LCD panel characterization by measuring full Jones matrix of individual pixels using polarization-sensitive digital holographic microscopy

Vectorial inverse scattering for dielectric tensor tomography: overcoming challenges of reconstruction of highly scattering birefringent samples

Many important microscopy samples, such as liquid crystals, biological tissue, or starches, are birefringent in nature. They scatter light differently depending on the polarization of the light and the orientation of the molecules. The complete characterization of a birefringent sample is a challenging task because its 3 × 3 dielectric tensor must be reconstructed at every three-dimensional position. Moreover, obtaining a birefringent tomogram is more arduous for thick samples, where multiple light scattering should also be considered. In this study, we developed a new dielectric tensor tomography algorithm that enables full characterization of highly scattering birefringent samples by solving the vectoral inverse scattering problem while accounting for multiple light scattering. We proposed a discrete image-processing theory to compute the error backpropagation of vectorially diffracting light. Finally, our theory was experimentally demonstrated using both synthetic and biologically birefringent samples.

Regularization of dielectric tensor tomography

Dielectric tensor tomography reconstructs the three-dimensional dielectric tensors of microscopic objects and provides information about the crystalline structure orientations and principal refractive indices. Because dielectric tensor tomography is based on transmission measurement, it suffers from the missing cone problem, which causes poor axial resolution, underestimation of the refractive index, and halo artifacts. In this study, we study the application of total variation and positive semi-definiteness regularization to three-dimensional tensor distributions. In particular, we demonstrate the reduction of artifacts when applied to dielectric tensor tomography.

Complex spatial light modulation capability of a dual layer in-plane switching liquid crystal panel

Complex spatial light modulator (SLM), which can simultaneously control the amplitude and phase of light waves, is a key technology for wide-range of wave-optic technologies including holographic three-dimensional displays. This paper presents a flat panel complex spatial light modulator that consists of dual in-plane switching liquid crystal panels with double-degrees of freedom of voltage inputs. The proposed architecture features single-pixel level complex light modulation enabling complex light modulation in entire free space, which is most contrast to conventional macro-pixel based complex modulation techniques. Its complex light modulation capability is verified with theoretical simulation and experimental characterization, and a three-dimensional holographic image reconstruction without conjugate noise. It is believed that the proposed flat panel complex SLM can be an essential device for a wide range of advanced wave optic technologies.

Imaging of nanoscale birefringence using polarization-resolved chromatic confocal microscopy

We demonstrate a homebuilt confocal microscope with ∼60 nm axial resolution to visualize the optical path length (OPL) of liquid crystals (LCs) inside a 2-domain alignment LC cell. Since the microscope is sensitive to light polarization, it is capable of determining LC orientation by accounting for the OPL variation, ΔOPL. The resolution of birefringence depends on the measured ΔOPL from two cross-polarized channel detections, of which the concept is different from other polarization-resolved optical imaging techniques, but is relatively simple in optical layout and analysis. The different orientations of LCs and the voltage-dependent LC rotation properties in the 2-domain LC cell are monitored and analyzed. Additionally, the complicated LC orientation distribution at the junction of the two domains with different alignments can be clearly observed. It shows great possibilities of examining tissue birefringence related to disease progression and tiny birefringence variation of electro-optical materials under an external field, which are hardly resolved by conventional optical imaging techniques.

Polarization-Sensitive Digital Holographic Imaging for Characterization of Microscopic Samples: Recent Advances and Perspectives

Polarization-sensitive digital holographic imaging (PS-DHI) is a recent imaging technique based on interference among several polarized optical beams. PS-DHI allows simultaneous quantitative three-dimensional reconstruction and quantitative evaluation of polarization properties of a given sample with micrometer scale resolution. Since this technique is very fast and does not require labels/markers, it finds application in several fields, from biology to microelectronics and micro-photonics. In this paper, a comprehensive review of the state-of-the-art of PS-DHI techniques, the theoretical principles, and important applications are reported.

Characterization of a spatial light modulator using polarization-sensitive digital holography

We show a digital holographic approach for polarimetric characterization of a twisted nematic liquid crystal spatial light modulator (TNLC-SLM). An experimental scheme is designed to perform polarization analysis of the SLM with gray levels. This is realized by simultaneous detection of the polarization states of the light from the SLM for a given gray level with the help of a specially designed spatial-frequency multiplex polarization interferometer. This provides amplitude and phase characteristics of the SLM in a single shot. In order to characterize the SLM, we perform Jones matrix imaging at its various gray values (driving voltages), and corresponding results are presented. These results are expected to be useful in designing and developing various SLM-based experiments in the scalar and vectorial domain.

Real-time measurement of the liquid-crystal optic-axis angle and effective refractive index distribution based on a common-path interferometer

A common-path interferometer for the real-time measurement of the liquid-crystal (LC) optic-axis angle and effective refractive index distribution is proposed. This method involves adding a polarizer and polarization camera to a general optical microscope. This requires only single-exposure imaging without changing any optical elements, and greatly simplifies the measurement process and system. In addition, the measurement results are unaffected by light-source power fluctuations or a non-uniform spatial distribution. Therefore, this method is suitable for measuring the LC optic-axis angle and effective refractive index of electrically controlled LC devices. Finally, the feasibility and validity of the proposed method are verified by simulation and experimentation.

Reference-free polarization-sensitive quantitative phase imaging using single-point optical phase conjugation

We propose and experimentally demonstrate a method of polarization-sensitive quantitative phase imaging using two photodetectors and a digital micromirror device. Instead of recording wide-field interference patterns, finding the modulation patterns maximizing focused intensities in terms of the polarization states enables polarization-dependent quantitative phase imaging without the need for a reference beam and an image sensor. The feasibility of the present method is experimentally validated by reconstructing Jones matrices of several samples including a polystyrene microsphere, a maize starch granule, and a mouse retinal nerve fiber layer. Since the present method is simple and sufficiently general, we expect that it may offer solutions for quantitative phase imaging of birefringent materials.

Radiotherapy dose-volume parameters predict videofluoroscopy-detected dysphagia per DIGEST after IMRT for oropharyngeal cancer: Results of a prospective registry

PURPOSE

Our primary aim was to prospectively validate retrospective dose-response models of chronic radiation-associated dysphagia (RAD) after intensity modulated radiotherapy (IMRT) for oropharyngeal cancer (OPC). The secondary aim was to validate a grade ≥2 cut-point of the published videofluoroscopic dysphagia severity (Dynamic Imaging Grade for Swallowing Toxicity, DIGEST) as radiation dose-dependent.

MATERIAL AND METHODS

Ninety-seven patients enrolled on an IRB-approved prospective registry protocol with stage I-IV OPC underwent pre- and 3-6 month post-RT videofluoroscopy. Dose-volume histograms (DVH) for swallowing regions of interest (ROI) were calculated. Dysphagia severity was graded per DIGEST criteria (dichotomized with grade ≥2 as moderate/severe RAD). Recursive partitioning analysis (RPA) and Bayesian Information Criteria (BIC) were used to identify dose-volume effects associated with moderate/severe RAD.

RESULTS

31% developed moderate/severe RAD (i.e. DIGEST grade ≥2) at 3-6 months after RT. RPA found DVH-derived dosimetric parameters of geniohyoid/mylohyoid (GHM), superior pharyngeal constrictor (SPC), and supraglottic region were associated with DIGEST grade ≥2 RAD. V61 ≥ 18.57% of GHM demonstrated optimal model performance for prediction of DIGEST grade ≥2.

CONCLUSION

The findings from this prospective longitudinal registry validate prior observations that dose to submental musculature predicts for increased burden of dysphagia after oropharyngeal IMRT. Findings also support dichotomization of DIGEST grade ≥2 as a dose-dependent split for use as an endpoint in trials or predictive dose-response analysis of videofluoroscopy results.

Measurements of polarization-dependent angle-resolved light scattering from individual microscopic samples using Fourier transform light scattering

We present a method to measure the vector-field light scattering of individual microscopic objects. The polarization-dependent optical field images are measured with quantitative phase imaging at the sample plane, and then numerically propagated to the far-field plane. This approach allows the two-dimensional polarization-dependent angle-resolved light scattered patterns from individual object to be obtained with high precision and sensitivity. Using this method, we present the measurements of the polarization-dependent light scattering of a liquid crystal droplet and individual silver nanowires over scattering angles of 50°. In addition, the spectroscopic extension of the polarization-dependent angle-resolved light scattering is demonstrated using wavelength-scanning illumination.

Measurements of complex refractive index change of photoactive yellow protein over a wide wavelength range using hyperspectral quantitative phase imaging

A novel optical holographic technique is presented to simultaneously measure both the real and imaginary components of the complex refractive index (CRI) of a protein solution over a wide visible wavelength range. Quantitative phase imaging was employed to precisely measure the optical field transmitted from a protein solution, from which the CRIs of the protein solution were retrieved using the Fourier light scattering technique. Using this method, we characterized the CRIs of the two dominant structural states of a photoactive yellow protein solution over a broad wavelength range (461-582 nm). The significant CRI deviation between the two structural states was quantified and analysed. The results of both states show the similar overall shape of the expected rRI obtained from the Kramers-Kronig relations.

Three-dimensional label-free imaging and analysis of Pinus pollen grains using optical diffraction tomography

The structure of pollen grains is related to the reproductive function of the plants. Here, three-dimensional (3D) refractive index maps were obtained for individual conifer pollen grains using optical diffraction tomography (ODT). The 3D morphological features of pollen grains from pine trees were investigated using measured refractive index maps, in which distinct substructures were clearly distinguished and analyzed. Morphological and physiochemical parameters of the pollen grains were quantified from the obtained refractive index (RI) maps and used to quantitatively study the interspecific differences of pollen grains from different strains. Our results demonstrate that ODT can assess the structure of pollen grains. This label-free and rapid 3D imaging approach may provide a new platform for understanding the physiology of pollen grains.

Double-channel angular-multiplexing polarization holography with common-path and off-axis configuration

We propose a double-channel angular-multiplexing polarization holographic imaging system with common-path and off-axis configurations. In the system, its input plane is spatially divided into three windows: an object window and two reference windows, and two orthogonal linear polarizers are attached, respectively, on the two reference windows; a two-dimensional cross grating is inserted between the input and output planes of the system. Thus the object beam passing through the object window and the two orthogonal polarized reference beams passing through the two reference windows can overlap each other at the output plane of the system and form a double-channel angular-multiplexing polarization hologram (DC-AM-PH). Using this system, the complex amplitude distributions of two orthogonal polarized components from an object can be recorded and reconstructed by one single-shot DC-AM-PH at the same time. Theoretical analysis and experimental results demonstrated that the system can be used to measure the Jones matrix parameters of polarization-sensitive or birefringent materials.

Fiber-based lensless polarization holography for measuring Jones matrix parameters of polarization-sensitive materials

We report a fiber-based lensless holographic imaging system to realize a single-shot measurement of two dimensional (2-D) Jones matrix parameters of polarization-sensitive materials. In this system, a multi-source lensless off-axis Fresnel holographic recording geometry is adopted, and two optical fiber splitters are used to generate the multiple reference and illumination beams required for recording a four-channel angular-multiplexing polarization hologram (AMPH). Using this system and the method described in this paper, spatially resolved Jones matrix parameters of a polarization-sensitive material can be retrieved from one single-shot AMPH. We demonstrate the feasibility of the method by extracting a 2-D Jones matrix of a composite polarizer. Applications of the method to measure the Jones matrix maps of a stressed polymethyl methacrylate sample and a mica fragment are also presented. Benefit from the fiber-based and lensless off-axis holographic design, the system possesses a quite compact configuration, which provides a feasible approach for development of an integrated and portable system to measure Jones matrix parameters of polarization-sensitive materials.

Integrated quantitative phase and birefringence microscopy for imaging malaria-infected red blood cells

A dual-modality birefringence/phase imaging system is presented. The system features a crystal retarder that provides polarization mixing and generates two interferometric carrier waves in a single signal spectrum. The retardation and orientation of sample birefringence can then be measured simultaneously based on spectral multiplexing interferometry. Further, with the addition of a Nomarski prism, the same setup can be used for quantitative differential interference contrast (DIC) imaging. Sample phase can then be obtained with two-dimensional integration. In addition, birefringence-induced phase error can be corrected using the birefringence data. This dual-modality approach is analyzed theoretically with Jones calculus and validated experimentally with malaria-infected red blood cells. The system generates not only corrected DIC and phase images, but a birefringence map that highlights the distribution of hemozoin crystals.

Nonlinear dynamic phase response calibration by digital holographic microscopy

An accurate phase characterization method by digital holographic microscopy for spatial light modulators (SLMs) is proposed. This method permits high precision measurement for individual SLM pixels. Based on this method, the nonlinear dynamic phase response of the SLM is analyzed and calibrated in two steps: the global phase calibration and the local phase calibration. After the calibrations, both the phase modulation deficiency and the sharp phase jump of the 26-step grating are optimized. The root mean square error of the phase grating is reduced from 1.6319 to 0.2132 rad. The accurate phase distribution control may find various applications concerning high-resolution and high-accuracy wavefront modulation.

Label-free identification of individual bacteria using Fourier transform light scattering

Rapid identification of bacterial species is crucial in medicine and food hygiene. In order to achieve rapid and label-free identification of bacterial species at the single bacterium level, we propose and experimentally demonstrate an optical method based on Fourier transform light scattering (FTLS) measurements and statistical classification. For individual rod-shaped bacteria belonging to four bacterial species (Listeria monocytogenes, Escherichia coli, Lactobacillus casei, and Bacillus subtilis), two-dimensional angle-resolved light scattering maps are precisely measured using FTLS technique. The scattering maps are then systematically analyzed, employing statistical classification in order to extract the unique fingerprint patterns for each species, so that a new unidentified bacterium can be identified by a single light scattering measurement. The single-bacterial and label-free nature of our method suggests wide applicability for rapid point-of-care bacterial diagnosis.

Quantitative polarized light microscopy using spectral multiplexing interferometry

We propose an interferometric spectral multiplexing method for measuring birefringent specimens with simple configuration and high sensitivity. The retardation and orientation of sample birefringence are simultaneously encoded onto two spectral carrier waves, generated interferometrically by a birefringent crystal through polarization mixing. A single interference spectrum hence contains sufficient information for birefringence determination, eliminating the need for mechanical rotation or electrical modulation. The technique is analyzed theoretically and validated experimentally on cellulose film. System simplicity permits the possibility of mitigating system birefringence background. Further analysis demonstrates the technique's exquisite sensitivity as high as ∼20  pm for retardation measurement.

Focusing through turbid media by polarization modulation

We demonstrate that polarization modulation of an illumination beam can effectively control the spatial profile of the light transmitted through turbid media. Since the transmitted electric fields are completely mingled in turbid media, polarization states of an illumination beam can be used effectively to control the propagation of light through turbid media. Numerical simulations were performed which agree with experimental results obtained using a commercial in-plane switching liquid crystal display for modulating the input polarization states.