Sequentially timed all-optical mapping photography (STAMP) utilizing spectral filtering

Sequentially timed all-optical mapping photography with quantitative phase imaging capability

Sequentially timed all-optical mapping photography (STAMP) is considered a powerful tool to observe highly dynamic events; however, its application is significantly hindered by its incapability to acquire quantitative phase images. In this work, by integrating diffraction phase microscopy (DPM) and STAMP, we achieve ultrafast single-shot quantitative phase imaging with a frame rate of up to 3.3 trillion fps. The performance of the system is evaluated using a homemade phase module. Experimental results show that the system can accurately record the propagation of laser filamentation in air. We believe our method will greatly enhance the capability of STAMP to measure highly transparent targets.

Single-exposure multi-wavelength optical diffraction tomography based on space-angle dual multiplexing holography

We present a space-angle dual multiplexing holographic recording system for realizing single-exposure multi-wavelength optical diffraction tomographic (ODT) imaging. This system is achieved by combining the principle of single-exposure multi-wavelength holographic imaging technique based on angle-division multiplexing with the principle of single-exposure ODT imaging technique based on microlens array multi-angle illuminations and space-division multiplexing. Compared with the existing multi-wavelength ODT imaging methods, it enables the holographic recording of all the diffraction tomography information of a measured specimen at multiple illumination wavelengths in a single camera exposure without any scan mechanism. Using our proposed data processing method, the multi-wavelength three-dimensional (3D) refractive index tomograms of a specimen can be eventually reconstructed from single recorded multiplexing hologram. Experimental results of a static polystyrene bead and a living C. elegans worm demonstrate the feasibility of this system.

Design and Study of a Two-Dimensional (2D) All-Optical Spatial Mapping Module

Sequentially timed all-optical mapping photography is one of the main emerging ultra-fast detection technologies that can be widely applicable to ultra-fast detection at the picosecond level in fields such as materials and life sciences. We propose a new optical structure for an all-optical spatial mapping module that can control the optical field of two-dimensional imaging while improving spectral resolution and detector sensor utilization. The model of optical parameters based on geometrical optics theory for the given structure has been established, and the theoretical analysis of the inter-frame energy crosstalk caused by incident beam spot width, chromatic aberration, and main errors of the periscope array has been conducted. The optical design of the two-dimensional (2D) all-optical spatial mapping module was finally completed using ZEMAX OpticStudio 2018 software. The results show that our optical module can realize targets of 16 frames and 1.25 nm spectral resolution.

Arbitrary spectro-temporal pulse-shaping algorithm

Measurement applications in optical fields require arbitrary spectro-temporal pulse shaping. However, conventional pulse-shaping algorithms are limited to controlling only the shape of the temporal intensity waveform. To overcome this limitation, we introduce the concept of short-time Fourier transformation into the conventional iterative Fourier transform algorithm, enabling it to introduce spectro-temporal constraints using a spectrogram image as a target. We numerically demonstrate that the proposed algorithm can find an appropriate spectral phase modulation pattern to realize arbitrarily controlled spectro-temporal pulse waveforms by testing the algorithm with different spectro-temporal multi-pulse waveforms. The algorithm benefits from reducing computational costs for generating spectro-temporal waveforms.

Effect of fractional picosecond laser therapy using a diffractive optical lens on histological tissue reaction

BACKGROUND AND OBJECTIVES

Fractional ablative resurfacing techniques are preferred treatments for facial rejuvenation of aged skin. This study was performed to investigate the cutaneous effects of using a fractional picosecond laser at 1064 nm with a diffractive lens.

METHODS

The penetration depth according to the location of the handpiece tip was evaluated using an acrylic panel. Laser induced optical breakdown (LIOB) and cutaneous damage were observed after hematoxylin and eosin staining in guinea pigs. Collagen formation was evaluated using Victoria staining, Masson's trichrome (MT) staining, and immunohistochemical staining for collagen type III.

RESULTS

The penetration depth for LEVEL 1 was 499.98-935.23 μm (average: 668.75 ± 182.84 μm); the LIOB cavity area was 1664.17 ± 650.52 μm2. The penetration depth of LEVEL 2 was 257.12-287.38 μm (average: 269.77 ± 14.55 μm) with an LIOB cavity area of 1335.85 ± 214.41 μm2. At LEVEL 3, that was 36.17-53.69 μm (average: 52.15 ± 20.81 μm) and the LIOB cavity area was 1312.67 ± 1069.12 μm2. No epidermal tissue damage was observed and collagen formation was observed from day 14 under all conditions.

CONCLUSION

Diffractive optical element (DOE) lens arranged laser treatment system controlled the position of LIOB occurrence and an irradiating area.

Single-shot optical imaging with spectrum circuit bridging timescales in high-speed photography

Single-shot optical imaging based on ultrashort lasers has revealed nonrepetitive processes in subnanosecond timescales beyond the recording range of conventional high-speed cameras. However, nanosecond photography without sacrificing short exposure time and image quality is still missing because of the gap in recordable timescales between ultrafast optical imaging and high-speed electronic cameras. Here, we demonstrate nanosecond photography and ultrawide time-range high-speed photography using a spectrum circuit that produces interval-tunable pulse trains while keeping short pulse durations. We capture a shock wave propagating through a biological cell with a 1.5-ns frame interval and 44-ps exposure time while suppressing image blur. Furthermore, we observe femtosecond laser processing over multiple timescales (25-ps, 2.0-ns, and 1-ms frame intervals), showing that the plasma generated at the picosecond timescale affects subsequent shock wave formation at the nanosecond timescale. Our technique contributes to accumulating data of various fast processes for analysis and to analyzing multi-timescale phenomena as a series of physical processes.

Single-shot videography with multiplex structured illumination using an interferometer

Frequency recognition algorithm for multiple exposures (FRAME) is a high-speed videography technique that exposes a dynamic object to time-varying structured illumination (SI) and captures two-dimensional transients in a single shot. Conventional FRAME requires light splitting to increase the number of frames per shot, thereby resulting in optical loss and a limited number of frames per shot. Here, we propose and demonstrate a novel FRAME method which overcomes these problems by utilizing an interferometer to generate a time-varying SI without light splitting. Combining this method with a pulsed laser enables low-cost, high-speed videography on a variety of timescales from microseconds.

Single-Shot Multi-Frame Imaging of Femtosecond Laser-Induced Plasma Propagation

Single-shot ultrafast multi-frame imaging technology plays a crucial role in the observation of laser-induced plasma. However, there are many challenges in the application of laser processing, such as technology fusion and imaging stability. To provide a stable and reliable observation method, we propose an ultrafast single-shot multi-frame imaging technology based on wavelength polarization multiplexing. Through the frequency doubling and birefringence effects of the BBO and the quartz crystal, the 800 nm femtosecond laser pulse was frequency doubled to 400 nm, and a sequence of probe sub-pulses with dual-wavelength and different polarization was generated. The coaxial propagation and framing imaging of multi-frequency pulses provided stable imaging quality and clarity, as well as high temporal/spatial resolution (200 fs and 228 lp/mm). In the experiments involving femtosecond laser-induced plasma propagation, the probe sub-pulses measured their time intervals by capturing the same results. Specifically, the measured time intervals were 200 fs between the same color pulses and 1 ps between the adjacent different. Finally, based on the obtained system time resolution, we observed and revealed the evolution mechanism of femtosecond laser-induced air plasma filaments, the multifilament propagation of femtosecond laser in fused silica, and the influence mechanism of air ionization on laser-induced shock waves.

Investigation of single-shot high-speed photography based on spatial frequency multiplexing

The frequency recognition algorithm for multiple exposures (FRAME) is a spatial frequency multiplexing method that enables high-speed videography with high spatial resolution across a wide field of view and high temporal resolution up to femtoseconds. The criterion to design encoded illumination pulses is an essential factor that affects the sequence depth and reconstruction accuracy of FRAME but was not previously discussed. When the spatial frequency is exceeded, the fringes on digital imaging sensors can become distorted. To exploit the Fourier domain for FRAME with deep sequences and avoid fringe distortion, the maximum Fourier map for sequence arrangement was determined to be a diamond shape. The maximum axial frequency should be a quarter of the sampling frequency of digital imaging sensors. Based on this criterion, the performances of reconstructed frames were theoretically investigated by considering arrangement and filtering methods. To ensure optimal and uniform interframe quality, the frames near the zero frequency should be removed and optimized super-Gaussian filters should be employed. Experiments were conducted flexibly with a digital mirror device to generate illumination fringes. Following these suggestions, the movement of a water drip dropping on a water surface was captured with 20 and 38 frames with uniform interframe quality. The results prove the effectiveness of the proposed methods to improve the reconstruction accuracy and promote the development of FRAME with deep sequences.

Multiple motion picture recording in light-in-flight recording by holography with an angular multiplexing technique

Light-in-flight recording by holography (LIF holography) is an ultrafast imaging technique for recording light pulse propagation as a motion picture. In this study, we propose and demonstrate multiple motion picture recordings of light pulse propagation by use of LIF holography with angular multiplexing. We set incident angles of reference light pulses to remove the difficulty in adjusting the optical path length difference between an object light pulse and reference light pulses and the complexity of the optical system. In the experiment, by using LIF holography with angular multiplexing, we succeeded in recording a propagating light pulse as two motion pictures with durations of 129.6 ps without an inseparable superimposition of the reconstructed images. In addition, cross talk between the recorded images, noise caused by cross-terms in an image plane, and the number of motion pictures that can be recorded are discussed.

Simple system for realizing single-shot ultrafast sequential imaging based on spatial multiplexing in-line holography

We present a simple system for realizing single-shot ultrafast sequential imaging based on spatial multiplexing in-line holography. In this system, we propose to combine a specially designed mini-reflector delay-line array with digital in-line holography. The former including a group of adjustable mini-reflectors can easily generate an array of probe sub-pulses that can be controlled independently in the propagation direction and time delays. The object beams formed by the different sub-pulses will propagate and fall on different recording regions of the image sensor to generate a single-shot spatial-multiplexing in-line hologram. The geometry of the digital in-line holography can simplify the complexity of the system and enable complex amplitude imaging. In addition, the time resolution of this system is limited only by the pulse duration, which allows this system to study the dynamic processes with the femtosecond order. In an experiment about the laser-induced air plasma, our proposed system achieves nine frames sequential holographic images with the frame rate of 7.5 trillion frames per second (Tfps).

Hybrid-plane spectrum slicing for sequentially timed all-optical mapping photography

Sequentially timed all-optical mapping photography (STAMP) is an effective tool for observing ultrafast and non-repetitive events. In the classical design of STAMP, the spatial resolution of the acquired images is different in two directions, severely limiting the scalability of STAMP. Here, by introducing an asymmetric optical design, we make the slicing mirror locate in the hybrid plane of the system, i.e., the image plane in the direction of the short edge, while the Fourier plane is in the direction of the long edge. This avoids the loss of the high-frequency components of the images and hence offers the possibility to further extend the frame number of the system.

FISI: frequency domain integration sequential imaging at 1.26×1013 frames per second and 108 lines per millimeter

High spatial resolution on the image plane (intrinsic spatial resolution) has always been a problem for ultrafast imaging. Single-shot ultrafast imaging methods can achieve high spatial resolution on the object plane through amplification systems but with low intrinsic spatial resolutions. We present frequency domain integration sequential imaging (FISI), which encodes a transient dynamic by an inversed 4f (IFF) system and decodes it using optical spatial frequencies recognition (OFR), which overcomes the limitation of the spatial frequencies recognition algorithm. In an experiment on the process of an air plasma channel, FISI achieved shadow imaging of the channel with a framing rate of 1.26×10¹³ fps and an intrinsic spatial resolution of 108 lp/mm (the spatial resolution on the image plane). Owing to its excellent framing time and high intrinsic spatial resolution, FISI can probe both repeatable and unrepeatable ultrafast phenomena, such as laser-induced damage, plasma physics, and shockwave interactions in living cells with high quality.

Lensless ultrafast optical imaging

Lensless single-shot ultrafast optical imaging is realized by integrating an acousto-optic programmable dispersive filter with spectrally filtered sequentially time all-optical mapping photography, which enables independent control of frame rate, frame intensity, and exposure time with a simple system design.

Acousto-optically driven lensless single-shot ultrafast optical imaging

Driven by many applications in a wide span of scientific fields, a myriad of advanced ultrafast imaging techniques have emerged in the last decade, featuring record-high imaging speeds above a trillion-frame-per-second with long sequence depths. Although bringing remarkable insights into various ultrafast phenomena, their application out of a laboratory environment is however limited in most cases, either by the cost, complexity of the operation or by heavy data processing. We then report a versatile single-shot imaging technique combining sequentially timed all-optical mapping photography (STAMP) with acousto-optics programmable dispersive filtering (AOPDF) and digital in-line holography (DIH). On the one hand, a high degree of simplicity is reached through the AOPDF, which enables full control over the acquisition parameters via an electrically driven phase and amplitude spectro-temporal tailoring of the imaging pulses. Here, contrary to most single-shot techniques, the frame rate, exposure time, and frame intensities can be independently adjusted in a wide range of pulse durations and chirp values without resorting to complex shaping stages, making the system remarkably agile and user-friendly. On the other hand, the use of DIH, which does not require any reference beam, allows to achieve an even higher technical simplicity by allowing its lensless operation but also for reconstructing the object on a wide depth of field, contrary to classical techniques that only provide images in a single plane. The imaging speed of the system as well as its flexibility are demonstrated by visualizing ultrashort events on both the picosecond and nanosecond timescales. The virtues and limitations as well as the potential improvements of this on-demand ultrafast imaging method are critically discussed.

All-optical high spatial-temporal resolution photography with raster principle at 2 trillion frames per second

A novel single-shot ultrafast all-optical photography with raster principle (OPR) that can capture real-time imaging of ultrafast phenomena is proposed and demonstrated. It consists of a sequentially timed module (STM), spectral-shaping module (SSM), and raster framing camera (RFC). STM and SSM are used for linearly encoding frequency-time mapping and system calibration, respectively. The function of the RFC is sampling the target by microlens arrays and framing on the basis of frequency-time-spatial positions conversion. We demonstrated the recording of transient scenes with the spatial resolution of ∼90lp/mm, the frame number of 12 and the frame rate of 2 trillion frames per second (Tfps) in single-shot. Thanks to its high spatial-temporal resolution, high frame rate (maximum up to 10 Tfps or more) and sufficient frame number, our OPR can observe the dynamic processes with complex spatial structure at the atomic time scale (10 fs∼1ps), which is promising for application in plasma physics, shock waves in laser-induced damage, and dynamics of condensed matter materials.

Single-shot compressed ultrafast photography based on U-net network

The compressive ultrafast photography (CUP) has achieved real-time femtosecond imaging based on the compressive-sensing methods. However, the reconstruction performance usually suffers from artifacts brought by strong noise, aberration, and distortion, which prevents its applications. We propose a deep compressive ultrafast photography (DeepCUP) method. Various numerical simulations have been demonstrated on both the MNIST and UCF-101 datasets and compared with other state-of-the-art algorithms. The result shows that our DeepCUP has a superior performance in both PSNR and SSIM compared to previous compressed-sensing methods. We also illustrate the outstanding performance of the proposed method under system errors and noise in comparison to other methods.

All-optical modulation and detection using a gain medium in a pulse shaper

We demonstrate all-optical modulation and ultrafast detection using an on-resonance optical gain medium, combined with spectral splitting in a Fourier transform pulse shaper. Multiple spectral channels of one optical beam can be independently modulated in time by another beam, allowing high-rate modulation and multiplexing without requiring ultrafast response from the gain medium. For detection of sub-picosecond signals we demonstrate a method of ultrafast signal detection (temporal imaging with no spatial resolution) that utilizes the spatio-temporal tilt of an optical pulse in a pulse shaper. The proposed methods can find applications in optical information technology and ultrafast imaging.

Sequentially timed all-optical mapping photography boosted by a branched 4f system with a slicing mirror

We present sequentially timed all-optical mapping photography (STAMP) with a slicing mirror in a branched 4f system for an increased number of frames without sacrificing pixel resolution. The branched 4f system spectrally separates the laser light path into multiple paths by the slicing mirror placed in the Fourier plane. Fabricated by an ultra-precision end milling process, the slicing mirror has 18 mirror facets of differing mirror angles. We used the boosted STAMP to observe dynamics of laser ablation with two image sensors which captured 18 subsequent frames at a frame rate of 126 billion frames per second, demonstrating this technique's potential for imaging unexplored ultrafast non-repetitive phenomena.

Single-shot ultrafast burst imaging using an integral field spectroscope with a microlens array

To fully utilize the functions of a center-wavelength-sweeping pulse train generated by a free-space angular-chirp-enhanced delay optical layout for a probe laser pulse in sequentially timed all-optical mapping photography (STAMP), we introduced an integral field spectroscopy (IFS) method using a microlens array (MLA) to produce hyperspectral images, referring to the technique as lens array (LA)-STAMP. Compared with the previous STAMP utilizing spectral filtering where a bandpass filter generated hyperspectral images, LA-STAMP achieved much higher optical throughput. In a prototype setup, we used a 60×60 MLA and demonstrated single-shot burst imaging of a femtosecond laser-induced ablation process on a glass surface with 300 ps frame intervals in a 1.8 ns time window. Each frame image was constructed by assembling spectrally dispersed 36×36 monochromatic segments distributed by each lenslet on 5×5 pixels of a CCD camera. The spatial resolution was ∼4.4µm, which was determined by the MLA's pitch and the magnification of the microscope lens. We limited the number of frames to seven in this prototype setup, although it can be scaled to ∼24 with a spatial resolution of ∼1µm by designing IFS with a fine pitch MLA.

Extension of time window into nanoseconds in single-shot ultrafast burst imaging by spectrally sweeping pulses

We achieved single-shot 2D-burst imaging with a ∼22ps temporal resolution in a nanosecond time window using sequentially timed all-optical mapping photography with a spectral filtering (SF-STAMP) scheme, where a single snapshot of spectral images measured with a linear frequency chirped laser pulse forms time-resolved snapshots. We combined a pulse-stretching scheme of a free-space angular-chirp-enhanced delay (FACED) composed of a pair of tilted mirrors and a 4f-system. With a 4f-FACED system, we generated collinearly propagating burst laser pulses with a different center wavelength and a tunable time interval and demonstrated single-shot burst imaging with a 303 ps interval in a 1.5 ns time window by an SF-STAMP with spectrally sweeping probe pulses.

Energy adjustment pulse shaping algorithm part I: accuracy improvement of phase retrieval IFTA

Techniques to generate a targeted temporal waveform with high accuracy are desirable to extend the application range for pulse shapers. In this study, a target energy adjustment mechanism is applied to the input-output iterative Fourier transform algorithm (IFTA). It is numerically demonstrated that, considering multi-pulse temporal waveforms, the developed algorithm provides a suitable spectral phase modulation pattern and improves the shape of the temporal waveform compared to that of the input-output IFTA.

Energy adjustment pulse shaping algorithm part II: realization of a spectral intensity design

An accurately controlled arbitrary temporal waveform is required for many applications. To realize accurate pulse shaping, many optimization algorithms have been proposed to design spectral phase modulation patterns. However, as far as the authors know, no intensity optimization algorithm has been proposed. Therefore, in this paper, an algorithm is proposed to design an optimal spectral intensity modulation pattern for shaping short laser pulses. Consequently, it is numerically demonstrated that the proposed algorithm provides suitable spectral intensity modulation patterns, which create more accurate shapes of temporal waveform than those of spectral phase-only modulation.

Single-shot imaging of microscopic dynamic scenes at 5 THz frame rates by time and spatial frequency multiplexing

Femtosecond-scale ultrafast imaging is an essential tool for visualizing ultrafast dynamics in many scientific fields. We present a single-shot ultrafast microscopy that can capture more than a dozen frames at a time with the frame rate of 5 THz. We combine a spatial light modulator and a custom-made echelon for efficiently generating a large number of reference pulses with designed time delays and propagation angles. The single-shot recording of the interference image between these reference pulses with a sample pulse allows us to retrieve the stroboscopic images of the dynamic scene at the timing of the reference pulses. We demonstrated the recording of 14 temporal snapshots at a time, which is the largest to date, with the optimal temporal resolution set by the laser output pulse. This will have profound impacts on uncovering the interesting spatio-temporal dynamics yet to be explored.

Single-shot ultrafast sequential holographic imaging with high temporal resolution and a large field of view

A compact system for single-shot sequential holographic imaging (SSSHI) with high temporal resolution and a large field of view is proposed. In this system, a specially designed sequence pulse train generator with a group of diffractive gratings inserted is adopted to simultaneously generate the probe pulse train and the reference pulse train required for recording a single-shot spatial frequency division multiplexing hologram. The system successfully overcomes the walk-off effect of the ultrashort pulse laser in SSSHI and, hence, effectively avoids the influence of the short coherence of ultrashort pulses on the spatial resolution (or field of view) of SSSHI; the complexity of the system and the difficulty in the precise synchronous alignment of the probe and the reference pulses also can be greatly reduced. An experimental setup of the system was constructed, and a SSSHI of dynamical air plasmas induced by a femtosecond pulse laser is successfully realized.

Compressed Ultrafast Spectral-Temporal Photography

Acquiring ultrafast and high spectral resolution optical images is key to measure transient physical or chemical processes, such as photon propagation, plasma dynamics, and femtosecond chemical reactions. At a trillion Hz frame rate, most ultrafast imaging modalities can acquire only a limited number of frames. Here, we present a compressed ultrafast spectral-temporal (CUST) photographic technique, enabling both an ultrahigh frame rate of 3.85 trillion Hz and a large frame number. We demonstrate that CUST photography records 60 frames, enabling precisely recording light propagation, reflection, and self-focusing in nonlinear media over 30 ps. CUST photography has the potential to further increase the frame number beyond hundreds of frames. Using spectral-temporal coupling, CUST photography can record multiple frames with a subnanometer spectral resolution with a single laser exposure, enabling ultrafast spectral imaging. CUST photography with high frame rate, high spectral resolution, and high frame number in a single modality offer a new tool for observing many transient phenomena with high temporal complexity and high spectral precision.

A trillion frames per second: the techniques and applications of light-in-flight photography

Cameras capable of capturing videos at a trillion frames per second allow to freeze light in motion, a very counterintuitive capability when related to our everyday experience in which light appears to travel instantaneously. By combining this capability with computational imaging techniques, new imaging opportunities emerge such as 3D imaging of scenes that are hidden behind a corner, the study of relativistic distortion effects, imaging through diffusive media and imaging of ultrafast optical processes such as laser ablation, supercontinuum and plasma generation. We provide an overview of the main techniques that have been developed for ultra-high speed photography with a particular focus on 'light-in-flight' imaging, i.e. applications where the key element is the imaging of light itself at frame rates that allow to freeze its motion and therefore extract information that would otherwise be blurred out and lost.

Single-shot ultrafast optical imaging

Single-shot ultrafast optical imaging can capture two-dimensional transient scenes in the optical spectral range at ≥100 million frames per second. This rapidly evolving field surpasses conventional pump-probe methods by possessing the real-time imaging capability, which is indispensable for recording non-repeatable and difficult-to-reproduce events and for understanding physical, chemical, and biological mechanisms. In this mini-review, we survey comprehensively the state-of-the-art single-shot ultrafast optical imaging. Based on the illumination requirement, we categorized the field into active-detection and passive-detection domains. Depending on the specific image acquisition and reconstruction strategies, these two categories are further divided into a total of six sub-categories. Under each sub-category, we describe operating principles, present representative cutting-edge techniques with a particular emphasis on their methodology and applications, and discuss their advantages and challenges. Finally, we envision prospects of technical advancement in this field.

Ultrafast all-optical solid-state framing camera with picosecond temporal resolution

A new ultrafast all-optical solid-state framing camera (UASFC) capable of single-shot ultrafast imaging is proposed and experimentally demonstrated. It is composed of an ultrafast semiconductor chip (USC), an optical time-series system (TSS), and a spatial mapping device (SMD) with an USC to transform signal beam information to the probe beam, a TSS to convert the time axis to wavelength-polarization, and a SMD to map wavelength-polarization image to different spatial positions. In our recent proof-of-principle experiment, better performance than ever of this technique is confirmed by giving six frames with ~3 ps temporal resolution and ~30 lp/mm spatial resolution.

Ultrafast single-shot measurement of optical Kerr effect based on supercontinuum pulse

We present an ultrafast single-shot measurement method for the optical Kerr effect based on a polarization gating technique. The advantages of this single-shot technique are demonstrated via a 26-ps chirped supercontinuum pulse used to measure the optical Kerr effect for three transparent organic liquids. The single-shot measurement results agree well with those of the time-resolved optical Kerr gate method, as regards both time and intensity. This method facilitates real-time observation of ultrafast optical Kerr responses of samples and simultaneous high-time-resolution data acquisition at ∼260 fs. We demonstrate that the single-shot measurement method is potentially a powerful tool for investigating the optical Kerr effects of unstable samples, and for application to high-power laser systems.