Electronically tunable thulium-holmium mode-locked fiber laser for the 1700-1800 nm wavelength band

Raman dissipative soliton source of ultrashort pulses in NIR-III spectral window

We present a novel fiber source of ultrashort pulses at the wavelength of 1660 nm based on the technique of external cavity Raman dissipative soliton generation. The output energy of the generated 30 ps chirped pulses is in the range of 0.5-3.6 nJ with a slope efficiency of 57%. Numerical simulations are in excellent agreement with the experimental results and the shape of the compressed pulses. The compressed pulses consist of a central part with a duration of 300 fs and a weak pedestal. Our results clearly demonstrate the potential to extend the spectral range of the Raman-assisted technique for generating ultra-short pulses to new frequency regions, including biomedical windows. This paves the way for the development of new dissipative soliton sources in these bands.

Tm3+/Ho3+ profiled co-doped core area optical fiber for emission in the range of 1.6-2.1 µm

Double-clad optical fiber with a multi-ring core profile doped with thulium and holmium fabricated by Modified Chemical Vapor Deposition Chelate Doping Technology (MCVD-CDT) is presented. The measured Tm2O3 and Ho2O3 complexes' weight concentrations were 0.5% and 0.2% respectively. Numerical analyses show weakly guiding conditions and 42.2 µm of MFD LP01 at 2000 nm. The low NA numerical aperture (NA = 0.054) was obtained for the 20/250 µm core/cladding ratio optical fiber construction. The emission spectra in the range of 1.6-2.1 µm vs. the fiber length are presented. The full width at half maximum (FWHM) decreases from 318 to 270 nm for fiber lengths from 2 to 10 m. The presented fiber design is of interest for the development of new construction of optical fibers operating in the eye-safe spectral range.

1.8-µm laser operation based on femtosecond-laser direct written Tm:YVO4 cladding waveguides

In this work, we have demonstrated tunable 1.8-µm laser operation based on a Tm:YVO₄ cladding waveguide fabricated by means of femtosecond laser direct writing. Benefiting from the good optical confinement of the fabricated waveguide, efficient thulium laser operation, with a maximum slope efficiency of 36%, a minimum lasing threshold of 176.8 mW, and a tunable output wavelength from 1804 to 1830nm, has been achieved in a compact package via adjusting and optimizing the pump and resonant conditions of the waveguide laser design. The lasing performance using output couplers with different reflectivity has been well studied in detail. In particular, due to the good optical confinement and relatively high optical gain of the waveguide design, efficient lasing can be obtained even without using any cavity mirrors, thereby opening up new possibilities for compact and integrated mid-infrared laser sources.

Tunable dissipative soliton Tm-doped fiber laser operating from 1700 nm to 1900 nm

In this Letter, we demonstrate an ultrabroadband (1700-1900 nm) tunable Tm-doped fiber laser (TDFL) generating dissipative solitons in the net-normal dispersion regime. The laser delivers pulses with spectral widths ranging from 10 nm to 23 nm and pulse durations from 8.7 ps to 18.3 ps. Stretched-free pulse amplification at the gain edge (1708 nm) and gain peak (1807 nm) is implemented to demonstrate the range of further power scalability of the laser signal. The maximum achieved power in a one-stage Tm-doped amplifier is 140 mW with a compressed pulse duration of 478 fs. Considering the diverse utility of this wavelength band, this laser is highly desirable for applications such as optical sensing, biological imaging, and industrial machining.

Electromagnetic fields between moving mirrors: singular waveforms inside Doppler cavities

Phenomena of wave propagation in dynamically varying structures have reemerged as the temporal variations of the medium's properties can extend the possibilities for electromagnetic wave manipulation. While the dynamical change of the electromagnetic medium's properties is a difficult task, the movement of scatterers is not. In this paper, we analyze the electromagnetic fields trapped inside two smoothly moving mirrors. We employ the method of characteristics and take into account the relativistic phenomena to show that the temporally and spatially local Doppler effects can filter and amplify the electromagnetic signal, tailoring the k - and ω -content of the transients. It is shown using the Doppler factor and the change of the distance between neighbor characteristics that the dynamical movement of the boundaries can lead to condensation or dilution of characteristics resulting in field amplification or attenuation, respectively. In the case of periodically moving mirrors the field distribution is shown that asymptotically leads to exponentially growing delta-like wave packets at discrete points of space with a limiting number of peaks due to the fact that the velocity of the mechanical vibrations cannot exceed that of light. The theoretical analysis is also verified by FDTD simulations and is connected with the theory of mode locking.

In vivo three- and four-photon fluorescence microscopy using a 1.8 µm femtosecond fiber laser system

Multiphoton microscopy has enabled us to image cellular dynamics in vivo. However, the excitation wavelength for imaging with commercially available lasers is mostly limited between 0.65-1.04 µm. Here we develop a femtosecond fiber laser system that produces ∼150 fs pulses at 1.8 µm. Our system starts from an erbium-doped silica fiber laser, and its wavelength is converted to 1.8 µm using a Raman shift fiber. The 1.8 µm pulses are amplified with a two-stage Tm:ZBLAN fiber amplifier. The final pulse energy is ∼1 µJ, sufficient for in vivo imaging. We successfully observe TurboFP635-expressing cortical neurons at a depth of 0.7 mm from the brain surface by three-photon excitation and Clover-expressing astrocytes at a depth of 0.15 mm by four-photon excitation.

Widely tunable continuous-wave fiber laser in the 1.55-1.8 µm wavelength region

In this paper, we experimentally demonstrate a continuous-wave widely wavelength-tunable fiber laser based on erbium- and bismuth-doped fibers in parallel configuration. A diffraction grating was used for wavelength tuning, and the tuning range of 268 nm (from 1545 to 1813 nm) was obtained using Littrow design. This result is significantly greater than demonstrated previously in the same spectral region with erbium or bismuth doped fiber lasers.

1.7 µm figure-9 Tm-doped ultrafast fiber laser

The evolution of multiphoton microscopy is critically dependent on the development of ultrafast laser technologies. The ultrashort pulse laser source at 1.7 µm waveband is attractive for in-depth three-photon imaging owing to the reduced scattering and absorption effects in biological tissues. Herein, we report on a 1.7 µm passively mode-locked figure-9 Tm-doped fiber laser. The nonreciprocal phase shifter that consists of two quarter-wave plates and a Faraday rotator introduces phase bias between the counter-propagating beams in the nonlinear amplifying loop mirror. The cavity dispersion is compensated to be slightly positive, enabling the proposed 1.7 µm ultrafast fiber laser to deliver the dissipative soliton with a 3-dB bandwidth of 20 nm. Moreover, the mode-locked spectral bandwidth could be flexibly tuned with different phase biases by rotating the wave plates. The demonstration of figure-9 Tm-doped ultrafast fiber laser would pave the way to develop the robust 1.7 µm ultrashort pulse laser sources, which could find important application for three-photon deep-tissue imaging.

1.7 µm gain-switched and mode-locked hybrid Tm-Ho codoped fiber laser signal generation and optimization

We propose and experimentally demonstrate 1.7 µm gain-switched and mode-locked hybrid laser signal generation using a modulated pump and the nonlinear polarization rotation (NPR) effect. In the laser scheme, a 1.55 µm amplified modulated optical signal was used as a homemade pump. A bidirectional pumping configuration was adopted by splitting the homemade pump. A 1 m long thulium-holmium (Tm-Ho) codoped fiber was used as the gain medium. A fiber Bragg grating was employed as a spectral filter. The mode-locked laser pulse was obtained with a central wavelength of 1724 nm. The repetition rate was 11.81 MHz and the pulse width was 65.27 ps. Additionally, the gain-switched pulse sequences with a repetition rate from 50 kHz to 200 kHz were obtained by the modulated pump. Moreover, the mode-locked pulse train was filtered and modulated by the shape of the gain-switched pulse, and the hybrid pulse train was then obtained. Furthermore, the hybrid laser signals were analyzed and optimized by applying different waveforms of the modulated pump. The experimental results showed that the generated laser pulse driven by the sinusoidal signal has a better SNR (49.39 dB).

1.7 µm Tm-fiber chirped pulse amplification system with dissipative soliton seed laser

We report on a 1.7 µm Tm-fiber chirped pulse amplification (CPA) system by virtue of a broadband dissipative soliton seed laser. The seed oscillator delivers the dissipative soliton with 10 dB spectral bandwidth of 23 nm and an average power of 4 mW. The duration of the seed pulse is directly stretched to ∼60ps by a segment of 50 m normal dispersion fiber. Using a two-stage fiber amplifier, the average power of the pulse is amplified to 1.95 W with a slope efficiency of 40.3%. The amplified pulse is then compressed to 348 fs by a pair of fused silica transmission gratings. The compressed average power of 1.3 W and peak power of 155 kW are achieved. These experimental results would pave the way to achieve a high-power femtosecond laser source at 1.7 µm, which could find important applications in fields such as three-photon deep-tissue imaging and material processing.

Pulsed fiber laser oscillator at 1.7 µm by stimulated Raman scattering in H2-filled hollow-core photonic crystal fibers

We have reported a pulsed fiber gas Raman laser oscillator at 1.7 µm based on an all-fiber resonant cavity, which is made by splicing solid-core fibers with a 50-meter-long hydrogen-filled hollow-core photonic crystal fiber and further introducing homemade fiber Bragg gratings at the Raman wavelength. Pumping by a homemade pulsed 1540 nm fiber amplifier, a 1693 nm Stokes wave is obtained by pure rotational stimulated Raman scattering of H₂. The maximum optical-to-optical efficiency inside the hollow-core fiber is about 54% with the repetition frequency of 6 MHz, giving an average Raman power of 1.5 W, and the Raman threshold of peak power is as low as 3.6 W, which is more than 10 times lower than that of the single-pass structure. The relationship between pulse characteristics and Raman threshold is systematically studied, and the Raman threshold can be reduced dramatically when the repetition frequency of pulses is consistent with the resonant frequency of the cavity. This work provides good guidance for achieving low-threshold pulsed all-fiber gas Raman lasers, which is significant for development and application.

All-Fiber Tunable Pulsed 1.7 μm Fiber Lasers Based on Stimulated Raman Scattering of Hydrogen Molecules in Hollow-Core Fibers

Fiber lasers that operate at 1.7 μm have important applications in many fields, such as biological imaging, medical treatment, etc. Fiber gas Raman lasers (FGRLs) based on gas stimulated Raman scattering (SRS) in hollow-core photonic crystal fibers (HC-PCFs) provide an elegant way to realize efficient 1.7 μm fiber laser output. Here, we report the first all-fiber structure tunable pulsed 1.7 μm FGRLs by fusion splicing a hydrogen-filled HC-PCF with solid-core fibers. Pumping with a homemade tunable pulsed 1.5 μm fiber amplifier, efficient 1693~1705 nm Stokes waves are obtained by hydrogen molecules via SRS. The maximum average output Stokes power is 1.63 W with an inside optical-optical conversion efficiency of 58%. This work improves the compactness and stability of 1.7 μm FGRLs, which is of great significance to their applications.

Picosecond pulse formation in the presence of atmospheric absorption

Mode-locked mid-infrared (MIR) fiber laser research has been dominated by the generation of pulses in the picosecond regime using saturable absorbers (SAs) and more recently frequency shifted feedback (FSF). Despite the significant emphasis placed on the development of materials to serve as the SAs for the MIR, published pulse durations have been substantially longer than what has been reported in the near-infrared (NIR). In this report we present experimental data supporting the view that the majority of demonstrations involving SAs and FSF have been limited by the presence of molecular gas absorption in the free-space sections of their cavities. We show that the pulse duration is directly linked to the width of an absorption-free region of the gaseous absorption profile and that the resulting optical spectrum is nearly always bounded by strong absorption features.

Highly Efficient Nanosecond 1.7 μm Fiber Gas Raman Laser by H2-Filled Hollow-Core Photonic Crystal Fibers

We report here a high-power, highly efficient, wavelength-tunable nanosecond pulsed 1.7 μm fiber laser based on hydrogen-filled hollow-core photonic crystal fibers (HC-PCFs) by rotational stimulated Raman scattering. When a 9-meter-long HC-PCF filled with 30 bar hydrogen is pumped by a homemade tunable 1.5 μm pulsed fiber amplifier, the maximum average Stokes power of 3.3 W at 1705 nm is obtained with a slope efficiency of 84%, and the slope efficiency achieves the highest recorded value for 1.7 μm pulsed fiber lasers. When the pump pulse repetition frequency is 1.3 MHz with a pulse width of approximately 15 ns, the average output power is higher than 3 W over the whole wavelength tunable range from 1693 nm to 1705 nm, and the slope efficiency is higher than 80%. A steady-state theoretical model is used to achieve the maximum Stokes power in hydrogen-filled HC-PCFs, and the simulation results accord well with the experiments. This work presents a new opportunity for highly efficient tunable pulsed fiber lasers at the 1.7 μm band.

High-energy normal-dispersion fiber optical parametric chirped-pulse oscillator

We demonstrate a fiber optical parametric chirped-pulse oscillator (FOPCPO) pumped in the normal-dispersion regime by chirped pulses at 1.036 µm. Highly chirped idler pulses tunable from 1210 nm to 1270 nm with energies higher than 250 nJ are generated from our system, along with signal pulses tunable from 870 nm to 910 nm. Numerical simulations demonstrate that further energy scaling is possible and paves the way for the use of such FOPCPOs for applications requiring high-energy, compact, and low-noise sources, such as in biophotonics or spectroscopy.

Electronically tunable picosecond pulse generation from Ho3+-doped fluoride fiber laser using frequency-shifted feedback

In this Letter, we demonstrate electronically tunable picosecond (ps) pulse emission from the ⁵I₆-⁵I₇ transition of the Ho³⁺ ion by using an acousto-optic tunable filter. The holmium- and praseodymium-codoped ZBLAN fiber laser produced sub-50 ps pulses over a 100 nm tuning range, critically reaching a longest wavelength of 2.94 µm, which overlaps with the peak absorption of liquid water. Measured pulse energies of 8.1 nJ well exceed those expected from picosecond solitonic operation, suggesting possible application in ablative medicine. Furthermore, we present harmonically mode-locked operation of the oscillator, which indicates the possibility of expanding the capabilities of mid-infrared frequency shifted-feedback lasers through the ability to achieve higher pulse repetition rates.

All-fiber short-wavelength tunable mode-locked fiber laser using normal dispersion thulium-doped fiber

We report an all-fiber high pulse energy ultrafast laser and amplifier operating at the short wavelength side of the thulium (Tm) emission band. An in-house W-type normal dispersion Tm-doped fiber (NDTDF) exhibits a bending-induced distributed short-pass filtering effect that efficiently suppresses the otherwise dominant long wavelength emission. By changing the bending diameter of the fiber, we demonstrated a tunable mode-locked Tm-doped fiber laser with a very wide tunable range of 152 nm spanning from 1740 nm to 1892 nm. Pulses at a central wavelength of 1755 nm were able to be amplified in an all-fiber configuration using the W-type NDTDF, without the use of any artificial short-pass filter or pulse stretcher. The all-fiber amplifier delivers 2.76 ps pulses with an energy of ∼32.7 nJ without pulse break-up, due to the normal dispersion nature of the gain fiber, which marks so far, the highest energy amongst fiber lasers in the 1700 nm-1800 nm region.

All-fiber high-power 1700 nm femtosecond laser based on optical parametric chirped-pulse amplification

We present the design and construction of an all-fiber high-power optical parametric chirped-pulse amplifier working at 1700 nm, an important wavelength for bio-photonics and medical treatments. The laser delivers 1.42 W of output average power at 1700 nm, which corresponds to ∼40 nJ pulse energy. The pulse can be de-chirped with a conventional grating pair compressor to ∼450 fs. Furthermore, the laser has a stable performance with relative intensity noise typically below the -130 dBc/Hz level for the idler pulses at 1700 nm from 10kHz to 16.95 MHz, half of the laser repetition rate f/2.

1.7 μm wavelength tunable gain-switched fiber laser and its application to spectroscopic photoacoustic imaging

Recently demonstrated bond-selective photoacoustic (PA) imaging has revealed the importance of 1.7 μm laser sources. In this Letter, we demonstrate a gain-switched thulium-doped fiber laser with continuous tuning from 1690 to 1765 nm by using an electrically driven acousto-optical tunable filter. Micro-joule laser pulses with a shot-to-shot intensity variation of 1.6% and a pulse duration of 150 ns are obtained. The laser source is then harnessed to implement a PA microscopy system, of which the lateral resolution is estimated to be 15.6 μm by scanning the edge of a black tape. The PA spectra of butter, rapeseed oil, and adipose tissue are measured, and they show a consistent absorption peak of around 1720 nm. Photoacoustic microscopy imaging of the adipose tissue demonstrates a high optical absorption contrast of lipids and the superiority of the laser for spectroscopic PA detection.

Several new directions for ultrafast fiber lasers [Invited]

Ultrafast fiber lasers have the potential to make applications of ultrashort pulses widespread - techniques not only for scientists, but also for doctors, manufacturing engineers, and more. Today, this potential is only realized in refractive surgery and some femtosecond micromachining. The existing market for ultrafast lasers remains dominated by solid-state lasers, primarily Ti:sapphire, due to their superior performance. Recent advances show routes to ultrafast fiber sources that provide performance and capabilities equal to, and in some cases beyond, those of Ti:sapphire, in compact, versatile, low-cost devices. In this paper, we discuss the prospects for future ultrafast fiber lasers built on new kinds of pulse generation that capitalize on nonlinear dynamics. We focus primarily on three promising directions: mode-locked oscillators that use nonlinearity to enhance performance; systems that use nonlinear pulse propagation to achieve ultrashort pulses without a mode-locked oscillator; and multimode fiber lasers that exploit nonlinearities in space and time to obtain unparalleled control over an electric field.