Terahertz pulse propagation in 3D-printed waveguide with metal wires component

Cascaded terahertz hollow-core Bragg waveguide: numerical design and experimental demonstration

A THz hollow-core Bragg waveguide with discontinuous support bridges in both radial and axial directions is proposed. The influence of the support bridges on the transmission loss of the waveguide is demonstrated numerically. The proposed waveguide shows confinement loss two orders of magnitude lower than that of the Bragg waveguide with conventional support bridges. A waveguide sample is fabricated by 3D printing technology, and the experimental results show that the transmission loss is in agreement with that of the simulation results. It is also demonstrated that the transmission loss of the fabricated waveguide is mainly determined by the large absorption loss of the waveguide material used in the experiment.

Terahertz optical fibers [Invited]

Lying between optical and microwave ranges, the terahertz band in the electromagnetic spectrum is attracting increased attention. Optical fibers are essential for developing the full potential of complex terahertz systems. In this manuscript, we review the optimal materials, the guiding mechanisms, the fabrication methodologies, the characterization methods and the applications of such terahertz waveguides. We examine various optical fiber types including tube fibers, solid core fiber, hollow-core photonic bandgap, anti-resonant fibers, porous-core fibers, metamaterial-based fibers, and their guiding mechanisms. The optimal materials for terahertz applications are discussed. The past and present trends of fabrication methods, including drilling, stacking, extrusion and 3D printing, are elaborated. Fiber characterization methods including different optics for terahertz time-domain spectroscopy (THz-TDS) setups are reviewed and application areas including short-distance data transmission, imaging, sensing, and spectroscopy are discussed.

Terahertz Hollow Core Antiresonant Fiber with Metamaterial Cladding

A hollow core antiresonant photonic crystal fiber (HC-ARPCF) with metal inclusions is numerically analyzed for transmission of terahertz (THz) waves. The propagation of fundamental and higher order modes are investigated and the results are compared with conventional dielectric antiresonant (AR) fiber designs. Simulation results show that broadband terahertz radiation can be guided with six times lower loss in such hollow core fibers with metallic inclusions, compared to tube lattice fiber, covering a single mode bandwidth (BW) of 700 GHz.

Plasmonic waveguide with folded stubs for highly confined terahertz propagation and concentration

We proposed a novel planar terahertz (THz) plasmonic waveguide with folded stub arrays to achieve excellent terahertz propagation performance with tight field confinement and compact size based on the concept of spoof surface plasmon polaritons (spoof SPPs). It is found that the waveguide propagation characteristics can be directly manipulated by increasing the length of the folded stubs without increasing its lateral dimension, which exhibits much lower asymptotic frequency of the dispersion relation and even tighter terahertz field confinement than conventional plasmonic waveguides with rectangular stub arrays. Based on this waveguiding scheme, a terahertz concentrator with gradual step-length folded stubs is proposed to achieve high terahertz field enhancement, and an enhancement factor greater than 20 is demonstrated. This work offers a new perspective on very confined terahertz propagation and concentration, which may have promising potential applications in various integrated terahertz plasmonic circuits and devices, terahertz sensing and terahertz nonlinear optics.

3D printed dielectric rectangular waveguides, splitters and couplers for 120 GHz

We use a 3D printer to fabricate rectangular dielectric single mode waveguides for 120 GHz. The rectangular waveguides consisting of polystyrene showed an attenuation of 6.3 dB/m, which is low enough for short devices. We also characterize 3D printed Y-splitters and a 1x3-splitter based on multimode interference. Further, we construct and measure a variable planar waveguide coupler which can be used as a 3-dB coupler, a cross-coupler and no coupler at all.

3D printed low-loss THz waveguide based on Kagome photonic crystal structure

A low-loss hollow core terahertz waveguide based on Kagome photonic crystal structure has been designed and fabricated by 3D printing. The 3D printed waveguide has been characterized by using THz time-domain spectroscopy. The results demonstrate that the obtained waveguide features average power propagation loss of 0.02 cm^-1 for 0.2-1.0 THz (the minimum is about 0.002 cm^-1 at 0.75 THz). More interesting, it could be simply mechanically spliced without any additional alignment, while maintaining the excellent performance. The 3D printing technique will be a promising solution to fabricate Kagome THz waveguide with well controllable characteristics and low cost.

Linearly polarized single TM mode terahertz waveguide

We design a hollow-core terahertz (THz) waveguide guiding a single linearly polarized mode. This is achieved using a hybrid cladding, where we introduce a ring of subwavelength structures, including metal wires and air-holes. The wire-based cladding is extremely anisotropic, reflecting only transverse magnetic (TM) modes. The polarization of TM modes is further manipulated by replacing some wires with air-holes. Numerical simulations confirm the guidance of only an x-polarized TM₂ mode over 0.36-0.46 THz in a wavelength-scale core (diameter of 1 mm). The propagation losses are of the order 0.25  dB/cm, with low bend losses <0.3  dB/cm at 0.4 THz for a bend radius of 5 cm.