Nonlinear absorption of SWNT film and its effects to the operation state of pulsed fiber laser

Transparent nanopaper for ultrashort pulse generation in the near-infrared region

Transparent nanopaper (T-paper) can be applied in the field of electromagnetic shielding materials, antistatic materials, composite conductive materials, electric pool materials, super capacitors, and thermal management systems. However, this kind of T-paper has not been employed in ultrafast photonics yet. For the first time, to our knowledge, transparent electrical nanopaper is used in fiber lasers, different from the conventional pulsed fiber laser, which operates in the Q-switched regime under low pump power and then in the mode-locked regime under high pump power. Mode-locking is achieved first with a pulse duration of 550 fs under low pump power (166 mW). When further increasing the pump power up to 198 mW, the proposed fiber laser can be converted from a mode-locked to Q-switched state, which is a result of the two-photon absorption effect. The proposed fiber laser based on T-paper can be potentially applied in optical tomography, metrology, spectroscopy, micro-machining technology, and biomedical diagnostics.

Improving the formation probability and stability of noise-like pulse by weakening the spectrum filtering effect

Noise-like pulses (NLP) are extremely sought after in low-coherence tomography and supercontinuum, etc. Here, we propose an effective method to form the NLP in the all-normal-dispersion (ANDi) fiber laser by weakening the spectrum filtering for the first time. Numerical explorations are performed in detail and demonstrate that the NLP can be originated from the clustering behavior of amplified random sub-pulses led by the saturable absorber. By simulating the pulse-pattern distribution in the two-dimensional parameter space, it is further found that this kind of NLP pattern is widely distributed where are with a weak spectrum filtering. Since, the weaker the filtering, the harder the dissipative system to achieve balance, which helps to avoid the evolution from the pulse cluster to other coherent states and supports the NLP stability. To prove the feasibility experimentally, we built an ANDi fiber laser based on the nonlinear polarization rotating (NPR). The built laser can operate at the stable dissipative soliton (DS) state with a spectrum filter, which also with a 45 nm wavelength tuning performance. Replacing the filter, only NLP with a 40.2 ps pedestal and 237 fs spike can be attained. The experiments agree well with the numerical predictions. This exploration significantly broadens the design possibilities for ultrafast lasers, making them much more accessible to produce desired pulse patterns.

Photonic device combined optical microfiber coupler with saturable-absorption materials and its application in mode-locked fiber laser

We demonstrated a mode-locked fiber laser based on a novel photonic device that combined optical microfiber coupler (OMC) and saturable absorption materials. The stable ultrafast laser was formed based on the interaction between the deposited Indium Antimonide (InSb) and the evanescent field on OMC. Different from optical microfiber (OM), OMC can directly output the mode-locked laser without additional beam splitting devices, which further improves the integrated characteristics of the fiber laser. The pulse duration of the output pulse is 405 fs at the central wavelength of 1560 nm. To the best of our knowledge, this is the first time that optical microfiber coupler based saturable absorber (OMC-SA) for mode-locked fiber laser is demonstrated.

Few-Layer Bismuthene for Coexistence of Harmonic and Dual Wavelength in a Mode-Locked Fiber Laser

Bismuthene, as a novel two-dimensional (2D) material, has attracted extensive attention because of its outstanding properties including narrow band gap, stability at room temperature, nonlinear optical transmission, and so on. In this paper, the physical characteristic, nonlinear optical response, and ultrafast photonics application of few-layer bismuthene are studied experimentally. By the balanced twin-detector measurement method, the saturable absorption property of few-layer bismuthene with a modulation depth of 2.5% and saturable intensity of 110 MW/cm² at the optical communication band (C-band) is illustrated. Dependent on a few-layer bismuthene saturable absorber, an all-fiber ultrashort pulse laser is fabricated and the proposed fiber laser can operate with coexistence of harmonic mode-locking and dual-wavelength mode-locking. The different laser generations of harmonic and dual wavelength depend on the saturable absorption of few-layer bismuthene, the suitable birefringence and nonlinearity strength in the laser cavity. The results suggest that the ultrashort pulse laser obtained based on few-layer bismuthene could be applied to the field of pump-probe experiments and tunable terahertz radiation generation potentially.

Passively Mode-Locked Fiber Laser with WS2/SiO2 Saturable Absorber Fabricated by Sol-Gel Technique

High-performance ultrafast fiber lasers require saturable absorbers (SAs) of high optical damage threshold and high operation stability. Here, the optical properties and application of the WS₂/SiO₂ SA prepared by the sol-gel method are reported. SiO₂ prepared by sol-gel technique has similar properties to fiber in ultrafast fiber lasers, such as mechanical strength, refractive index, optical transmission, and absorption. For the SA device by the sol-gel method combined with WS₂ material, not only will the additional scattering loss not be introduced, but also, the damage threshold of the SA device can be effectively increased. Furthermore, SA material is wrapped by SiO₂, which insulates the influence of the external environment. Based on the first preparation of the WS₂/SiO₂ glass SA, stable soliton pulses are obtained in ytterbium-doped fiber lasers (YDFLs) with a pulse width of 58 ps, an average output power of 56.8 mW, and a repetition rate of 19.03 MHz. In addition, a stable mode-locked operation with a pulse width of 325 fs and an output power of 39.6 mW is also achieved in an erbium-doped fiber laser (EDFL). These results demonstrate that the WS₂/SiO₂ glass prepared by the sol-gel method can significantly increase laser output power and shorten pulse width in the fiber laser, which provides a new opportunity for the traditional preparation method of the SA device.

Lead sulfide nanoparticles for dual-wavelength ultrashort pulse generation

Nanoparticle materials have many potential applications in the area of electronics and optoelectronics due to their unique and versatile properties. In particular, lead sulfide nanoparticles (PbS NPs) have shown excellent ultrafast photonics and can be applied to communication systems because of their low bandgap, high thermal damage threshold and stability. The wavelength division multiplexor (WDM) technique is vital to fiber optical communication, which allows the transmission of many different-wavelength signals in one fiber cable. However, PbS NPs for multi-wavelength pulse generation has not been reported until now. In this work, PbS NPs have been investigated and successfully applied in an Er-doped fiber laser as a saturable absorber (SA) to generate a dual-wavelength short pulse for the first time. A picosecond-level ultrashort pulse at center wavelengths of 1545 and 1585 nm can be achieved simultaneously or respectively. It is worth mentioning that the two wavelengths are separated up to 40 nm, which can significantly expand the optical communication capacity. The result suggests that PbS NPs as smart nonlinear optical components have wide applications in optical communications, short-pulse lasers, and even high-performance photodectors.

SnSe2 Nanosheets for Subpicosecond Harmonic Mode-Locked Pulse Generation

Tin diselenide (SnSe₂ ) nanosheets as novel 2D layered materials have excellent optical properties with many promising application prospects, such as photoelectric detectors, nonlinear optics, infrared photoelectric devices, and ultrafast photonics. Among them, ultrafast photonics has attracted much attention due to its enormous advantages; for instance, extremely fast pulse, strong peak power, and narrow bandwidth. In this work, SnSe₂ nanosheets are fabricated by using solvothermal treatment, and the characteristics of SnSe₂ are systemically investigated. In addition, the solution of SnSe₂ nanosheets is successfully prepared as a fiber-based saturable absorber by utilizing the evanescent field effect, which can bear a high pump power. 31st-order subpicosecond harmonic mode locking is generated in an Er-doped fiber laser, corresponding to the maximum repetition rate of 257.3 MHz and pulse duration of 887 fs. The results show that SnSe₂ can be used as an excellent nonlinear photonic device in many fields, such as frequency comb, lasers, photodetectors, etc.

InAs/GaAs quantum dot semiconductor saturable absorber for controllable dual-wavelength passively Q-switched fiber laser

We experimentally demonstrate the first use of 1550-nm InAs/GaAs quantum dot semiconductor saturable absorber mirror (QD-SESAM) in the dual-wavelength passively Q-switched (QS) erbium doped fiber (EDF) laser. The dual-wavelength QS lasing was obtained at a pump threshold of 180 mW with the average output power of 2.2 mW and the spacing between the two lasing wavelengths is 14 nm. A large absorption ranging from 1520 to 1590 nm has been realized when no substrate rotation was employed during the molecular beam epitaxy growth of the QD-SESAM indicating the potential to generate a 60 nm spacing of the dual-wavelength QS lasing peaks by changing the positions in the QD-SESAM and replacing EDF by co-doped fiber as gain medium. These results have provided a new opportunity towards achieving the stable and wide wavelength-tunable dual-modes fiber lasers.

Fe3O4 nanoparticles as a saturable absorber for giant chirped pulse generation

Fe₃O₄ nanoparticles (FONPs) are magnetic materials with a small band gap and have well-demonstrated applications in ultrafast photonics, medical science, magnetic detection, and electronics. Very recently, FONPs were proposed as an ideal candidate for pulse generation in fiber-based oscillators. However, the pulses obtained to date are on the order of microseconds, which is too long for real application in communication. Here, we report the use of FONPs synthesized by a sol-hydrothermal method and used as a saturable absorber (SA) to achieve nanosecond pulses in an erbium-doped fiber laser (EDFL) for the first time. The proposed fiber laser is demonstrated to have a narrow spectral width of around 0.8 nm and a fixed fundamental repetition rate (RPR) of 4.63 MHz, whose spectra and pulse dynamics are different from the mode-locked lasers reported previously. It is demonstrated that the proposed fiber laser based on a FONP SA operates in the giant-chirp mode-locked regime. The most important result is the demonstration of a pulse duration of 55 ns at an output power of 16.2 mW, which is the shortest pulse based on FONPs for EDFLs reported to date. Our results demonstrate that the FONP dispersion allows for an excellent photonic material for application in ultrafast photonics devices, photoconductive detectors, and optical modulators.

Characteristics of noise-like pulse with broad bandwidth based on cascaded Raman scattering

A noise-like pulse (NLP) with broadband emission spectrum and superior beam quality from a dispersion managed mode-locked Yb-doped fiber laser has been demonstrated based on stimulated Raman scattering. After insertion of a 150 m long single mode fiber into the laser cavity, the second order stoke wave from 1.3 MHz repetition rate of NLP can be excited. With a 320 mW pump power, the highest pulse energy of NLP was about 35.1 nJ and the emission spectrum was extended from 1000 to 1160 nm. Through a multi-mode fiber laser, the broad bandwidth NLP can produce relatively low speckle noise imaging with contrast below 0.04. The generated NLPs can be used as a superior light source for the biomedical diagnosis and laser projection in the near future.

Mechanism of dissipative-soliton-resonance generation in fiber laser mode-locked by real saturable absorber

Generation of dissipative soliton resonance (DSR) is numerically investigated in an all-normal-dispersion Yb-doped fiber laser mode-locked by a real saturable absorber (SA). In the simulation model, the SA includes both the saturable absorption and reverse saturable absorption (RSA) effects. It is found that the RSA effect induced by the SA material itself plays a dominant role in generating the DSR pulses. We also systematically analyze the influence of key SA parameters on the evolution of DSR pulses in the cavity. Our simulation results not only offer insight into the underlying mechanism of DSR generation in mode-locked fiber lasers by means of real SAs, but also provide a guideline for engineering SA parameters to generate optical pulses with the highest possible energy.

Effect of PVA coating on the electric field intensity distribution and laser damage performance of fused silica optics surfaces

A facile method was proposed to enhance the laser damage performance of the fused silica optics by coating a PVA film on the rear surface of the optics. FDTD simulation result suggests that the PVA coating with suitable thickness can transfer the maximal electric field intensity from the rear surface to the interface between the coating and air, and reduce the electric field intensity of the rear surface remarkably. LIDT tests reveal that the LIDT of fused silica with PVA coating changed periodically with respect to the coating thickness, which agrees well with the tendency predicted by FDTD simulation. Finally, PVA coatings with a thickness of 60 nm and 300 nm can both improve the LIDT of AMP-treated fused silica by ~20%, which provide a potential to be applied in high power laser facility.

Sub-200 femtosecond dispersion-managed soliton ytterbium-doped fiber laser based on carbon nanotubes saturable absorber

Ultrafast fiber laser light sources attract enormous interest due to the booming applications they are enabling, including long-distance communication, optical metrology, detecting technology of infra-biophotons, and novel material processing. In this paper, we demonstrate 175 fs dispersion-managed soliton (DMS) mode-locked ytterbium-doped fiber (YDF) laser based on single-walled carbon nanotubes (SWCNTs) saturable absorber (SA). The output DMSs have been achieved with repetition rate of 21.2 MHz, center wavelength of 1025.5 nm, and a spectral width of 32.7 nm. The operation directly pulse duration of 300 fs for generated pulse is the reported shortest pulse width for broadband SA based YDF lasers. By using an external grating-based compressor, the pulse duration could be compressed down to 175 fs. To the best of our knowledge, it is the shortest pulse duration obtained directly from YDF laser based on broadband SAs. In this paper, SWCNTs-SA has been utilized as the key optical component (mode locker) and the grating pair providing negative dispersion acts as the dispersion controller.

Wavelength and pulse duration tunable ultrafast fiber laser mode-locked with carbon nanotubes

Ultrafast lasers with tunable parameters in wavelength and time domains are the choice of light source for various applications such as spectroscopy and communication. Here, we report a wavelength and pulse-duration tunable mode-locked Erbium doped fiber laser with single wall carbon nanotube-based saturable absorber. An intra-cavity tunable filter is employed to continuously tune the output wavelength for 34 nm (from 1525 nm to 1559 nm) and pulse duration from 545 fs to 6.1 ps, respectively. Our results provide a novel light source for various applications requiring variable wavelength or pulse duration.

Nonlinear Optical Materials for the Smart Filtering of Optical Radiation

The control of luminous radiation has extremely important implications for modern and future technologies as well as in medicine. In this Review, we detail chemical structures and their relevant photophysical features for various groups of materials, including organic dyes such as metalloporphyrins and metallophthalocyanines (and derivatives), other common organic materials, mixed metal complexes and clusters, fullerenes, dendrimeric nanocomposites, polymeric materials (organic and/or inorganic), inorganic semiconductors, and other nanoscopic materials, utilized or potentially useful for the realization of devices able to filter in a smart way an external radiation. The concept of smart is referred to the characteristic of those materials that are capable to filter the radiation in a dynamic way without the need of an ancillary system for the activation of the required transmission change. In particular, this Review gives emphasis to the nonlinear optical properties of photoactive materials for the function of optical power limiting. All known mechanisms of optical limiting have been analyzed and discussed for the different types of materials.

Diversified pulse generation from frequency shifted feedback Tm-doped fibre lasers

Pulsed fibre lasers operating in the eye-safe 2 μm spectral region have numerous potential applications in areas such as remote sensing, medicine, mid-infrared frequency conversion, and free-space communication. Here, for the first time, we demonstrate versatile 2 μm ps-ns pulses generation from Tm-based fibre lasers based on frequency shifted feedback and provide a comprehensive report of their special behaviors. The lasers are featured with elegant construction and the unparalleled capacity of generating versatile pulses. The self-starting mode-locking is initiated by an intra-cavity acousto-optical frequency shifter. Diversified mode-locked pulse dynamics were observed by altering the pump power, intra-cavity polarization state and cavity structure, including as short as 8 ps single pulse sequence, pulse bundle state and up to 12 nJ, 3 ns nanosecond rectangular pulse. A reflective nonlinear optical loop mirror was introduced to successfully shorten the pulses from 24 ps to 8 ps. Beside the mode-locking operation, flexible Q-switching and Q-switched mode-locking operation can also be readily achieved in the same cavity. Up to 78 μJ high energy nanosecond pulse can be generated in this regime. Several intriguing pulse dynamics are characterized and discussed.

Single-wall carbon nanotubes and graphene oxide-based saturable absorbers for low phase noise mode-locked fiber lasers

Low phase noise mode-locked fiber laser finds important applications in telecommunication, ultrafast sciences, material science, and biology, etc. In this paper, two types of carbon nano-materials, i.e. single-wall carbon nanotube (SWNT) and graphene oxide (GO), are investigated as efficient saturable absorbers (SAs) to achieve low phase noise mode-locked fiber lasers. Various properties of these wall-paper SAs, such as saturable intensity, optical absorption and degree of purity, are found to be key factors determining the performance of the ultrafast pulses. Reduced-noise femtosecond fiber lasers based on such carbon-based SAs are experimentally demonstrated, for which the phase noise has been reduced by more than 10 dB for SWNT SAs and 8 dB for GO SAs at 10 kHz. To the best of our knowledge, this is the first investigation on the relationship between different carbon material based SAs and the phase noise of mode-locked lasers. This work paves the way to generate high-quality low phase noise ultrashort pulses in passively mode-locked fiber lasers.

Ultrafast nonlinear photoresponse of single-wall carbon nanotubes: a broadband degenerate investigation

Understanding of the fundamental photoresponse of carbon nanotubes has broad implications for various photonic and optoelectronic devices. Here, Z-scan and pump-probe spectroscopy performed across 600-2400 nm were combined to give a broadband 'degenerate' mapping of the nonlinear absorption properties of single-wall carbon nanotubes (SWNTs). In contrast to the views obtained from non-degenerate techniques, sizable saturable absorption is observed from the visible to the near-infrared range, including the spectral regions between semiconducting excitonic peaks and metallic tube transitions. In addition, the broadband mapping unambiguously reveals a photobleaching to photoinduced absorption transition feature within the first semiconducting excitonic band ∼2100 nm, quantitatively marking the long-wavelength cut-off for saturable absorption of the SWNTs investigated. Our findings present a much clearer physical picture of SWNTs' nonlinear absorption characteristics, and help provide updated design guidelines for SWNT based nonlinear optical devices.

High Power Q-Switched Thulium Doped Fibre Laser using Carbon Nanotube Polymer Composite Saturable Absorber

We have proposed and demonstrated a Q-switched Thulium doped fibre laser (TDFL) with a 'Yin-Yang' all-fibre cavity scheme based on a combination of nonlinear optical loop mirror (NOLM) and nonlinear amplified loop mirror (NALM). Unidirectional lasing operation has been achieved without any intracavity isolator. By using a carbon nanotube polymer composite based saturable absorber (SA), we demonstrated the laser output power of ~197 mW and pulse energy of 1.7 μJ. To the best of our knowledge, this is the highest output power from a nanotube polymer composite SA based Q-switched Thulium doped fibre laser.

WS(2)/fluorine mica (FM) saturable absorbers for all-normal-dispersion mode-locked fiber laser

The report firstly propose a new WS(2) absorber based on fluorine mica (FM) substrate. The WS(2) material was fabricated by thermal decomposition method. The FM was stripped into one single layer as thin as 20 μm and deposited WS(2) on it, which can be attached to the fiber flank without causing the laser deviation. Similar to quartz, the transmission rate of FM is as high as 90% at near infrared wavelength from one to two micrometers. Furthermore, FM is a highly elastic material so that it is not easy to break off even its thickness was only 20 μm. On the contrary, quartz is hard to be processed and easy to break off when its thickness is less than 100 μm. Compared to organic matrix such as polyvinyl alcohol (PVA), FM has higher softening temperature, heat dissipation and laser damage threshold than those of organic composites. In our work, the modulation depth (MD) and non-saturable losses (NLs) of this kind of saturable absorber were measured to be 5.8% and 14.8%, respectively. The WS(2)/FM absorber has a high damage threshold of 406 MW/cm(2), two times higher than that of WS(2)/PVA. By incorporating the saturable absorber into Yb-doped fiber laser cavity, a mode-locked fiber laser was achieved with central wavelength of 1052.45 nm. The repetition rate was 23.26 MHz and the maximum average output power was 30 mW. The long term stability of working was proved to be good too. The results indicate that WS(2)/FM film is a practical nonlinear optical material for photonic applications.

WS₂ saturable absorber for dissipative soliton mode locking at 1.06 and 1.55 µm

Transition-metal dichalcogenides, such as tungsten disulfide (WS2) and molybdenium disulfide (MoS2), are highly anisotropic layered materials and have attracted growing interest from basic research to practical applications due to their exotic physical property that may complement graphene and other semiconductor materials. WS2 nanosheets are found to exhibit broadband nonlinear saturable absorption property, and saturable absorbers (SAs) are fabricated by depositing WS2 nanosheets on side-polished fibers. Attributing to the weak evanescent field and long interaction length, the WS2 nanosheets are not exposed to large optical intensity, which allows the SA to work at the high-power regime. The SAs are used to mode lock erbium- and ytterbium-doped fiber lasers with normal dispersion, producing trains of dissipative soliton at 1.55 and 1.06 µm respectively. Simulations show that the bandgap of WS2 nanosheets decreases from 1.18 to 0.02 and 0.65 eV by introducing W and S defects respectively, which may contribute to the broadband saturable absorption property of the WS2.

Switchable dual-wavelength Q-switched and mode-locked fiber lasers using a large-angle tilted fiber grating

We proposed and demonstrated pulsed fiber lasers Q-switched and mode-locked by using a large-angle tilted fiber grating, for the first time to our best knowledge. Owing to the unique polarization properties of the large-angle tilted fiber grating (LA-TFG), i.e. polarization-dependent loss and polarization-mode splitting, switchable dual-wavelength Q-switched and mode-locked pulses have been achieved with short and long cavities, respectively. For the mode-locking case, the laser was under the operation of nanosecond rectangular pulses, due to the peak-power clamping effect. With the increasing pump power, the durations of both single- and dual-wavelength rectangular pulses increase. It was also found that each filtered wavelength of the dual-wavelength rectangular pulse corresponds to an individual nanosecond rectangular pulse by employing a tunable bandpass filter.