Color holographic display with white light LED source and single phase only SLM

Dual light source compensation method for improving the quality of LC-SLM holographic displays

The inherent "grid" effect of LC-SLM in holographic displays can lead to issues such as the presence of zero-order spots and multi-level diffraction images, resulting in a decrease in the quality of reconstructed images. In this Letter, a dual light source compensation method is proposed to address this problem. By analyzing the influence of the LC-SLM "grid" effect on the diffraction field and the rule of change of light intensity distribution and position of the reconstructed image, the dual light source is introduced on the basis of the rule of change of energy distribution at the symmetric position of the reconstructed image so as to compensate for the quality of the display results. The results show that the method not only avoids the influence of zero-order spot and multi-level diffraction image on the holographic display results but also especially highlights that the uniformity of light energy distribution of the reconstructed image is greatly improved, which provides a reference for LC-SLM to perform a higher-quality holographic display.

Multiplexed digital volume reflection holograms generated from digital transmission holograms

Interference from co-propagation of the object and reference beams can be digitally recorded for a digital transmission hologram (DTH). Volume holograms, as in display holography, which have been traditionally recorded in bulk photopolymer or photorefractive materials using a counter-propagating object and writing beams, are read out using multispectral light and offer the advantage of excellent wavelength selectivity. In this work, the reconstruction from a single digital volume reflection hologram (DVRH) and wavelength multiplexed DVRHs derived from respective single and multi-wavelength DTHs is investigated, using coupled wave theory and an angular spectral approach. The dependence of the diffraction efficiency on volume grating thickness, wavelength, and incident angle of the reading beam is studied.

Miniaturization and image optimization of a full-color holographic display system using a vibrating light guide

In this study, a miniaturized full-color holographic reconstruction system that uses a single spatial light modulator to achieve full-color image reconstruction was developed. The reconstruction system uses a single light guide for light combination and is therefore less voluminous than conventional reconstruction systems. The experimental results demonstrated that the system had a full-color display, corrected light combination, and eliminated zero-order light. The vibrations of the light guide disrupted the temporal coherence of the laser beam, thus ensuring that the speckle in the reconstructed image was almost imperceptible to the human eye.

Practical method for dynamic color holographic display

A practical method for dynamic color holographic display by using a computer-generated hologram (CGH) with a high space-bandwidth product is proposed, and a dynamic color holographic display system is designed by a space-division method. First, three primary color CGHs of different frames from a color movie are fabricated on holographic recording material by a self-made CGH microfilming system. Secondly, the CGH is fixed on an X-Y moving stage, which is controlled by the system in order to bring the CGH to the appointed position. Thirdly, three primary color lasers are used to reconstruct the CGH. The switch of the lasers is controlled by the system synchronous with the X-Y moving stage. The color video with high quality can be obtained after filtering the three primary color reconstructed wavefronts. The experimental results demonstrate that the proposed dynamic color holographic display method is effective. It has practical application value in high-quality CGH display.

Increased phase precision of spatial light modulators using irrational slopes: application to attosecond metrology

The ability of spatial light modulators (SLMs) to modify the amplitude and phase of light has proved them invaluable to the optics and photonics community. In many applications, the bit-depth of SLMs is a major limiting factor dictated by a digital processor. As a result, there is usually a compromise between refresh speed and bit-depth. Here, we present a method to increase the effective bit-depth of SLMs, which utilizes a linear slope, as is commonly applied to deal with the zeroth-order effect. This technique was tested using two interferometric transient absorption spectroscopy setups. Through the high harmonic generation in gases producing a train of attosecond pulses and harmonics from solids in the ultraviolet, two pulses are generated that interfere in the far field providing a measurement of the optical phase. An increase in the precision far beyond the limit dictated by the digital processor in the bit-depth was found.

Review of computer-generated hologram algorithms for color dynamic holographic three-dimensional display

Holographic three-dimensional display is an important display technique because it can provide all depth information of a real or virtual scene without any special eyewear. In recent years, with the development of computer and optoelectronic technology, computer-generated holograms have attracted extensive attention and developed as the most promising method to realize holographic display. However, some bottlenecks still restrict the development of computer-generated holograms, such as heavy computation burden, low image quality, and the complicated system of color holographic display. To overcome these problems, numerous algorithms have been investigated with the aim of color dynamic holographic three-dimensional display. In this review, we will explain the essence of various computer-generated hologram algorithms and provide some insights for future research.

Optimal Spatial Coherence of a Light-Emitting Diode in a Digital Holographic Display

The coherence of a light source is a vital aspect regarding the image quality of holographic contents. Generally, the coherence of the light source is the reason for speckle noise in a holographic display, which degrades the image quality. To reduce the speckle noise, partially coherent light sources such as light-emitting diodes (LED) have been studied. However, if the coherence of the light source is too low, the reconstructed image will blur. Therefore, using a spatial filter to improve the spatial coherence of LEDs has been proposed. In this study, we analyze the effect of the spatial and temporal coherence of the LED light source in a digital holographic display, and the optimal spatial coherence is determined. For this purpose, we devised an optical structure to control the spatial coherence in a holographic display system using a digital micro-mirror device (DMD). Here, the DMD functions as a dynamic spatial filter. By evaluating the change in the holographic image quality according to the spatial filter size, we obtained an optimal spatial filter size of 270 µm in our system. The proposed method is expected to be useful for selecting the optimal coherence of the light source for holographic displays.

High-contrast, speckle-free, true 3D holography via binary CGH optimization

Holography is a promising approach to implement the three-dimensional (3D) projection beyond the present two-dimensional technology. True 3D holography requires abilities of arbitrary 3D volume projection with high-axial resolution and independent control of all 3D voxels. However, it has been challenging to implement the true 3D holography with high-reconstruction quality due to the speckle. Here, we propose the practical solution to realize speckle-free, high-contrast, true 3D holography by combining random-phase, temporal multiplexing, binary holography, and binary optimization. We adopt the random phase for the true 3D implementation to achieve the maximum axial resolution with fully independent control of the 3D voxels. We develop the high-performance binary hologram optimization framework to minimize the binary quantization noise, which provides accurate and high-contrast reconstructions for 2D as well as 3D cases. Utilizing the fast operation of binary modulation, the full-color high-framerate holographic video projection is realized while the speckle noise of random phase is overcome by temporal multiplexing. Our high-quality true 3D holography is experimentally verified by projecting multiple arbitrary dense images simultaneously. The proposed method can be adopted in various applications of holography, where we show additional demonstration that realistic true 3D hologram in VR and AR near-eye displays. The realization will open a new path towards the next generation of holography.

Sub-millisecond switching of multi-level liquid crystal on silicon spatial light modulators for increased information bandwidth

Sub-millisecond response time with a refresh rate higher than 2000 frames per second (fps) and no degradation of the contrast ratio or diffraction efficiency is demonstrated in working liquid crystal on silicon (LCOS) spatial light modulators (SLMs) with 8-bit grey levels of amplitude and phase modulations. This makes possible to achieve an information bandwidth of about 190 Gb s^-1 with a 4k LCOS operating at 10-bit phase modulation levels. The normalised contrast stays at almost the unit level for a frame rate up to 1700 fps and at higher than 0.9 for 2500 fps. The diffraction efficiency stays above -1.0 dB for a frame rate up to 2400 fps. Such a fast response allows us to eliminate image blurring in replaying a fast movie.

Single-shot digital multiplexed holography for the measurement of deep shapes

This work develops a single-shot holographic profilometer that enables shape characterization of discontinuous deep surfaces. This is achieved by combining hologram frequency multiplexing and an illumination technique of complex amplitude in multi-incidence angle profilometer. Object illumination is carried out from seven directions simultaneously, where the radial angular coordinates of illumination plane waves obey the geometric series. It is shown that: (i) the illumination pattern provides the required frequency separation of all object wavefronts in transverse frequency space, which is necessary for hologram demultiplexing, and (ii) numerical generation of longitudinal scanning function (LSF) is possible, which has large measurement range, high axial resolution, and small side lobes. Low side lobes of LSF and the developed multiplexed field dependent aberration compensation method are essential to minimize the negative influence of speckle noise of single-shot capture on the measurement result. The utility of the proposed method is demonstrated with experimental measurement of heights of two step-like objects.

Multicolor Holographic Display of 3D Scenes Using Referenceless Phase Holography (RELPH)

In this paper, we present a multicolor display via referenceless phase holography (RELPH). RELPH permits the display of full optical wave fields (amplitude and phase) using two liquid crystal phase-only spatial light modulators in a Michelson-interferometer-based arrangement. Complex wave fields corresponding to arbitrary real or artificial 3D scenes are decomposed into two mutually coherent wave fields of constant amplitude whose phase distributions are modulated onto the wave fields reflected by the respective light modulators. Here, we present the realization of that concept in two different ways: firstly, via temporal multiplexing using a single setup, switching between wavelengths for temporal integration of the respective wavefields; secondly, using spatial multiplexing of different wavelengths with multiple Michelson-based setups; and finally, we present an approach to magnify the 3D scenes displayed by light modulators with limited space–bandwidth product for a comfortable viewing experience.

An interactive holographic projection system that uses a hand-drawn interface with a consumer CPU

Holography is a promising technology for photo-realistic three-dimensional (3D) displays because of its ability to replay the light reflected from an object using a spatial light modulator (SLM). However, the enormous computational requirements for calculating computer-generated holograms (CGHs)—which are displayed on an SLM as a diffraction pattern—are a significant problem for practical uses (e.g., for interactive 3D displays for remote navigation systems). Here, we demonstrate an interactive 3D display system using electro-holography that can operate with a consumer’s CPU. The proposed system integrates an efficient and fast CGH computation algorithm for line-drawn 3D objects with inter-frame differencing, so that the trajectory of a line-drawn object that is handwritten on a drawing tablet can be played back interactively using only the CPU. In this system, we used an SLM with 1,920 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\times $$\end{document}× 1,080 pixels and a pixel pitch of 8 μm × 8 μm, a drawing tablet as an interface, and an Intel Core i9–9900K 3.60 GHz CPU. Numerical and optical experiments using a dataset of handwritten inputs show that the proposed system is capable of reproducing handwritten 3D images in real time with sufficient interactivity and image quality.

StainedView: Variable-Intensity Light-Attenuation Display with Cascaded Spatial Color Filtering for Improved Color Fidelity

We present StainedView, an optical see-through display that spatially filters the spectral distribution of light to form an image with improved color fidelity. Existing light-attenuation displays have limited color fidelity and contrast, resulting in a degraded appearance of virtual images. To use these displays to present virtual images that are more consistent with the real world, we require three things: intensity modulation of incoming light, spatial color filtering with narrower bandwidth, and appropriate light modulation for incoming light with an arbitrary spectral distribution. In StainedView, we address the three requirements by cascading two phase-only spatial light modulators (PSLMs), a digital micromirror device, and polarization optics to control both light intensity and spectrum distribution. We show that our design has a 1.8 times wider color gamut fidelity (75.8% fulfillment of sRGB color space) compared to the existing single-PSLM approach (41.4%) under a reference white light. We demonstrated the design with a proof-of-concept display system. We further introduce our optics design and pixel-selection algorithm for the given light input, evaluate the spatial color filter, and discuss the limitation of the current prototype.

Compact full-color holographic 3-D display based on undersampled computer-generated holograms and oblique projection imaging

A compact full-color electro-holographic three-dimensional (3-D) display with undersampled computer-generated holograms (US-CGHs) and oblique projection imaging (OPI) is proposed. For its realization, undersampling conditions of the CGH enabling the complete recovery of image information are derived, and the OPI-based longitudinal-to-lateral depth conversion (LTL-DC) scheme allowing the simple reconstruction of full-color images is also proposed. Three-color off-axis US-CGHs are generated with their center-shifted principle fringe patterns (CS-PFPs) of the novel look-up table (NLUT) method, where center-shifts are calculated with the derived undersampling conditions of the CGH based on the generalized sampling theorem, and then multiplexed into the color-multiplexed hologram (CMH). The CMH is loaded on a SLM (spatial light modulator) and reconstructed by being illuminated with a multi-wavelength light source, where an original full-color image is reconstructed being spatially separated from the other color-dispersed images on the projected image plane with the OPI-based LTL-DC process, which enables us to view the original full-color image just with a simple filter mask. Performance analysis and successful experiments with the test 3-D objects in motion confirm the feasibility of the proposed system.

Toward the next-generation VR/AR optics: a review of holographic near-eye displays from a human-centric perspective

Wearable near-eye displays for virtual and augmented reality (VR/AR) have seen enormous growth in recent years. While researchers are exploiting a plethora of techniques to create life-like three-dimensional (3D) objects, there is a lack of awareness of the role of human perception in guiding the hardware development. An ultimate VR/AR headset must integrate the display, sensors, and processors in a compact enclosure that people can comfortably wear for a long time while allowing a superior immersion experience and user-friendly human-computer interaction. Compared with other 3D displays, the holographic display has unique advantages in providing natural depth cues and correcting eye aberrations. Therefore, it holds great promise to be the enabling technology for next-generation VR/AR devices. In this review, we survey the recent progress in holographic near-eye displays from the human-centric perspective.

Light source optimization for partially coherent holographic displays with consideration of speckle contrast, resolution, and depth of field

Speckle reduction is an important topic in holographic displays as speckles not only reduce signal-to-noise ratio but also possess an eye-safety issue. Despite thorough exploration of speckle reduction methods using partially coherent light sources, the trade-off involved by the partial coherence has not been thoroughly discussed. Here, we introduce theoretical models that quantify the effects of partial coherence on the resolution and the speckle contrast. The theoretical models allow us to find an optimal light source that maximizes the speckle reduction while minimizing the decline of the other terms. We implement benchtop prototypes of partially coherent holographic displays using the optimal light source, and verify the theoretical models via simulation and experiment. We also present a criterion to evaluate the depth of field in partially coherent holographic displays. We conclude with a discussion about approximations and limitations inherent in the theoretical models.

Speckle reduced holographic displays using tomographic synthesis

Despite significant merit of depth representation, holographic displays have a considerable limitation: speckle. Here, we present speckle reduced holographic displays using an engineered light source with angle diversity for speckle reduction. The level of angle diversity is optimized with consideration of resolution, speckle contrast, and depth of field. To extend the depth of field sacrificed for speckle reduction, we apply tomographic synthesis, exploiting synchronization of a local illumination module and a tunable-focus lens. We implement a benchtop prototype to verify the proposed method, which reduces the speckle contrast averagely by 37.8% while preserving resolution and 4.0 diopter depth of field.

Single-shot in-line Fresnel incoherent holography using a dual-focus checkerboard lens

Fresnel incoherent correlation holography (FINCH) is a technology that can acquire three-dimensional information of incoherent objects such as fluorescence with an in-line optical system. However, it is difficult to apply FINCH to dynamic phenomena, since FINCH has to detect phase-shifted holograms sequentially to eliminate twin and zero-order images. In this paper, a method in which the phase-shifted holograms can be obtained simultaneously with an in-line setup by using an optimized simulated diffraction optical element (sDOE), realized by a phase-only spatial light modulator, is proposed. The optimized sDOE is an optical device with a dual-focus lens, 2D grating, and spatial phase shifter. Therefore, the sDOE is called a dual-focus checkerboard lens. The optical experiment confirms the feasibility of the proposed method.

Astigmatism correction and quality optimization of computer-generated holograms for holographic waveguide displays

In this manuscript, the astigmatism of the waveguide combiner with a pair of symmetry HOEs was analyzed. The light field can be predicted by the modified convolution formulation of Fresnel diffraction when the information of light passes through the astigmatism causing element. Then the astigmatism can be corrected. The theory was experimentally proved by the system with a phase-only SLM and a diffraction planar waveguide. Furthermore, the image quality of astigmatism corrected phase-type CGHs can be improved via the iteration process. Since the coherence of light source was employed, the temporal averaging method was utilized to avoid speckle noise.

Full-color computer-generated holographic near-eye display based on white light illumination

We propose a full color computer generated holographic near-eye display (NED) based on white light illumination. The method inspired from color rainbow holography is used for calculation of 2D and 3D color holograms. The parameters of the color hologram calculation are designed based on the parameters of the spatial light modulator (SLM) with 4K resolution. A slit type spatial filter is designed in frequency domain to extract red, green and blue frequency components for full color display. A NED system including a white light source, an achromatic collimating lens, a 4K SLM, a 4f optical filtering system, and an achromatic lens as eyepiece is designed and developed. The main contribution of this paper is the first time to apply the rainbow holography concept to the dynamic full color NED with a compact display system. The optical experiments prove the feasibility of the proposed method.

Color LED DMD holographic display with high resolution across large depth

Holographic displays employing digital micromirror devices (DMDs) reconstruct 3D images at high diffraction orders. For LED displays, this geometry introduces large dispersion at the DMD surface, reducing image resolution and depth. This work proposes a color DMD LED holographic display with dispersion compensation utilizing an additional diffraction grating in an illumination module. The solution allows to obtain image depth up to 100 mm, which is comparable to the one achieved by a liquid crystal spatial light modulator, where the limiting factor is spatial coherence of the source. Experimental comparison of the results obtained with the laser and LED source gives evidence of effective speckle noise reduction, even from a single frame.

Synthetic amplitude for improved reconstruction of noniterative phase holograms

In this paper, we show how a specially designed synthetic amplitude can be used to obtain greatly improved reconstruction of objects only using the phase data of their Fourier or Fresnel transforms. The reconstruction of objects from phase-only information is of interest because phase modulation has much higher efficiency than amplitude modulation and can be achieved with a high degree of precision with current liquid-crystal-on-silicon spatial light modulators. However, direct reconstruction of an object from its phase information usually results in severely degraded outputs. Due to this issue, to achieve optimal reconstruction, the object information must be codified in a phase hologram by means of time-consuming algorithms. To avoid these kinds of algorithms, we propose using a synthetic amplitude, designed in such a way that, when multiplied with the phase information of the object, leads to high-quality reconstruction. This synthetic amplitude contains no information about the object and can be used to reconstruct a number of different inputs without further processing. We present experiments carried out in virtual and actual optical systems verifying the validity of our proposal for 2D, 3D, and dynamic scenes.

Full color holographic display system based on intensity matching of reconstructed image

In this paper, a full color holographic display system based on the intensity matching of the reconstructed image is proposed. The system consists of three color collimated beams, three spatial light modulators (SLMs), three beam splitters, three lenses, three irises, a prism and a receiving screen. The three SLMs are used to load three color holograms, respectively. In order to eliminate the undesirable light in the reconstructed images and adjust the light intensities, the irises which contain two functions of both light intensity attenuation and aperture variation are cleverly produced. Finally, by using the prism, three color images can be coincident on the receiving screen. Experimental results verify the feasibility of the proposed system.

Single SLM full-color holographic three-dimensional video display based on image and frequency-shift multiplexing

A single spatial-light-modulator (SLM) full-color holographic 3-D video display based on image and frequency-shift multiplexing (IFSM) is proposed. In the frequency-shift multiplexing (FSM), three-color holograms are multiplied with their respective phase factors for shifted-separations of their corresponding frequency-spectrums on the Fourier plane. This FSM process, however, causes three-color images to be reconstructed at the center-shifted locations depending on their multiplied phase factors. Center-shifts of those color images due to the FSM can be balanced out just by generation of three-color holograms whose centers are pre-shifted to the opposite directions to those of the image shifts with the novel-look-up-table (NLUT) based on its shift-invariance property, which is called image-shift multiplexing (ISM). These image and frequency-shifted holograms are then multiplexed into a single color-multiplexed hologram and loaded on the SLM, and from which a full-color 3-D image can be reconstructed on the optical 4-f lens system without any color dispersion just by employing a simple pinhole filter mask. Fourier-optical analysis and experiments with 3-D objects in motion confirm the feasibility of the proposed system.

Curved multiplexing computer-generated hologram for 3D holographic display

A curved multiplexing method based on the curved computer-generated hologram (CCGH) is proposed theoretically and demonstrated experimentally to increase field of view (FOV) and spatial bandwidth. Point source method is used to calculate the CCGH. Curved multiplexing method can be used to reconstruct different 3D objects at the same position by bending a composed hologram which is synthesized of several CCGHs with different central angles. Numerical simulations and optical experiments demonstrate that the method is feasible. It could have a good prospect by combining with the curved display screen and flexible display materials.

Light Attenuation Display: Subtractive See-Through Near-Eye Display via Spatial Color Filtering

We present a display for optical see-through near-eye displays based on light attenuation, a new paradigm that forms images by spatially subtracting colors of light. Existing optical see-through head-mounted displays (OST-HMDs) form virtual images in an additive manner-they optically combine the light from an embedded light source such as a microdisplay into the users' field of view (FoV). Instead, our light attenuation display filters the color of the real background light pixel-wise in the users' see-through view, resulting in an image as a spatial color filter. Our image formation is complementary to existing light-additive OST-HMDs. The core optical component in our system is a phase-only spatial light modulator (PSLM), a liquid crystal module that can control the phase of the light in each pixel. By combining PSLMs with polarization optics, our system realizes a spatially programmable color filter. In this paper, we introduce our optics design, evaluate the spatial color filter, consider applications including image rendering and FoV color control, and discuss the limitations of the current prototype.

Electrowetting-actuated multifunctional optofluidic lens to improve the quality of computer-generated holography

This paper presents an electrowetting-actuated multifunctional optofluidic (EAMO) lens to improve the quality of computer-generated holography (CGH). A unique structure of the EAMO lens based on electrowetting effect is designed. When the electrodes of the EAMO lens are applied on different voltages, the functions of focal length change and aperture change can be achieved. Then the proposed lens is used in the reproduction system of the CGH due to the multiple functions. The experimental results show that the CGH with zoom function can be realized and undesirable light can be eliminated due to the unique structure of the EAMO lens. The focal length changes can be varied from 11.6 cm to + ∞ and -∞ to -150.6 cm. The aperture size changes can be varied from 10.1 cm to 6.7 cm. By using the proposed EAMO lens, high-quality CGH can be realized without moving the position of any components mechanically, while the setup of the CGH is greatly simplified.

Method of chromatic aberration elimination in holographic display based on zoomable liquid lens

In this paper, we propose a method of chromatic aberration elimination in holographic display based on a zoomable liquid lens. The liquid lens is filled with two immiscible liquids and developed by using the principle of electrowetting. The shape at the liquid-liquid interface changes with the voltage applied to the liquid lens, so the focal length can be adjusted by changing the voltage. By using the liquid lens in the holographic display system, the position of the reconstructed image can be controlled. When three color lasers illuminate the corresponding holograms and the focal length of the liquid lens changes accordingly, three color images can coincide in the same location clearly. The experimental results verify its feasibility.

Holographic zoom micro-projection system based on three spatial light modulators

In this paper, we propose a holographic zoom micro-projection system based on three spatial light modulators (SLMs). Three color lasers, three filters, and three solid lenses form the system's collimated light sources. Three beam splitters and a prism are used in the system for beam deflection. The SLMs are used as the micro-displays in order to realize phase modulation. A liquid lens, which consists of a circular hole in the center of the middle substrate and several holes around the center, is developed in the system and it. A receiving screen is located behind the liquid lens. When the voltage applied to the liquid lens is changed, the focal length changes accordingly due to electrowetting effect. Three color holograms are loaded on the SLMs, respectively. When three color lasers are used to illuminate the corresponding holograms, the position and size of each color reproduction image can be adjusted by changing the focal length of the liquid lens and holograms loaded onto the SLMs. Therefore, three color images can be reconstructed together perfectly. The proposed system can realize function of zoom micro-projection without chromatic aberration. The experimental results verify its feasibility.

Novel computer-generated hologram encoding method based on partially temporal coherent light

Partially temporal coherent light (PTCL) has been applied to holographic reconstruction to reduce speckle noise in display systems, while the encoding methods of computer-generated hologram (CGH), based on PTCL, have not been reported. We propose a novel method to encoding CGH, in which a PTCL with a broadband continuous spectrum is used to illuminate the object image. The continuous spectrum is discretized into different wavelengths and a weight value associated with PTCL power spectrum is assigned to each wavelength. The diffractive transmission is based on Fresnel diffraction theory. The phase distribution of the encoded CGH is obtained using the sum of multiplying the different CGH phase distributions of corresponding discrete wavelengths by the corresponding weight values. The modulation results without iteration are performed to verify the feasibility of the proposed method and the iterative algorithm is introduced to improve the quality of the modulation. The reconstructed images from the proposed encoding method exhibit high quality as compared with that obtained from the encoding method based on ideal temporal coherent light. Numerical simulations and optical experiments are good consistent with each other. The proposed method can provide a reference for various wave-front modulations.

Miniature holographic projector with cloud computing capability

A fully functional miniaturized projection head below 5  cm³ is presented, using computer-generated holograms dynamically displayed on a liquid-crystal spatial light modulator. Spatial division of the modulator is used for color projection without color breakup, and specially designed, anti-reflection coated prisms ensure simple light paths with small losses. Real-time calculations are performed on a remote server with on-the-fly compression of holographic fringes. Cloud computing allows 1 W of local electrical power usage and apparent image brightness equivalent to 15-500 lm/W efficiency, depending on the displayed content. The properties of the projector allow future applications in handheld displays.

Fourier rainbow holography

We present Fourier rainbow holographic imaging approach. It involves standard laser holographic recording and novel horizontal parallax only holographic display. In the display, the rainbow effect is introduced in an illumination module by high-frequency diffraction grating and white light LED source. The display is addressed by Fourier rainbow digital hologram (FRDH) encoding defocused object field with removed spatial frequency components in one direction by hologram slitting and without spherical phase factor. Theoretically and experimentally it is shown that the method extends the viewing zone of the classical viewing window display in vertical and longitudinal directions, thus the comfort of observation is improved. It is also numerically and experimentally validated that the numerical slitting applied within FRDH generation improves reconstruction depth of the display, here up to 400 mm.

Colour computer-generated holography for point clouds utilizing the Phong illumination model

A technique integrating the bidirectional reflectance distribution function (BRDF) is proposed to generate realistic high-quality colour computer-generated holograms (CGHs). We build on prior work, namely a fast computer-generated holography method for point clouds that handles occlusions. We extend the method by integrating the Phong illumination model so that the properties of the objects' surfaces are taken into account to achieve natural light phenomena such as reflections and shadows. Our experiments show that rendering holograms with the proposed algorithm provides realistic looking objects without any noteworthy increase to the computational cost.

Depth-layer weighted prediction method for a full-color polygon-based holographic system with real objects

We propose a full-color polygon-based holographic system for real three-dimensional (3D) objects using a depth-layer weighted prediction method. The proposed system is composed of four main stages: acquisition, preprocessing, hologram generation, and reconstruction. In the preprocessing stage, the point cloud model is separated into red, green, and blue channels with depth-layer weighted prediction. The color component values are characterized based on the depth information of the real object, then color prediction is derived from the measurement data. The computer-generated holograms reconstruct 3D full-color images with a strong sensation of depth resulting from the polygon approach. The feasibility of the proposed method was confirmed by numerical and optical reconstruction.

Single SLM full-color holographic 3-D display based on sampling and selective frequency-filtering methods

A single SLM (spatial light modulator) full-color holographic 3-D display based on sampling and selective frequency-filtering methods is proposed. Spatially-sampled R(red), G(green) and B(blue)-holograms can provide periodic 3 × 3 arrays of their frequency spectrums. Thus, by allocating three groups of three spectrums to each color hologram, and selectively filtering out those spectrums with their own spectrum filtering masks (SFMs), frequency-filtered R, G and B-holograms can be obtained. These holograms are synthesized into a single color-multiplexed hologram, and optically reconstructed into a color distortion-free full-color 3-D object on the 4-f lens system, where color-dispersion due to the pixelated structure of the SLM can be removed with the optical versions of SFMs. Fourier-optical analysis and experiments with 3-D color objects in motion confirm the feasibility of the proposed system in the practical application.

Full-color holographic display with increased-viewing-angle [Invited]

Among the important features of holographic displays are the wide viewing angles and the full color of the reconstructed images. The present work focuses on achievement of both features. We propose an increased-viewing-angle full-color holographic display using two tiled phase-only spatial light modulators (SLMs), a 4f concave mirrors system, and a temporal-spatial multiplexing method. The 4f optical system consists of two concave mirrors and serves to increase the viewing angle. A temporal-spatial multiplexing synchronization control (TSMSC) method is developed to achieve a full-color image and to remove the color crosstalk of the image. We calculate RGB phase-only holograms of a computer-generated color pyramid by using a slice-based Fresnel diffraction algorithm. The experimental results indicate that the proposed display system is feasible to reconstruct a full-color holographic 3D image with a viewing angle of 12.8°, which is about 3.8 times wider than the viewing angle formed by a single SLM.

Multiview holographic 3D dynamic display by combining a nano-grating patterned phase plate and LCD

Limited by the refreshable data volume of commercial spatial light modulator (SLM), electronic holography can hardly provide satisfactory 3D live video. Here we propose a holography based multiview 3D display by separating the phase information of a lightfield from the amplitude information. In this paper, the phase information was recorded by a 5.5-inch 4-view phase plate with a full coverage of pixelated nano-grating arrays. Because only amplitude information need to be updated, the refreshing data volume in a 3D video display was significantly reduced. A 5.5 inch TFT-LCD with a pixel size of 95 μm was used to modulate the amplitude information of a lightfield at a rate of 20 frames per second. To avoid crosstalk between viewing points, the spatial frequency and orientation of each nano-grating in the phase plate was fine tuned. As a result, the transmission light converged to the viewing points. The angular divergence was measured to be 1.02 degrees (FWHM) by average, slightly larger than the diffraction limit of 0.94 degrees. By refreshing the LCD, a series of animated sequential 3D images were dynamically presented at 4 viewing points. The resolution of each view was 640 × 360. Images for each viewing point were well separated and no ghost images were observed. The resolution of the image and the refreshing rate in the 3D dynamic display can be easily improved by employing another SLM. The recoded 3D videos showed the great potential of the proposed holographic 3D display to be used in mobile electronics.

On-speckle suppression in IR digital holography

Long-IR wavelength is the best option for capturing digital holograms of large-size, real-world objects. However, the coherent noise level in a long-IR hologram is by far larger than that of a visible wavelength recording, thus resulting in a poor quality of both numerical and optical reconstructions. In this Letter, we show how such coherent noise can be efficiently suppressed by employing an optical scanning multi-look approach, in combination with 3D block matching numerical filtering. Results demonstrate the possibility to obtain near noise-free numerical reconstructions of IR digital holograms of large-size objects, while preserving resolution. We applied this method to the holograms of a rotating statuette. It will be shown that a remarkable contrast enhancement is achievable along with the recovery of object details that otherwise would be lost because of large speckle grains intrinsically due to the source coherence.

Effective information processing method to produce a computer-generated hologram based on a spatial light modulator

In this paper, we propose an effective information processing method to produce a computer-generated hologram (CGH) based on a spatial light modulator (SLM). The method generates CGHs according to the property of the field of view (FOV), which, to the best of our knowledge, has never been proposed before. The CGH is composed of essential interference patterns (EIPs). Each EIP records the information of different object points. The resolution of the EIP is reduced. In the reconstructed process, the boundaries of the diffraction light of each EIP and FOV of the reconstructed image are parallel with each other. Compared with the conventional method, the experiments here demonstrate that the effective reconstructed information in the FOV has no change, while the waste reconstructed information out of the FOV is decreased at any viewing distance. The CGH can reconstruct an image with high quality. Meanwhile, the computation burden of calculating the CGH is reduced with our method.

Generation of complementary sampled phase-only holograms

If an image is uniformly down-sampled into a sparse form and converted into a hologram, the phase component alone will be adequate to reconstruct the image. However, the appearance of the reconstructed image is degraded with numerous empty holes. In this paper, we present a low complexity and non-iterative solution to this problem. Briefly, two phase-only holograms are generated for an image, each based on a different down-sampling lattice. Subsequently, the holograms are displayed alternately at high frame rate. The reconstructed images of the 2 holograms will appear to be a single, densely sampled image with enhance visual quality.