Stable closed-loop fiber-optic delay of arbitrary radio-frequency waveforms

Distributed receiving system with local digitization and combination for SNR enhancement

We demonstrate an X-band distributed receiving system with 4 remote ends for signal-to-noise ratio (SNR) enhancement. The X-band analog signal received by 4 remote ends is first transmitted to the local end through optical fiber links and is then down-converted with a photonic method for digitization and further coherent combination. Finally, a combined signal with a higher SNR can be obtained. In the proposed system, a frequency-tunable single-tone signal is stably transmitted to the remote end for both down-converting the received signal and for generating a dithered sample clock to eliminate the transmission delay jitter with an unlimited compensation range. Experimentally, X-band binary phase shift keying signals are used for system performance evaluation. After 20 to 25 km transmission, the relative timing drifts between different links are at the order of picoseconds, and a near-theoretical SNR enhancement is achieved. The proposed scheme has a simple remote structure with no need for time synchronization, increasing its signal combining precision, flexibility, and scalability, making it an ideal candidate for long-distance weak signal detection.

Photonics-based wideband distributed coherent aperture radar system

A photonics-based wideband distributed coherent aperture radar (DCAR) system is proposed and experimentally demonstrated. In the proposed system, the central controlling system and several spatially dispersed remote transceivers are connected by the optical fiber-based time synchronization network. In the central controlling system, the optical-carried orthogonal/coherent linear frequency modulated waveforms (LFMWs) are generated by a reconfigurable multi-channel optical arbitrary waveform generator (RMOAWG), and the signal processing for the echo waves is also implemented there. While in the remote transceivers, only the optical/RF and RF/optical conversions are carried out. Benefitting from the use of photonics-based methods, bandwidths of the generated radar signals can be large, improving the detection resolution of the system. Due to the centralized signal generation and processing, the remote transceivers can be simplified, reducing the system complexity. Moreover, the fiber-based distribution ensures low loss, good transportability, and great flexibility. Experimentally, a two-unit DCAR system operating in X-band with a bandwidth of 3 GHz is presented. When full coherence is achieved, signal-to-noise ratio (SNR) gains of 8.3 dB and 8.33 dB are obtained over a single radar for radar 1 and radar 2, respectively. Results are in good agreement with theoretical prediction. Theoretically, with such SNR gain, the range detection precision can be improved to about 2.6 times that of a single radar.

Phase-Coded and Noise-Based Brillouin Optical Correlation-Domain Analysis

Correlation-domain analysis has enabled distributed measurements of Brillouin gain spectra along optical fibers with high spatial resolution, up to millimeter-scale. The method relies on the joint modulation of counter-propagating Brillouin pump and signal waves so that their complex envelopes are correlated in select positions only. Brillouin optical correlation-domain analysis was first proposed nearly 20 years ago based on frequency modulation of the two waves. This paper reviews two more recent variants of the concept. In the first, the Brillouin pump and signal waves are co-modulated by high-rate binary phase sequences. The scheme eliminates restricting trade-offs between the spatial resolution and the range of unambiguous measurements, and may also suppress noise due to residual Brillouin interactions outside the correlation peak. Sensor setups based on phase coding addressed 440,000 high-resolution points and showed potential for reaching over 2 million such points. The second approach relies on the amplified spontaneous emission of optical amplifiers, rather than the modulation of an optical carrier, as the source of Brillouin pump and signal waves. Noise-based correlation-domain analysis reaches sub-millimeter spatial resolution. The application of both techniques to tapered micro-fibers and planar waveguides is addressed as well.

Highly-coherent stimulated phonon oscillations in a multi-core optical fiber

Opto-mechanical oscillators that generate coherent acoustic waves are drawing much interest, in both fundamental research and applications. Narrowband oscillations can be obtained through the introduction of feedback to the acoustic wave. Most previous realizations of this concept, sometimes referred to as "phonon lasers", relied on radiation pressure and moving boundary effects in micro- or nano-structured media. Demonstrations in bulk crystals required cryogenic temperatures. In this work, stimulated emission of highly-coherent acoustic waves is achieved in a commercially-available multi-core fiber, at room temperature. The fiber is connected within an opto-electronic cavity loop. Pump light in one core is driving acoustic waves via electrostriction, whereas an optical probe wave at a different physical core undergoes photo-elastic modulation by the stimulated acoustic waves. Coupling between pump and probe is based entirely on inter-core, opto-mechanical cross-phase modulation: no direct optical feedback is provided. Single-frequency mechanical oscillations at hundreds of MHz frequencies are obtained, with side-mode suppression that is better than 55 dB. A sharp threshold and rapid collapse of the linewidth above threshold are observed. The linewidths of the acoustic oscillations are on the order of 100 Hz, orders of magnitude narrower than those of the pump and probe light sources. The relative Allan's deviation of the frequency is between 0.1-1 ppm. The frequency may be switched among several values by propagating the pump or probe waves in different cores. The results may be used in sensing, metrology and microwave-photonic information processing applications.

Brillouin Optical Correlation Domain Analysis in Composite Material Beams

Structural health monitoring is a critical requirement in many composites. Numerous monitoring strategies rely on measurements of temperature or strain (or both), however these are often restricted to point-sensing or to the coverage of small areas. Spatially-continuous data can be obtained with optical fiber sensors. In this work, we report high-resolution distributed Brillouin sensing over standard fibers that are embedded in composite structures. A phase-coded, Brillouin optical correlation domain analysis (B-OCDA) protocol was employed, with spatial resolution of 2 cm and sensitivity of 1 °K or 20 micro-strain. A portable measurement setup was designed and assembled on the premises of a composite structures manufacturer. The setup was successfully utilized in several structural health monitoring scenarios: (a) monitoring the production and curing of a composite beam over 60 h; (b) estimating the stiffness and Young's modulus of a composite beam; and (c) distributed strain measurements across the surfaces of a model wing of an unmanned aerial vehicle. The measurements are supported by the predictions of structural analysis calculations. The results illustrate the potential added values of high-resolution, distributed Brillouin sensing in the structural health monitoring of composites.

High-resolution Brillouin optical correlation domain analysis with no spectral scanning

Distributed Brillouin fiber sensors typically rely on the reconstruction of the steady-state Brillouin gain spectrum (BGS), through spectral scanning of the frequency offset between the pump and signal waves. In this work, we propose and demonstrate an alternative approach, in which the local Brillouin frequency shift (BFS) is extracted from temporal transient analysis of the step response of the amplified signal wave. Measurements are taken at only two arbitrary frequency offsets between pump and signal. No spectral scanning and no prior knowledge of a reference BGS are necessary. The principle is supported by analytic and numeric solutions of the differential equations of stimulated Brillouin scattering. The BFS of a 2 meters-long fiber under test was measured with 1 MHz accuracy and a dynamic range of 200 MHz. Transient measurements were also performed in a Brillouin optical correlation domain analysis (B-OCDA) experiment with 4 cm resolution, standard deviation of 2.4 MHz and 100 MHz dynamic range. A 4 cm-wide hot-spot was properly identified in the measurements. Multiple correlation peaks could be addressed in a single flight of a pump pulse. The results represent the first B-OCDA that is free of spectral scanning. This new measurement concept may be applicable to random-access distributed and dynamic monitoring of sound and vibration.