Living-cell imaging using a photonic crystal nanolaser array

Experimental demonstration of mode selection in bridge-coupled metallo-dielectric nanolasers

We experimentally demonstrate bridge-coupled metallo-dielectric nanolasers that can operate in the in-phase or out-of-phase locking modes at room temperature. By varying the length of the bridge, we show that the coupling coefficients can be realized in support of the stable operation of any of these two modes. Both coupled nanolaser designs have been fabricated and characterized for experimental validation. Their lasing behavior has been confirmed by the spectral evolution, light-in light-out characterizations, and emission linewidth narrowing. The operating mode is identified from the near-field and far-field emission pattern measurements. To the best of our knowledge, this is the first demonstration of mode selection in bridge-coupled metallo-dielectric nanolasers, which can serve as building blocks in nanolaser arrays for applications in imaging, virtual reality devices, and lidars.

Biomimetic design of photonic materials for biomedical applications

Photonic crystal (PC) materials with bio-inspired structure colors have drawn increasing attention as their potentials have been rapidly progressed in the field of biomedicine. After elaborate integration with smart materials or preparations through advanced techniques, PC materials have shown significant advantages in biosensing, bio-probing, bio-screening, tissue engineering, and so forth. In this review, we first introduced the fundamentals of PC materials as well as their fabrication strategies with different dimensional outputs. Based on these diversified PC materials, their biomedical potentials as biosensing elements, cell carriers, drug delivery systems, screening methods, cell scaffolds for tissue engineering, cell imaging probes, as well as the monitoring means for biological processes were then highlighted. In addition to these, we finally listed and discussed some emerging applications of PCs integrated with functional materials and newly developed material engineering technologies. In short, this review will provide a panoramic view of PCs-based biomedicines, and moreover, the progressive discussions from fundamentals to advanced applications in this review may also encourage researchers to innovate PC materials or devices for broader biomedical applications.

Photonic and Iontronic Sensing in GaInAsP Semiconductor Photonic Crystal Nanolasers

The GaInAsP semiconductor photonic crystal nanolaser operates at room temperature by photopumping and emits near-infrared light at a wavelength longer than 1.3 μm. Immersion of the nanolaser in a solution causes its laser characteristics to change. Observation of this phenomenon makes it possible to perform biosensing without a fluorescent label or a chromogenic substrate. The most common phenomenon between many photonic sensors is that the resonance wavelength reflects the refractive index of attached media; an index change of 2.5 × 10−4 in the surrounding liquid can be measured through an emission wavelength shift without stabilization. This effect is applicable to detecting environmental toxins and cell behaviors. The laser emission intensity also reflects the electric charge of surface ions. The intensity varies when an electrolyte or a negatively charged deoxyribonucleic acid (DNA), which is positively or negatively charged in water, is accumulated on the surface. This effect allows us to detect the antigen-antibody reaction of a biomarker protein from only the emission intensity without any kind of spectroscopy. In detecting a small amount of DNA or protein, a wavelength shift also appears from its concentration that is 2–3 orders of magnitude lower than those of the conventional chemical methods, such as the enzyme-linked immuno-solvent assay. It is unlikely that this wavelength behavior at such low concentrations is due to the refractive index of the biomolecules. It is observed that the electric charge of surface ions is induced by various means, including plasma exposure and an electrochemical circuit shifting the wavelength. This suggests that the superhigh sensitivity is also due to the effect of charged ions. Thus, we call this device an iontronic photonic sensor. This paper focuses on such a novel sensing scheme of nanolaser sensor, as an example of resonator-based photonic sensors, in addition to the conventional refractive index sensing.

High-frequency dynamics of evanescently-coupled nanowire lasers

We analyse the dynamics and conditions for stability in an array of two laterally-coupled nanowire lasers in terms of their separation, difference in resonant frequencies and pumping rate under conditions of weak coupling. We find that the regions of stability are very small and are found close to zero frequency offset between the lasers. Outside these regions various forms of instability including periodic oscillation, chaos and complex dynamics are predicted. Importantly, the analysis of the frequency of periodic oscillations for realistic laser separations and pumping yields values of order 100 GHz thus underlining the significant potential of nanowire laser arrays for ultra-high frequency on-chip systems with very low foot-print and energy requirements.

Label-Free Optical Single-Molecule Micro- and Nanosensors

Label-free optical sensor systems have emerged that exhibit extraordinary sensitivity for detecting physical, chemical, and biological entities at the micro/nanoscale. Particularly exciting is the detection and analysis of molecules, on miniature optical devices that have many possible applications in health, environment, and security. These micro- and nanosensors have now reached a sensitivity level that allows for the detection and analysis of even single molecules. Their small size enables an exceedingly high sensitivity, and the application of quantum optical measurement techniques can allow the classical limits of detection to be approached or surpassed. The new class of label-free micro- and nanosensors allows dynamic processes at the single-molecule level to be observed directly with light. By virtue of their small interaction length, these micro- and nanosensors probe light-matter interactions over a dynamic range often inaccessible by other optical techniques. For researchers entering this rapidly advancing field of single-molecule micro- and nanosensors, there is an urgent need for a timely review that covers the most recent developments and that identifies the most exciting opportunities. The focus here is to provide a summary of the recent techniques that have either demonstrated label-free single-molecule detection or claim single-molecule sensitivity.

Sensitive and selective detection of prostate-specific antigen using a photonic crystal nanolaser

The detection of low-concentration biomarkers is expected to facilitate the early diagnosis of severe diseases, including malignant tumors. Using photonic crystal nanolaser sensors, we detected prostate-specific antigen (PSA) from a concentration of 1 fM, which is difficult to detect by conventional enzyme-linked immunosorbent assay. The signal intensity and stability were improved by using a surfactant (i.e., ethanolamine). Even when a contaminant such as bovine serum albumin was mixed into the PSA sample, thereby increasing the concentration of the contaminant ten billion times, it was still possible to maintain a high level of detection.

Cell imaging using GaInAsP semiconductor photoluminescence

We demonstrate label-free imaging of living cells using a GaInAsP semiconductor imaging plate. The photoluminescence (PL) intensity is changed by immersing the semiconductor wafer in different pH solutions and by depositing charged polyelectrolytes on the wafer. Various observations indicate that this phenomenon arises from the radiative and surface recombination rates modified by the Schottky barrier at the charged semiconductor surface. HeLa cancer cells were cultured on the semiconductor, and PL was observed using a near-infrared camera. The semiconductor areas with the cells attached exhibited characteristic PL profiles, which might reflect the attachment and surface condition of the cells, cellular matrix, and other substances.