All-fiber Brillouin optical spectrum analyzer based on self-sweeping fiber laser

Observation of four self-sweeping regimes in a single-mode bi-directional ytterbium-doped fiber ring laser

In this work, for the first time, four self-sweeping regimes in a single-mode bi-directional ytterbium-doped fiber ring laser are observed by adjusting the polarization controller (PC): normal self-sweeping, reverse self-sweeping, mixed state, and wavelength stop state. In addition, regulating the PC can artificially selectively make the laser operate in normal self-sweeping or reverse self-sweeping within a certain pump power range, and their self-sweeping characteristics (e.g., sweeping rate, sweeping range, etc.) and intensity dynamics are investigated in detail, respectively. In conclusion, we can flexibly regulate the sweeping direction and sweeping characteristics of the bi-directional self-sweeping fiber ring laser in a simple approach by adjusting the PC, which is potentially valuable for its practical application.

Cascade Brillouin Lasing in a Tellurite-Glass Microsphere Resonator with Whispering Gallery Modes

Brillouin microlasers based on microresonators with whispering gallery modes (WGMs) are in high demand for different applications including sensing and biosensing. We fabricated a microsphere resonator with WGMs from a synthesized high-quality tellurite glass with record high Q-factors for tellurite microresonators (Q ≥ 2.5 × 10⁷), a high Brillouin gain coefficient (compared to standard materials, e.g., silica glasses), and a Brillouin frequency shift of 9 ± 0.5 GHz. The high density of excited resonance modes and high loaded Q-factors allowed us to achieve experimentally cascade Stokes-Brillouin lasing up to the 4th order inclusive. The experimental results are supported by the results of the theoretical analysis. We also theoretically obtained the dependences of the output Brillouin powers on the pump power and found the pump-power thresholds for the first five Brillouin orders at different values of pump frequency detuning and Q-factors, and showed a significant effect of these parameters on the processes under consideration.

Dual-longitudinal-mode CW self-sweeping operation in Er-doped fiber laser

A new type of sweeping operation-dual-mode continuous-wave (CW) self-sweeping-is demonstrated in an erbium-doped fiber laser with a sweeping range of 2.8 nm in a region of 1605 nm. The laser generates two adjacent longitudinal modes of equal intensity, but at some moments of time, one of the modes with lower frequency begins to vanish and a new one with even higher frequency starts to grow. As a result, the self-sweeping of lasing frequency with CW intensity dynamics is observed.

Observation of reverse self-sweeping effect in an all-polarization-maintaining bidirectional ytterbium-doped fiber laser

In this article, we report, to the best of our knowledge, the first observation of the reverse self-sweeping phenomenon in an all-polarization-maintaining bidirectional ytterbium-doped fiber laser. Conventional behaviors, including the dependence of sweeping range, sweeping rate and average pulse repetition rate on the pump power, can be observed in our fiber laser. Two couplers with ratio of 50/50 and 10/90 are respectively employed as the output coupler in fiber laser, which generates the reverse self-sweeping phenomenon for comparison.

Broad-range self-sweeping single-frequency linearly polarized Tm-doped fiber laser

We experimentally demonstrate a linearly polarized Tm-doped fiber laser with sweeping range up to 26 nm in the region of 1.92 μm. The main feature of the laser is generation of periodic microsecond pulses in which each contains practically only single longitudinal mode radiation. The laser frequency changes from pulse to pulse with high linearity by one intermode beating frequency of the laser ∼8  MHz. The developed source is applied to measure spectrum of water absorption lines in air.

Michelson mode selector for spectral range stabilization in a self-sweeping fiber laser

We report on spectral range stabilization in a self-sweeping laser by adding a narrowband fiber Bragg grating (FBG) to the output mirror in the Michelson configuration. The effects of FBG reflectivity and optical path difference in the Michelson interferometer on the laser spectral dynamics are investigated. Optimization of the interferometer allows us to demonstrate broadband (over 16 nm) self-sweeping operation and reduction of the start and stop wavelength fluctuations by two orders and one order of magnitude (∼100 and 15 times) for start and stop bounds, respectively (down to several picometers). The proposed approaches significantly improve quality of the spectral dynamics and facilitate application of the self-sweeping lasers.