Towards femtosecond laser written arrayed waveguide gratings

From near-UV to long-wave infrared waveguides inscribed in barium fluoride using a femtosecond laser

Depressed-cladding waveguides (DCWs) of various sizes were inscribed in barium fluoride, allowing single-mode operation in the entirety of its transmission window (λ=0.2-12µm). Using femtosecond laser pulses at 515 nm, type I laser modified tracks were overlapped to form circular waveguides, whose cross-sectional geometry and numerical aperture were tailored to accommodate 0.405, 2.85, and 10.6 µm light. The mode profile, propagation loss, refractive index profile, and numerical aperture of the optimized waveguides were analyzed and compared with theory. We particularly demonstrate the challenging inscription of a large DCW for single-mode operation at 10.6 µm with propagation loss of <0.63dB/cm.

Near IR stationary wave Fourier transform lambda meter in lithium niobate: multiplexing and improving optical sampling using spatially shifted nanogroove antenna

Several integrated optics solutions currently exist to develop monolithic, robust, and lightweight high-resolution spectrometers for spatial applications. An interesting option is generating a stationary wave inside a single-mode waveguide, and sampling the interference fringes using dielectric discontinuities on the surface of the waveguide. This allows the recording of the signal on a detector on top of the waveguide, and using dedicated Fourier transform methods to recover the spectrum of the source. All the difficulty is then linked to the length of the interferogram that is sampled. This determines the spectral resolution and the spacing between sampling centers, which are ultimately limited by the pixel pitch, and that will determine the spectral range of the spectrum. In addition, the dielectric discontinuities that will extract the flux from the waveguide have a relatively wide angular emission, resulting in crosstalk between pixels, and reducing the effective sampling step. Finally, the optical sensitivity of these systems is limited since the waveguides are single mode. Therefore, improving the efficiency of stationary wave Fourier transform spectrometers will require reducing the angular divergence of the sampled signal, reducing the sampling step, and increasing the optical input collection capacity. To achieve the two latest conditions, one interesting approach is spatial multiplexing. In this paper, we present the proof of concept of a multiplexed integrated optics Fourier transform spectrometer based on lithium niobate waveguides, using focused ion beam nanogrooves as sampling centers. The spatially shifted position of the antennas between consecutive waveguides will allow us to determine an unknown wavelength with tens of picometer resolution. The extraction efficiency and bandwidth of the antennas will be theoretically studied to optimize their periodicity and match a given pixel pitch. Finally, the ability to develop this concept on an electro-optic material will be of great interest to achieve further active phase modulation and increase the spectral bandwidth.

Beam shaping of a broad-area laser diode using 3D integrated optics

Typical high power broad-area semiconductor lasers exhibit a highly astigmatic beam profile. However, many applications require a homogenous and circular symmetric beam. Thus coupling into circular multimode optical fibers is often employed. The strip-like astigmatic output of the diode laser underfills the circular multimode fiber, thus a decrease in beam quality occurs after fiber coupling due to mode mixing inside the optical fiber. This Letter presents a 3D integrated optics approach to shape the output of a broad-area laser diode. Ultrafast laser inscription is utilized to create a pair of photonic lanterns connected back to back inside a glass chip that captures and shapes the output of a commercial 976 nm wavelength broad-area laser diode with 95 μm emitter width. Compared to coupling to a 105 μm diameter, 0.15 numerical aperture step-index multimode fiber, the photonic chip-based approach results in a 13× higher beam quality and 7× greater brightness.

Investigation of structural mechanisms of laser-written waveguide formation through third-harmonic microscopy

The mechanisms of laser-induced modification of transparent materials are complex combinations of different processes that depend on the material itself and a range of processing parameters. As such, the mechanisms are still subject to ongoing study. We use a custom-built adaptive third-harmonic generation (THG) microscope to study those mechanisms. New femtosecond-laser-written phenomena are revealed through this method of imaging. This Letter, together with previous reports by Miyamoto Opt. Express24, 25718 (2016)OPEXFF1094-408710.1364/OE.24.025718 and Fernandez J. Phys. D48, 155101 (2015)JPAPBE0022-372710.1088/0022-3727/48/15/155101 suggest that the distribution of the generated plasma during writing is responsible for the newly revealed phenomena.

Femtosecond laser inscription of depressed cladding single-mode mid-infrared waveguides in sapphire

Mid-infrared optical waveguides were inscribed in sapphire with femtosecond pulses at 515 nm. We show that such pulses induce a smooth negative refractive index change allowing for the inscription of a depressed cladding waveguide by closely overlapping the corresponding type I modification traces. The resulting structure consists of a highly symmetrical, uniform, and homogeneous waveguide. The size and numerical aperture of the waveguides were tailored to achieve efficient transmission in the mid-infrared. Single mode operation at a wavelength of 2850 nm and propagation loss of <0.37  dB/cm are reported for a 33 mm long depressed cladding waveguide. Thermal annealing was performed, and the refractive index contrast was still preserved to 50% (i.e., Δn=∼2.5×10^-3) up to 1400°C.

Novel concept for visible and near infrared spectro-interferometry: laser-written layered arrayed waveguide gratings

With the growing complexity of astronomical instruments devoted to interferometry, such as MATISSE (a 4 telescope beam combiner) or FIRST (a 9 sub-apertures beam combiner), and the rebirth of space projects such as LIFE (a mid-infrared interferometer), integrated optics devices can be an interesting and complementary approach for beam combination of a large number of apertures. Moreover, one of the approaches for beam combination is pairwise combination of the inputs (either from individual telescopes or from aperture masking on a single telescope), which scales as N(N-1)/2 for an N input system. Astrophotonics devices are attractive to reduce mass and system complexity, while achieving all the beam combination in a single chip, even for a high number of inputs. The aim of this work is to develop a compact photonic device for astronomical applications and demonstrate a proof-of-concept of a spectro-interferometer. In this paper ultrafast laser inscription is used to fabricate three arrayed waveguide gratings (AWGs) stacked vertically. This arrangement enables spectral dispersion and interferometry to be measured simultaneously. Individual AWGs were designed for operation at 633 nm, and demonstrated at 633nm and 830nm. A scan between 790 and 830nm was also achieved to study the wavelength behavior of the AWG. Using a segmented mirror, light at 633nm or 830nm was injected simultaneously into three AWGs layered 40 µm apart, showing analogous behavior for all three layers and no unexpected crosstalk. Finally the three outputs were vertically combined to obtain interference fringes, showing the feasibility of spectro-interferometry and opening the way for compact astrophotonic devices devoted to phase closure studies, used in astronomy to reduce the effect of atmospheric turbulence.

Silicon microsphere whispering gallery modes excited by femtosecond-laser-inscribed glass waveguides

We report on the coupling of whispering gallery modes in a 500-μm-radius silicon microsphere to a femtosecond-laser-inscribed glass optical waveguide. The shallow glass waveguide with a large mode field diameter in the near-infrared is written at a depth of 25 μm below the glass surface, resulting in a high excitation impact parameter of 525 μm for the microsphere. The excited whispering gallery modes of the silicon microsphere have quality factors of approximately 10⁵ in the 90° elastic scattering and 0° transmission. Integration of such spherical silicon microresonators on femtosecond-laser-inscribed glass waveguides is promising for photonic communication, computation, and sensing applications.

Femtosecond laser written arrayed waveguide gratings with integrated photonic lanterns

We demonstrate for the first time functional arrayed waveguide gratings (AWGs) fabricated using the femtosecond laser direct-write technique. This fabrication technique is a mask-less alternative to lithography enabling design flexibility and rapid prototyping. It is ideal for customized small scale production for new applications. The devices were demonstrated in the visible region at 632.8 nm with a measured free spectral range (FSR) of 22.2 nm, and 1.35 nm resolution. To highlight the advantages of using a 3-dimensional fabrication technique, a 3-port photonic lantern was integrated with an AWG in a single monolithic chip. Integration of this type is not feasible with lithography-based AWG fabrication and can increase the functionality of AWGs for sensing applications.

Near infrared spectro-interferometer using femtosecond laser written GLS embedded waveguides and nano-scatterers

Guided optics spectrometers can be essentially classified into two main families: based on Fourier transform or dispersion. In the first case, an interferogram generated inside an optical waveguide and containing the spectral information is sampled using spatially distributed nanodetectors. These scatter quasi-non-perturbingly light into the detector that is in contact with the waveguide, helping to reconstruct the stationary wave. A dedicated FFT processing is needed in order to recover the spectrum with high resolution but limited spectral range. Another way is to directly disperse the different wavelengths to different pixels, either introducing differential optical path in the same propagation plane (multiple Mach-Zehnder interferometers or Arrayed Waveguides Gratings), or using a periodic structure to perpendicularly extract the optical signal confined in a waveguide (photonic crystals or surface gratings), and by means of a relay optics, generate the spectrum on the Fourier plane of the lens, where the detector is placed. Following this second approach, we present a laser-fabricated high-resolution compact dispersive spectro-interferometer (R>2500, 30nm spectral range at λ = 1560nm), using four parallel waveguides that can provide up to three non-redundant interferometric combinations. The device is based on guided optics technology embedded in bulk optical glass. Ultrafast laser photoinscription with 3D laser index engineering in bulk chalcogenide Gallium Lanthanium Sulfide glass is utilized to fabricate large mode area waveguides in an evanescently-coupled hexagonal multicore array configuration, followed by subsequent realization of nanoscaled scattering centers via one dimensional nanovoids across the waveguide, written in a non-diffractive Bessel configuration. A simple relay optics, with limited optical aberrations, reimages the diffracted signal on the focal plane array, leading to a robust, easy to align instrument.