Generation of photonic orbital angular momentum superposition states using vortex beam emitters with superimposed gratings

On-chip generation of adjustable cylindrical vector beams

Cylindrical vector (CV) beams have sparked considerable interest due to their extraordinary vectorial properties, desirable for applications ranging from microscopy to high energy physics. Increasing demand for cost-effective, small-footprint photonics has fueled the development of photonic integrated circuits (PICs) capable of generating structured light beams in recent years. This technology however suffers from low reconfigurability, limiting the variety of CV beams that can be generated from these devices. In this article, we propose a novel design to overcome this limitation, which exploits the polarization-dependent response of annular gratings embedded into a microring resonator to generate re-configurable CV beams. We demonstrate the viability of the device in a proof-of-principle experiment including spatially resolved Stokes measurements.

On-chip ultracompact multimode vortex beam emitter based on vertical modes

Free-space orbital angular momentum (OAM) communication is considered as one of the potential alternative on-chip optical interconnect solutions. The number of OAM modes determines the capacity of high-speed communication. However, existing integrated vortex beam emitters have a constraint relationship between the number of OAM modes and the emitter size, rendering it difficult to emit more OAM modes with a small-sized emitter. In view of the above, this study proposes an on-chip ultracompact multimode vortex beam emitter based on vertical modes, which permits more OAM modes without requiring an increase in the size of the emitter. Vertical modes in large-aspect-ratio waveguides are pointed out to enable multimode microrings with small radii because high-order vertical modes can maintain almost the same horizontal wave vector as that of the fundamental mode. Four-mode and five-mode vortex beam emitters with the same radius of 1.5 µm are designed and the effectiveness of these emitters is verified through simulation. Furthermore, a high-efficiency and low-crosstalk approach for high-order vertical mode coupling by varying the waveguide height is presented. This research not only promotes further integration of on-chip optical interconnection, but also provides a new strategy for optical waveguide mode selection in photonic integrated circuits design.

Recent Advances in Generation and Detection of Orbital Angular Momentum Optical Beams-A Review

Herein, we have discussed three major methods which have been generally employed for the generation of optical beams with orbital angular momentum (OAM). These methods include the practice of diffractive optics elements (DOEs), metasurfaces (MSs), and photonic integrated circuits (PICs) for the production of in-plane and out-of-plane OAM. This topic has been significantly evolved as a result; these three methods have been further implemented efficiently by different novel approaches which are discussed as well. Furthermore, development in the OAM detection techniques has also been presented. We have tried our best to bring novel and up-to-date information to the readers on this interesting and widely investigated topic.

Arbitrarily directed emission of integrated cylindrical vector vortex beams by geometric phase engineering

Integrated cylindrical vector vortex (CVV) emitters have been introduced and studied for their potential applications in classical optics and quantum optics technologies. In this work, we demonstrate that the emission angle of integrated CVV emitters can be engineered by taking advantage of the geometrical phase of a microring resonator. Two methods to superimpose an arbitrary phase profile on top of the integrated emitters are presented and compared. Angled emission of integrated vector vortex beams enables the use of chip-scale emitters for integrated nonlinear optics and for beam steering applications with orbital angular momentum.

Orbital angular momentum vector modes (de)multiplexer based on multimode micro-ring

Orbital angular momentum (OAM) multiplexing has emerged as an important method to increase the communication capacities in future optical information technologies. In this work, we demonstrate a silicon integrated OAM (de)multiplexer with a very simple structure. By simply tapping the evanescent wave of two different whispering gallery modes rotating inside a multimodal micro-ring resonator, four in-plane waveguide modes are converted to four free-space vector OAM beams with high mode purity. We further demonstrate chip-to-chip OAM multiplexing transmission using a pair of silicon devices, which shows low-level mode crosstalk and favorable link performance.

Proposed phase plate for superimposed orbital angular momentum state generation

In this letter, a quadratic phase plate (QPP) whose thickness increases quadratically with azimuthal angle φ is proposed. When a beam with initial topological charge m (m could be an arbitrary integer) is passed through the plate, quadratic phase modulation can be expected to expand the initial single orbital angular momentum (OAM) mode to a superimposed OAM state. The obtained multi-OAM state exhibits a comb-like OAM spectrum, which shows a flat region. The power variation of the OAM modes within the flat region is less than 3 dB, while the power for the OAM modes with charge numbers out of the flat region decays rapidly. Moreover, the number of OAM modes within the flat region can reach dozens. This may have potential applications in the field of communication, quantum information and optical manipulation, etc.

3 × 3 optical switch by exploiting vortex beam emitters based on silicon microrings with superimposed gratings

A silicon-on-insulator microring with three superimposed gratings is proposed and characterized as a device enabling 3×3 optical switching based on orbital angular momentum and wavelength as switching domains. Measurements show penalties with respect to the back-to-back of <1  dB at a bit error rate of 10^-9 for OOK traffic up to 20 Gbaud. Different switch configuration cases are implemented, with measured power penalty variations of less than 0.5 dB at bit error rates of 10^-9. An analysis is also carried out to highlight the dependence of the number of switch ports on the design parameters of the multigrating microring.

Integrated optical modulator manipulating the polarization and rotation handedness of Orbital Angular Momentum states

Recent studies demonstrated that the optical channels encoded by Orbital Angular Momentum (OAM) are capable candidates for improving the next generation of communication systems. OAM states can enhance the capacity and security of high-dimensional communication channels in both classical and quantum regimes based on optical fibre and free space. Hence, fast and precise control of the beams encoded by OAM can provide their commercial applications in the compatible communication networks. Integrated optical devices are good miniaturized options to perform this issue. This paper proposes a numerically verified integrated high-frequency electro-optical modulator for manipulation of the guided modes encoded in both OAM and polarization states. The proposed modulator is designed as an electro-optically active Lithium Niobate (LN) core photonic wire with silica as its cladding in a LN on Insulator (LNOI) configuration. It consists of two successive parts; a phase shifter to reverse the rotation handedness of the input OAM state and a polarization converter to change the horizontally polarized OAM state to the vertically polarized one. It is shown that all four possible output polarization-OAM encoded states can be achieved with only 6 V and 7 V applied voltages to the electrodes in the two parts of the modulator.