Lambertian thermal emitter based on plasmonic enhanced absorption

Multiresonant Selective Emitter with Enhanced Thermal Management for Infrared Camouflage

Tailoring the optical properties of metamaterials is crucial for improving the performance of infrared (IR) applications. Generally, IR camouflage materials are required to have low IR-emission properties for the detected bands (3-5 and 8-12 μm), in which IR detection is accomplished. However, the heat residue by suppressed thermal radiation degrades the thermal dissipation capacity and thermal stability of IR camouflage materials. Herein, a multilayer metal-dielectric-metal (MDM) selective emitter with high IR-emission performance in the undetected band for thermal management and low IR-emission performance in the detected band for IR camouflage is introduced. Compared to a conventional selective emitter and a low-emission material (Au film), the multiresonance selective emitter exhibited 125 and 2910% increases in heat dissipation within the undetected band, respectively. In addition, the proposed camouflage material exhibited a substantial reduction in emissive energy within the detected bands of 3-5 and 8-12 μm, with reductions of 72 and 83%, respectively, compared to that of a high-emission surface. The effectiveness of our IR camouflage was demonstrated by IR camera measurements. When the surface temperature was 360 K, the radiance temperatures of the multilayer multipeak selective emitter were 314 and 309 K for the 3-5 and 8-12 μm bands, respectively. Thermal management experiments demonstrated the enhanced thermal stability of the multiresonance selective emitter, especially in conditions of low pressure and high heat flux, when compared to that of the low-emissivity film. This work provides a practical strategy to enhance the thermal emission of a selective emitter, expanding its potential beyond IR camouflage to various energy applications.

Wide-field-of-view optical detectors for deep ultraviolet light communication using all-inorganic CsPbBr3 perovskite nanocrystals

Optical wireless communication (OWC) links suffer from strict requirements of pointing, acquisition, and tracking (PAT) between the transmitter and receiver. Extending the narrow field-of-view (FoV) of conventional light-focusing elements at the receiver side can relax the PAT requirements. Herein, we use all-inorganic CsPbBr3 nanocrystals (NCs) to extend various optical concentrators' FOV to 60°, regardless of the original FOV values of the concentrators. Given the robustness of UV light against communication channel misalignment, the used CsPbBr3 NCs provide another advantage of converting transmitted UVC light into a green color that matches the peak absorption of the widely available Si-based detectors. We evaluated the feasibility of the reported wide FoV optical detectors by including them in deep UV OWC systems, deploying non-return-to-zero on-off keying (NRZ-OOK) and orthogonal-frequency division multiplexing (OFDM) modulation schemes. The NRZ-OOK and OFDM schemes exhibit stable communication over the 60° FoV, providing data transmission rates of 100 Mb/s and 71.6 Mb/s, respectively, a unique capability to the reported design.

Passive temperature control based on a phase change metasurface

In this paper, a tunable mid-infrared metasurface based on VO₂ phase change material is proposed for temperature control. The proposed structure consisting of a VO₂/SiO₂/VO₂ cavity supports a thermally switchable Fabry-Perot-like resonance mode at the transparency window of the atmosphere. Theoretically, the radiative cooling power density of the proposed metasurface can be switched to four-fold as the device temperature is below/above the phase change temperature of VO₂. Besides radiative cooling, a passive temperature control application based on this huge cooling power switching ability is theoretically demonstrated. We believe the proposed device can be applied for small radiative cooling and temperature control applications.

Tunable dual-band thermal emitter consisting of single-sized phase-changing GST nanodisks

Thermal emission control has been attracting increased attention in both fundamental science and many applications including infrared sensing, radiative cooling and thermophotovoltaics. In this paper, a tunable dual-band thermal emitter including phase-changing material Ge2Sb2Te5 (GST) is experimentally demonstrated. Two emission peak wavelengths are at 7.36 μm and 5.40 μm at amorphous phase, and can be continuously tuned to 10.01 μm and 7.56 μm while GST is tuned to crystalline phase. Compared with other dual-band metamaterial emitters, this tunable dual-band thermal emitter is only composed of an array of single-sized GST nanodisks (on a gold film), which can greatly simplify the design and manufacturing process, and pave the way towards dynamical thermal emission control.