERS probe is a good criterion to assist in the hotspot alignment procedure required for TERS experiments. This method lowers the risk of contamination and damage of the precious TERS probe, making it worthwhile for wide adoption in TERS experiments.

One-side metal-coated pyramidal cantilever tips for highly reproducible tip-enhanced Raman spectroscopy

Tip-enhanced Raman spectroscopy (TERS) has been recognized as a useful tool for nanoscale chemical analysis, and it can further reach down to the sub-nanometer scale in the gap-mode configuration. Using an atomic force microscopy (AFM) in gap-mode TERS for position control of a metallic tip, a unique and correlative analysis can be even realized at the single molecule level. However, one of crucial issues in AFM-based gap-mode TERS is the fabrication of reliable and reproducible cantilver metallic tips. Here, we propose a simple, cost-effective fabrication method of metal-coated tips for AFM-based gap-mode TERS by means of the physical vapor deposition technique in a reproducible way. Our plamonic tips have extremely smooth silver layers on one side of the pyramidal tip, which is totally different from the regular metallic tips that hold granular metallic structures randomly arranged on their bodies. Importantly, all fabricated tips exhibited a reasonably high enhancement factor of more than 10⁴, which indicates that the reproducibility of our plasmonic tip is virtually 100% in the gap-mode configuration. The excellent reproducibility of gap-mode TERS measurement holds great promise for rendering AFM-based TERS as a powerful analytical technique in a broad range of fields.

On the giant enhancement of light in plasmonic or all-dielectric gratings containing nano-voids

We report the possibility of generating tremendous light-field enhancements within shallow nano-trenches made in a high-index dielectric material because of resonant behaviors that are reminiscent of what we get with sub-wavelength plasmonic cavities. High quality factors are explained through a modal analysis which gives explicit design rules. The thin dielectric void gratings could be a relevant alternative to plasmon-based devices for chemical sensing, or could inspire novel efficient wavelength-selective photo-absorbers by taking poorly absorbing materials.

Tip-Enhanced Raman Spectroscopy with High-Order Fiber Vector Beam Excitation

We investigated tip-enhanced Raman spectra excited by high-order fiber vector beams. Theoretical analysis shows that the high-order fiber vector beams have stronger longitudinal electric field components than linearly polarized light under tight focusing conditions. By introducing the high-order fiber vector beams and the linearly polarized beam from a fiber vector beam generator based on an electrically-controlled acoustically-induced fiber grating into a top-illumination tip-enhanced Raman spectroscopy (TERS) setup, the tip-enhanced Raman signal produced by the high-order fiber vector beams was 1.6 times as strong as that produced by the linearly polarized light. This result suggests a new type of efficient excitation light beams for TERS.

Quantitative comparison of plasmon resonances and field enhancements of near-field optical antennae using FDTD simulations

Plasmon resonances and electric field enhancements of several near-field optical antennae with plasmonic nanostructures engineered at their apices were quantitatively compared using finite difference time domain simulations. Although many probe designs have been tested experimentally, a systematic comparison of field enhancements has not been possible, due to differences in instrument configuration, reporter mechanism, excitation energy, and plasmonic materials used. For plasmonic nanostructures attached to a non-plasmonic support (e.g., a nanoparticle functionalized AFM tip), we find that the complex refractive index of the support material is critical in controlling the overall plasmonic behavior of the antenna. Supports with strong absorption at optical energies (Pt, W) dampen plasmon resonances and lead to lower enhancements, while those with low absorption (SiO₂, Si₃N₄, Si) boost enhancement by increasing the extinction cross-section of the apex nanostructure. Using a set of physically realistic constraints, probes were optimized for peak plasmonic enhancement at common near-field optical wavelengths (633-647 nm) and those with focused ion-beam milled grooves near the apex were found to give the largest local field enhancements (~30x). Compared to unstructured metal cones, grooved probes gave a 300% improvement in field strength, which can boost tip-enhanced Raman spectroscopy (TERS) signals by 1-2 orders of magnitude. Moreover, grooved probe resonances can be easily tuned over visible and near-infrared energies by varying the plasmonic metal (Ag or Au) and groove location. Overall, this work shows that probes with strong localized surface plasmon resonances at their apices can be engineered to provide large field enhancements and boost signals in near-field optical experiments.

Plasmon-Mediated Drilling in Thin Metallic Nanostructures

Thin and ultraflat conductive surfaces are of particular interest to use as substrates for tip-enhanced spectroscopy applications. Tip-enhanced spectroscopy exploits the excitation of a localized surface plasmon resonance mode at the apex of a metallized atomic force microscope tip, confining and enhancing the local electromagnetic field by several orders of magnitude. This allows for nanoscale mapping of the surface with high spatial resolution and surface sensitivity, as demonstrated when coupled to local Raman measurements. In gap-mode tip-enhanced spectroscopy, the specimen of interest is deposited onto a flat metallic surface and probed by a metallic tip, allowing for further electromagnetic confinement and subsequent enhancement. We investigate here a geometry where a gold tip is used in conjunction with a silver nanoplate, thus forming a heterometallic platform for local enhancement. When irradiated, a plasmon-mediated reaction is triggered at the tip-substrate junction due to the enhanced electric field and the transfer of hot electrons from the tip to the nanoplate. This resulting nanoscale reaction appears to be sufficient to ablate the thin silver plates even under weak laser intensity. Such an approach may be further exploited for patterning metallic nanostructures or photoinduced chemical reactions at metal surfaces.

Nanoscale Optical Microscopy and Spectroscopy Using Near-Field Probes

Light-matter interactions can provide a wealth of detailed information about the structural, electronic, optical, and chemical properties of materials through various excitation and scattering processes that occur over different length, energy, and timescales. Unfortunately, the wavelike nature of light limits the achievable spatial resolution for interrogation and imaging of materials to roughly λ/2 because of diffraction. Scanning near-field optical microscopy (SNOM) breaks this diffraction limit by coupling light to nanostructures that are specifically designed to manipulate, enhance, and/or extract optical signals from very small regions of space. Progress in the SNOM field over the past 30 years has led to the development of many methods to optically characterize materials at lateral spatial resolutions well below 100 nm. We review these exciting developments and demonstrate how SNOM is truly extending optical imaging and spectroscopy to the nanoscale.

Tip-enhanced Raman spectroscopy - from early developments to recent advances

An analytical technique operating at the nanoscale must be flexible regarding variable experimental conditions while ideally also being highly specific, extremely sensitive, and spatially confined. In this respect, tip-enhanced Raman scattering (TERS) has been demonstrated to be ideally suited to, e.g., elucidating chemical reaction mechanisms, determining the distribution of components and identifying and localizing specific molecular structures at the nanometre scale. TERS combines the specificity of Raman spectroscopy with the high spatial resolution of scanning probe microscopies by utilizing plasmonic nanostructures to confine the incident electromagnetic field and increase it by many orders of magnitude. Consequently, molecular structure information in the optical near field that is inaccessible to other optical microscopy methods can be obtained. In this general review, the development of this still-young technique, from early experiments to recent achievements concerning inorganic, organic, and biological materials, is addressed. Accordingly, the technical developments necessary for stable and reliable AFM- and STM-based TERS experiments, together with the specific properties of the instruments under different conditions, are reviewed. The review also highlights selected experiments illustrating the capabilities of this emerging technique, the number of users of which has steadily increased since its inception in 2000. Finally, an assessment of the frontiers and new concepts of TERS, which aim towards rendering it a general and widely applicable technique that combines the highest possible lateral resolution and extreme sensitivity, is provided.

Photothermal Microscopy of Coupled Nanostructures and the Impact of Nanoscale Heating in Surface Enhanced Raman Spectroscopy

The optical properties of plasmonic nanoparticles are strongly dependent on interactions with other nanoparticles, which complicates analysis for systems larger than a few particles. In this work we examined heat dissipation in aggregated nanoparticles, and its influence on surface enhanced Raman scattering (SERS), through correlated photothermal heterodyne imaging, electron microscopy and SERS measurements. For dimers the per particle absorption cross-sections show evidence of interparticle coupling, however, the effects are much smaller than those for the field enhancements that are important for SERS. For larger aggregates the total absorption was observed to be simply proportional to aggregate volume. This observation allows us to model light absorption and heating in the aggregates by assuming that the particles act as independent heat sources. The heat dissipation calculations show that very high temperatures can be created at the nanoparticle surface, and that the temperature decreases with increasing thermal conductivity of the surroundings. This is in agreement with the SERS measurements that show faster signal degradation for air compared to water environments.

Electromagnetic theories of surface-enhanced Raman spectroscopy

A fundamental theoretical understanding of SERS, and SERS hotspots, leads to new design principles for SERS substrates and new applications in nanomaterials and chemical analysis.

Single-Molecule Chemistry with Surface- and Tip-Enhanced Raman Spectroscopy

Single-molecule (SM) surface-enhanced Raman spectroscopy (SERS) and tip-enhanced Raman spectroscopy (TERS) have emerged as analytical techniques for characterizing molecular systems in nanoscale environments. SERS and TERS use plasmonically enhanced Raman scattering to characterize the chemical information on single molecules. Additionally, TERS can image single molecules with subnanometer spatial resolution. In this review, we cover the development and history of SERS and TERS, including the concept of SERS hot spots and the plasmonic nanostructures necessary for SM detection, the past and current methodologies for verifying SMSERS, and investigations into understanding the signal heterogeneities observed with SMSERS. Moving on to TERS, we cover tip fabrication and the physical origins of the subnanometer spatial resolution. Then, we highlight recent advances of SMSERS and TERS in fields such as electrochemistry, catalysis, and SM electronics, which all benefit from the vibrational characterization of single molecules. SMSERS and TERS provide new insights on molecular behavior that would otherwise be obscured in an ensemble-averaged measurement.

Nanometal Skin of Plasmonic Heterostructures for Highly Efficient Near-Field Scattering Probes

In this work, atomic force microscopy probes are functionalized by virtue of self-assembling monolayers of block copolymer (BCP) micelles loaded either with clusters of silver nanoparticles or bimetallic heterostructures consisting of mixed species of silver and gold nanoparticles. The resulting self-organized patterns allow coating the tips with a sort of nanometal skin made of geometrically confined nanoislands. This approach favors the reproducible engineering and tuning of the plasmonic properties of the resulting structured tip by varying the nanometal loading of the micelles. The newly conceived tips are applied for experiments of tip-enhanced Raman scattering (TERS) spectroscopy and scattering-type scanning near-field optical microscopy (s-SNOM). TERS and s-SNOM probe characterizations on several standard Raman analytes and patterned nanostructures demonstrate excellent enhancement factor with the possibility of fast scanning and spatial resolution <12 nm. In fact, each metal nanoisland consists of a multiscale heterostructure that favors large scattering and near-field amplification. Then, we verify the tips to allow challenging nongap-TER spectroscopy on thick biosamples. Our approach introduces a synergistic chemical functionalization of the tips for versatile inclusion and delivery of plasmonic nanoparticles at the tip apex, which may promote the tuning of the plasmonic properties, a large enhancement, and the possibility of adding new degrees of freedom for tip functionalization.

Tip-enhanced Raman spectroscopy: tip-related issues

After over 15 years of development, tip-enhanced Raman spectroscopy (TERS) is now facing a very important stage in its history. TERS offers high detection sensitivity down to single molecules and a high spatial resolution down to sub-nanometers, which make it an unprecedented nanoscale analytical technique offering molecular fingerprint information. The tip is the core element in TERS, as it is the only source through which to support the enhancement effect and provide the high spatial resolution. However, TERS suffers and will continue to suffer from the limited availability of TERS tips with a high enhancement, good stability, and high reproducibility. This review focuses on the tip-related issues in TERS. We first discuss the parameters that influence the enhancement and spatial resolution of TERS and the possibility to optimize the performance of a TERS system via an in-depth understanding of the enhancement mechanism. We then analyze the methods that have been developed for producing TERS tips, including vacuum-based deposition, electrochemical etching, electrodeposition, electroless deposition, and microfabrication, with discussion on the advantages and weaknesses of some important methods. We also tackle the issue of lifetime and protection protocols of TERS tips which are very important for the stability of a tip. Last, some fundamental problems and challenges are proposed, which should be addressed before this promising nanoscale characterization tool can exert its full potential. Graphical Abstract ᅟ.

Tip-enhanced Raman scattering--Targeting structure-specific surface characterization for biomedical samples

Tip-enhanced Raman scattering (TERS) has become a powerful tool for nanoscale structural analysis for several branches of organic, inorganic, and biological chemistry. This highly sensitive technique enables molecular characterization with a lateral resolution far beyond Abbe's diffraction limit and correlates structural and topographic information on a nanometer scale. In this review, the current experimental concepts with respect to their strengths and obstacles are introduced and discussed. A further focus was set to biochemistry comprising applications like nucleic acids, proteins, and microorganisms, thus demonstrating the potential use towards the pharmaceutically relevant challenges where nanometer resolution is required.

Gold-coated AFM tips for tip-enhanced Raman spectroscopy: theoretical calculation and experimental demonstration

The optimal gold-coated atomic force microscopy (AFM) tip-substrate system for tip-enhanced Raman spectroscopy (TERS) was designed theoretically and demonstrated experimentally. By optimizing the tip, excitation laser, and the substrate, the TERS enhancement factor can be tuned to as high as 9 orders of magnitude, and the spatial resolution could be down to 5 nm. Preliminary experimental results for AFM tips coated with gold layer of different thicknesses reveal that the maximum enhancement can be achieved when the thickness is about 60-80 nm, which is in good agreement with the theoretical prediction. Our results not only provide a deep understanding of the underlying physical mechanism of AFM tip-based TERS, but also guide the rational construction of a working AFM-TERS system with a high efficiency.

High-resolution Raman imaging of bundles of single-walled carbon nanotubes by tip-enhanced Raman spectroscopy

Bundles of single-walled carbon nanotubes (SWCNTs) prepared by plasma torch method and further purified, are deposited over a glass coverslip to estimate the spatial resolution of tip-enhanced Raman spectroscopy measurements. For this purpose, near-field Raman maps and spectra of isolated bundles of carbon nanotubes are collected using optimized experimental conditions such as a tightly focused beam using a 1.4 numerical aperture oil immersion microscope objective and a gold coated atomic force microscope probe illuminated by a radially polarized 632.8 nm wavelength to selectively excite the localized surface plasmon confined at the extremity of the tip. The near-field nature of the collected Raman signals is evaluated through measuring the decay of the Raman signal with respect to the tip-sample separation.

A near field optical image of a gold surface: a luminescence study

We have used the luminescence from a gold tip to study the optical near field properties of a gold surface.

Tip-enhanced Raman spectroscopy of graphene-like and graphitic platelets on ultraflat gold nanoplates

TERS was used to investigate the graphene-like platelets in gap mode geometry using radially and linearly polarized excitation.