Simultaneous imaging of atherosclerotic plaque composition and structure with dual-mode photoacoustic and optical coherence tomography

Diagnostic and therapeutic optical imaging in cardiovascular diseases

Cardiovascular disease (CVD) is one of the most prevalent health threats globally. Traditional diagnostic methods for CVDs, including electrocardiography, ultrasound, and cardiac magnetic resonance imaging, have inherent limitations in real-time monitoring and high-resolution visualization of cardiovascular pathophysiology. In recent years, optical imaging technology has gained considerable attention as a non-invasive, high-resolution, real-time monitoring solution in the study and diagnosis of CVD. This review discusses the latest advancements, and applications of optical techniques in cardiac imaging. We compare the advantages of optical imaging over traditional modalities and especially scrutinize techniques such as optical coherence tomography, photoacoustic imaging, and fluorescence imaging. We summarize their investigations in atherosclerosis, myocardial infarction, and heart valve disease, etc. Additionally, we discuss challenges like deep-tissue imaging and high spatiotemporal resolution adjustment, and review existing solutions such as multimodal integration, artificial intelligence, and enhanced optical probes. This article aims to drive further development in optical imaging technologies to provide more precise and efficient tools for early diagnosis, pathological mechanism exploration, and treatment of CVD.

Evaluating acoustic and thermal properties of a plaque phantom

PURPOSE

The aim of this study is to evaluate the acoustic and thermal properties of a plaque phantom. This is very important for the effective implementation of ultrasound not only in diagnosis but especially in treatment for the future.

MATERIAL AND METHODS

An evaluation of acoustic and thermal properties of plaque phantoms to test their suitability mainly for ultrasound imaging and therapy was presented. The evaluation included measurements of the acoustic propagation speed using pulse-echo technique, ultrasonic attenuation coefficient using through transmission immersion technique, and absorption coefficient. Moreover, thermal properties (thermal conductivity, volumetric specific heat capacity and thermal diffusivity) were measured with the transient method using a needle probe.

RESULTS

It was shown that acoustic and thermal properties of atherosclerotic plaque phantoms fall well within the range of reported values for atherosclerotic plaque and slightly different for thermal diffusivity and volumetric specific heat capacity for soft tissues. The mean value of acoustic and thermal properties and their standard deviation of plaque phantoms were 1523 ± 23 m/s for acoustic speed, 0.50 ± 0.02 W/mK for thermal conductivity, 0.30 ± 0.21 db/cm-MHz for ultrasonic absorption coefficient and 1.63 ± 0.46 db/cm-MHz for ultrasonic attenuation coefficient.

CONCLUSIONS

This study demonstrated that acoustic and thermal properties of atherosclerotic plaque phantoms were within the range of reported values. Future studies should be focused on the optimum recipe of the atherosclerotic plaque phantoms that mimics the human atherosclerotic plaque (agar 4% w/v, gypsum 10% w/v and butter 10% w/v) and can be used for HIFU therapy.

Biomimicking Atherosclerotic Vessels: A Relevant and (Yet) Sub-Explored Topic

Atherosclerosis represents the etiologic source of several cardiovascular events, including myocardial infarction, cerebrovascular accidents, and peripheral artery disease, which remain the leading cause of mortality in the world. Numerous strategies are being delineated to revert the non-optimal projections of the World Health Organization, by both designing new diagnostic and therapeutic approaches or improving the interventional procedures performed by physicians. Deeply understanding the pathological process of atherosclerosis is, therefore, mandatory to accomplish improved results in these trials. Due to their availability, reproducibility, low expensiveness, and rapid production, biomimicking physical models are preferred over animal experimentation because they can overcome some limitations, mainly related to replicability and ethical issues. Their capability to represent any atherosclerotic stage and/or plaque type makes them valuable tools to investigate hemodynamical, pharmacodynamical, and biomechanical behaviors, as well as to optimize imaging systems and, thus, obtain meaningful prospects to improve the efficacy and effectiveness of treatment on a patient-specific basis. However, the broadness of possible applications in which these biomodels can be used is associated with a wide range of tissue-mimicking materials that are selected depending on the final purpose of the model and, consequently, prioritizing some materials' properties over others. This review aims to summarize the progress in fabricating biomimicking atherosclerotic models, mainly focusing on using materials according to the intended application.

Investigating atherosclerotic plaque phantoms for ultrasound therapy

PURPOSE

The aim of the proposed study was to conduct a feasibility study using a flat rectangular (2 × 10 mm2) transducer operating at 4.0 MHz for creating thermal lesions in an arterial atherosclerotic plaque phantom. The proposed method can be used in the future for treating atherosclerotic plaques in human arteries.

MATERIALS AND METHODS

The flat rectangular transducer was firstly assessed in agar/silica evaporated milk phantom, polyacrylamide phantom and freshly excised turkeytissue phantom. Then, the same transducer was assessed in an arterial atherosclerotic plaque phantom which was created in the laboratory with a very low cost. The recipe of the atherosclerotic plaque phantom was 4% w/v agar, 1% w/v gypsum, 2% w/v butter and 93% water. The amount of plaque removal was evaluated visually and using an X-Ray system.

RESULTS

It was shown that the flat rectangular transducer can create thermal lesions on the agar/silica evaporated milk phantom, polyacrylamide phantom and in excised tissue. The size of the lesions matches the geometry of the transducer. Moreover, this transducer destroyed 27.1% of the atherosclerotic plaque phantom with 8 W acoustical power and 30 s duration.

CONCLUSIONS

This feasibility study demonstrated that atherosclerotic plaque can be destroyed using a very small flat rectangular (2 × 10 mm2) transducer in a very small time interval of 30 s. In future clinical trials the transducer will be incorporated in a catheter which will be inserted intravascular (1-3 mm) wide and can be used to treat atherosclerotic plaques in the coronary arteries.

Shape prior generation and geodesic active contour interactive iterating algorithm (SPACIAL): fully automatic segmentation for 3D lumen in intravascular optical coherence tomography images

PURPOSE

Fully automatic lumen segmentation in intravascular optical coherence tomography (OCT) images can assist physicians in quickly estimating the health status of vessels. However, OCT images are usually degraded by residual blood, catheter walls, guide wire artifacts, etc., which significantly reduce the quality of segmentation. To achieve accurate lumen segmentation in low-quality images, we propose a novel segmentation algorithm named SPACIAL: Shape Prior generation and geodesic Active Contour Interactive iterAting aLgorithm, which is guided by an adaptively generated shape prior.

METHODS

In this framework, the active contour evolves under the guidance of shape prior, while the shape prior is automatically and adaptively generated based on the active contour. The active contour and the shape prior interactively iterate each other, which can generate the adaptive shape prior and consequently lead to accurate segmentation results. In addition, a fast algorithm is introduced to accelerate the segmentation in 3D images.

RESULTS

The validity of the model is verified in 3240 images from 12 OCT pullbacks. The experimental results show satisfactory segmentation accuracy and time efficiency: the average Dice coefficient of SPACIAL is 93.6(2.4)%, and 5.7 times faster than that of the classical level set method.

CONCLUSION

The proposed SPACIAL can quickly and efficiently perform accurate lumen segmentation on low quality OCT images, which is of great importance to cardiovascular disease diagnosis . The SPACIAL method shows great potential in clinical applications.

Quadruple ultrasound, photoacoustic, optical coherence, and fluorescence fusion imaging with a transparent ultrasound transducer

Ultrasound and optical imagers are used widely in a variety of biological and medical applications. In particular, multimodal implementations combining light and sound have been actively investigated to improve imaging quality. However, the integration of optical sensors with opaque ultrasound transducers suffers from low signal-to-noise ratios, high complexity, and bulky form factors, significantly limiting its applications. Here, we demonstrate a quadruple fusion imaging system using a spherically focused transparent ultrasound transducer that enables seamless integration of ultrasound imaging with photoacoustic imaging, optical coherence tomography, and fluorescence imaging. As a first application, we comprehensively monitored multiparametric responses to chemical and suture injuries in rats' eyes in vivo, such as corneal neovascularization, structural changes, cataracts, and inflammation. As a second application, we successfully performed multimodal imaging of tumors in vivo, visualizing melanomas without using labels and visualizing 4T1 mammary carcinomas using PEGylated gold nanorods. We strongly believe that the seamlessly integrated multimodal system can be used not only in ophthalmology and oncology but also in other healthcare applications with broad impact and interest.

Advanced endoscopic imaging for detecting and guiding therapy of early neoplasias of the esophagus

Esophageal cancers, largely adenocarcinoma in Western countries and squamous cell cancer in Asia, present a significant burden of disease and remain one of the most lethal of cancers. Key to improving survival is the development and adoption of new imaging modalities to identify early neoplastic lesions, which may be small, multifocal, subsurface, and difficult to detect by standard endoscopy. Such advanced imaging is particularly relevant with the emergence of ablative techniques that often require multiple endoscopic sessions and may be complicated by bleeding, pain, strictures, and recurrences. Assessing the specific location, depth of involvement, and features correlated with neoplastic progression or incomplete treatment may optimize treatments. While not comprehensive of all endoscopic imaging modalities, we review here some of the recent advances in endoscopic luminal imaging, particularly with surface contrast enhancement using virtual chromoendoscopy, highly magnified subsurface imaging with confocal endomicroscopy, optical coherence tomography, elastic scattering spectroscopy, angle-resolved low-coherence interferometry, and light scattering spectroscopy. While there is no single ideal imaging modality, various multimodal instruments are also being investigated. The future of combining computer-aided assessments, molecular markers, and improved imaging technologies to help localize and ablate early neoplastic lesions shed hope for improved disease outcome.

Towards quantitative assessment of burn based on photoacoustic and optical coherence tomography

Accurate and timely assessment of the severity of burn is essential for the treatment of burns. Currently, although most first-degree and third-degree burns are easily diagnosed through visual inspection or auxiliary diagnostic methods, the second-degree burn is still difficult to distinguish due to the ambiguity boundaries of second-degree with first-degree and third-degree burns. In this study, we proposed a non-invasive technique by combing photoacoustic imaging (PAI) and optical coherence tomography (OCT) to multi-parameter quantitatively assess the burns. The feasibility and capacity of the dual-mode PAT/OCT for assessing the burns was first testified by tissue-mimicking phantom and burn wounds in mouse pinna in vivo. The further experiments conducted on the back of rats showed that the changes in skin scattering structure, vascular morphology and blood flow provided by the dual-mode PAI/OCT system can determine distinct boundaries and depth of the burns. The experimental results prove that combined PAI/OCT as a novel method can be used to assess the severity of burn, which has the potential to diagnose the burns in clinic.

Multi-parameter characterization of atherosclerotic plaques based on optical coherence tomography, photoacoustic and viscoelasticity imaging

Detection of atherosclerotic plaque vulnerability is the critical step in prevention of acute coronary events. Fibrous cap thickness, lipid core size, and inflammation extent are three key parameters for assessing plaque vulnerability. Here, we report on multimodality imaging of mice aortic plaques using a system that integrates optical coherence tomography (OCT), photoacoustic imaging (PAI), and photoacoustic viscoelasticity imaging (PAVEI). The thickness of fibrous cap is accurately evaluated by OCT, and PAI helps to determine the distribution and size of lipid core. The mechanical properties of plaques are closely related to the plaque compositions and the content and distribution of macrophages, while PAVEI can characterize the plaque viscoelasticity through the phase delay of photoacoustic signal. Experimental results demonstrate that the OCT-PAI-PAVEI system can comprehensively characterize the three traits of atherosclerotic plaques, thereby identifying high-risk lesions.

Enhancement of photoacoustic tomography of acoustically inhomogeneous tissue by utilizing a memory effect

One of the major challenges for photoacoustic tomography is the variance of the speed of sound (SOS) in realistic tissue, which could lead to defocusing in image reconstruction and degrade the reconstructed image. In this study, we propose a method to optimize the SOS used for image reconstruction based on a memory effect of photoacoustic signal. We reveal that the photoacoustic signals received by two adjacent transducers have a high degree of similarity in waveform, while a time delay exists between them. The time delay is related to the SOS. Based on this physical phenomenon, an iterative operation is implemented to estimate the SOS used for image reconstruction. Both simulations and experiments confirm that the method significantly enhances the reconstructed image in inhomogeneous tissue. This study may have potential value in improving the performance of photoacoustic tomography in biomedical applications.

Interference-free Detection of Lipid-laden Atherosclerotic Plaques by 3D Co-registration of Frequency-Domain Differential Photoacoustic and Ultrasound Radar Imaging

As lipid composition of atherosclerotic plaques is considered to be one of the primary indicators for plaque vulnerability, a diagnostic modality that can sensitively evaluate their necrotic core is highly desirable in atherosclerosis imaging. In this regard, intravascular photoacoustic (IVPA) imaging is an emerging plaque detection modality that provides lipid-specific chemical information of arterial walls. Within the near-infrared window, a 1210-nm optical source is usually chosen for IVPA applications because lipid exhibits a strong absorption peak at that wavelength. However, other arterial tissues also show some degree of absorption near 1210 nm and generate undesirable interfering PA signals. In this study, a novel wavelength-modulated Intravascular Differential Photoacoustic Radar (IV-DPAR) modality was introduced as an interference-free detection technique for a more accurate and reliable diagnosis of plaque progression. By using two low-power continuous-wave laser diodes in a differential manner, IV-DPAR could efficiently suppress undesirable absorptions and system noise, while dramatically improving system sensitivity and specificity to cholesterol, the primary ingredient of plaque necrotic core. When co-registered with intravascular ultrasound imaging, IV-DPAR could sensitively locate and characterize the lipid contents of plaques in human atherosclerotic arteries, regardless of their size and depth.

Review of the state of the art in cardiovascular endoscopy imaging of atherosclerosis using photoacoustic techniques with pulsed and continuous-wave optical excitations

Intravascular photoacoustics (IV-PA) is an emerging atherosclerosis imaging modality that provides chemical-specific optical information of arterial walls with acoustic depth penetration and resolution. As lipid composition of atherosclerotic plaques is considered to be one of the primary indicators for plaque vulnerability, many IV-PA applications are calibrated so as to target plaque necrotic cores. Based on the mode of optical excitation and the corresponding signal processing technique, IV-PA is categorized into two different modalities. The pulse-based IV-PA has been the universal IV-PA imaging mode with its high peak power and straightforward time-domain signal processing technique. As an alternative, the low power continuous-wave (CW)-based IV-PA has been under intense development as a radar-like frequency-domain signal processing modality. The two state-of-the-art types of IV-PA are reviewed in terms of their physics and imaging capabilities, with major emphasis on frequency-swept CW-based IV-PA that has been recently introduced in the field.

Laser threshold and cell damage mechanism for intravascular photoacoustic imaging

OBJECTIVES

Intravascular photoacoustic (IVPA) imaging is being developed to image atherosclerotic plaques, a leading cause of morbidity and mortality in the United States. However, the safety of this imaging modality, which requires repeated irradiation with short laser pulses, has not yet been investigated. This study has two objectives. First, determine in vitro the limit of cumulative fluence that can be applied to cells before death at IVPA relevant wavelengths. Second, evaluate if high single pulse fluences are a potential cause of cell death during IVPA imaging.

MATERIALS AND METHODS

Experiments were conducted using endothelial cells, macrophages, and smooth muscle cells. The cumulative fluence experiments were conducted at 1064 and 1197 nm, using a high pulse repetition frequency laser. Cells were irradiated with a wide range of cumulative fluences and evaluated for cell death. The thresholds for death were compared to the maximum expected clinical cumulative fluence. To evaluate the effect of single pulse fluences, cells were irradiated at 1064, 1210, and 1720 nm. Light was delivered at a range of pulse energies to emulate the fluences that cells would be exposed to during clinical IVPA imaging.

RESULTS

At 1064 nm, all three cell types remained viable at cumulative fluences above the maximum expected clinical cumulative fluence, which is calculated based on common IVPA imaging protocols. At 1197 nm, cells were viable near or just below the maximum expected clinical cumulative fluence, with some cell type to cell type variation. All three cell types remained viable after irradiation with high single pulse fluences at all three wavelengths.

CONCLUSION

The cumulative fluence experiments indicate that safety considerations are likely to put constraints on the amount of irradiation that can be used in IVPA imaging protocols. However, this study also indicates that it will be possible to use IVPA imaging safely, since cumulative fluences could be reduced by as much as two orders of magnitude below the maximum expected clinical cumulative fluence by varying the imaging protocol, albeit at the expense of image quality. The single pulse fluence experiments indicate that cell death from single pulse fluence is not likely during IVPA imaging. Thus, future studies should focus on heat accumulation as the likely mechanism of tissue damage. Lasers Surg. Med. 51:466-474, 2019. © 2018 Wiley Periodicals, Inc.

Frequency-domain differential photoacoustic radar: theory and validation for ultrasensitive atherosclerotic plaque imaging

Lipid composition of atherosclerotic plaques is considered to be highly related to plaque vulnerability. Therefore, a specific diagnostic or imaging modality that can sensitively evaluate plaques' necrotic core is desirable in atherosclerosis imaging. In this regard, intravascular photoacoustic (IVPA) imaging is an emerging plaque detection technique that provides lipid-specific chemical information from an arterial wall with great optical contrast and long acoustic penetration depth. While, in the near-infrared window, a 1210-nm optical source is usually chosen for IVPA applications since lipids exhibit a strong absorption peak at that wavelength, the sensitivity problem arises in the conventional single-ended systems as other arterial tissues also show some degree of absorption near that spectral region, thereby generating undesirably interfering photoacoustic (PA) signals. A theory of the high-frequency frequency-domain differential photoacoustic radar (DPAR) modality is introduced as a unique detection technique for accurate and molecularly specific evaluation of vulnerable plaques. By assuming two low-power continuous-wave optical sources at ∼1210 and ∼970  nm in a differential manner, DPAR theory and the corresponding simulation/experiment studies suggest an imaging modality that is only sensitive and specific to the spectroscopically defined imaging target, cholesterol.

Advanced Imaging for Barrett's Esophagus and Early Neoplasia: Surface and Subsurface Imaging for Diagnosis and Management

PURPOSE OF REVIEW

Esophageal adenocarcinoma bears one of the fastest rising incidence of any cancers and generally arises in the setting of gastroesophageal reflux and Barrett's esophagus. However, early detection of neoplasia can be challenging since most patients are asymptomatic until they progress to more advanced and less curable stages, and early dysplastic lesions can be small, multifocal, and difficult to detect. Clearly, new imaging tools are needed in light of sampling error associated with random biopsies, the current standard of practice.

RECENT FINDINGS

Advances in endoscopic imaging including virtual chromoendoscopy, confocal laser endomicroscopy, and subsurface imaging with optical coherence tomography have ushered in a new era for detecting subtle neoplastic lesions. Moreover, in light of esophagus-sparing treatments for neoplastic lesions, such tools are likely to guide ablation and follow-up management. While there is no ideal single imaging modality to facilitate improved detection, staging, ablation, and follow-up of patients with dysplastic Barrett's esophagus, new advances in available technology, the potential for multimodal imaging, and the use of computer-aided diagnosis and biomarkers all hold great promise for improving detection and treatment.

Rapid scanning optical delay line based on a diffraction grating pair for a low-coherence reflectometer

We present a simple low-coherence time-domain interferometric reflectometer with a rapidly scanning optical delay line (RSODL) based on a non-parallel diffraction grating (DG) pair. The novelty of the solution is that the lightwave in the reference channel is focused on a galvo-mirror in a sub-mm static spot, which allows implementation of fast microelectromechanical systems scan optics. It is shown that the DG pair can be operated as a non-dispersive element that provides dynamic group delay of a reference lightwave. The DG pair system is also capable of tuning the RSODL dispersion from negative to positive values. The experimental depth range in air was obtained as large as 2.5 mm for axial resolution of 20 μm.

Dual modality reflection mode optical coherence and photoacoustic microscopy using an akinetic sensor

This Letter presents a novel dual modality reflection mode optical coherence and photoacoustic microscopy (OC-PAM) system. The optical coherence microscopy modality features a broadband source to accomplish 5 μm axial resolution. The photoacoustic microscopy modality uses a rigid akinetic Fabry-Perot etalon encapsulated in an optically transparent medium, which forms a 2  mm×11  mm translucent imaging window, permitting reflection mode dual modality imaging. After characterization, the OC-PAM system was applied to image zebrafish larvae in vivo, demonstrating its capability in biomedical imaging with complementary optical scattering and absorption contrasts by revealing morphology in the fish larvae.