Spatial resolution and noise in organic light-emitting diode displays for medical imaging applications

Aerial floating 3D display device with lenticular-type naked-eye 3D display and a crossed-mirror array

The depth feeling of a naked-eye 3D display is determined by the combination of the display and the lenticular lens, and because the parallax of the displayed image cannot be made stronger, providing a more stereoscopic effect is difficult. In this study, we propose a system that provides a clearer stereoscopic effect by enabling the naked-eye 3D display to be observed as an aerial stereoscopic image without the framework of the display. By comparing it with the conventional aerial display method, we demonstrate that it is possible to maintain the same level of resolution as the method without a crossed-mirror array and that natural stereoscopic view is possible.

Detectability of the diagonal direction in the assessment of medical images using a high-brightness liquid crystal display monitor

Liquid crystal display (LCD) monitors show a homogenous quadratic pattern in the number of pixels, size, and dimensions. However, their modulation transfer function (MTF) has a non-isotropic effect in the vertical, horizontal, and diagonal directions on the screen from the shape and pattern of arrangement of pixels. Moreover, the MTF of the human eye differs in spatial frequency response directivity among individuals. In this study, the high-brightness LCD monitor detectability was physically simulated and visually examined throughout the system, including the imaging system. Furthermore, the influence of anisotropy of the LCD monitor was evaluated. The MTF of the LCD monitor was measured by acquiring a bar pattern using a digital camera with sufficiently small pixels in the vertical, horizontal, and diagonal directions and by performing interpolation processing through waveform reproduction and frequency analysis. The detectability of the LCD monitor was verified throughout the system, including the imaging system. Radiographs of the rectangular wave chart (0.5-10 LP/mm) were obtained in the vertical, horizontal, and diagonal (45°) directions to assess the perceivable limit of the human eye (LP/mm). The spatial resolution of the LCD monitor in the diagonal direction was higher than that in the vertical or horizontal direction, which was in good agreement with the results of the profile analysis and visual evaluation.

Effect of color visualization and display hardware on the visual assessment of pseudocolor medical images

PURPOSE

Even though the use of color in the interpretation of medical images has increased significantly in recent years, the ad hoc manner in which color is handled and the lack of standard approaches have been associated with suboptimal and inconsistent diagnostic decisions with a negative impact on patient treatment and prognosis. The purpose of this study is to determine if the choice of color scale and display device hardware affects the visual assessment of patterns that have the characteristics of functional medical images.

METHODS

Perfusion magnetic resonance imaging (MRI) was the basis for designing and performing experiments. Synthetic images resembling brain dynamic-contrast enhanced MRI consisting of scaled mixtures of white, lumpy, and clustered backgrounds were used to assess the performance of a rainbow ("jet"), a heated black-body ("hot"), and a gray ("gray") color scale with display devices of different quality on the detection of small changes in color intensity. The authors used a two-alternative, forced-choice design where readers were presented with 600 pairs of images. Each pair consisted of two images of the same pattern flipped along the vertical axis with a small difference in intensity. Readers were asked to select the image with the highest intensity. Three differences in intensity were tested on four display devices: a medical-grade three-million-pixel display, a consumer-grade monitor, a tablet device, and a phone.

RESULTS

The estimates of percent correct show that jet outperformed hot and gray in the high and low range of the color scales for all devices with a maximum difference in performance of 18% (confidence intervals: 6%, 30%). Performance with hot was different for high and low intensity, comparable to jet for the high range, and worse than gray for lower intensity values. Similar performance was seen between devices using jet and hot, while gray performance was better for handheld devices. Time of performance was shorter with jet.

CONCLUSIONS

Our findings demonstrate that the choice of color scale and display hardware affects the visual comparative analysis of pseudocolor images. Follow-up studies in clinical settings are being considered to confirm the results with patient images.