Time-resolved diffuse optical tomography system using an accelerated inverse problem solver

Single photon single pixel imaging into thick scattering medium

Imaging into thick scattering medium is a long-standing challenge. Beyond the quasi-ballistic regime, multiple scattering scrambles the spatiotemporal information of incident/emitted light, making canonical imaging based on light focusing nearly impossible. Diffusion optical tomography (DOT) is one of the most popular approach to look inside scattering medium, but quantitatively inverting the diffusion equation is ill-posed, and prior information of the medium is typically necessary, which is nontrivial to obtain. Here, we show theoretically and experimentally that, by synergizing the one-way light scattering characteristic of single pixel imaging with ultrasensitive single photon detection and a metric-guided image reconstruction, single photon single pixel imaging can serve as a simple and powerful alternative to DOT for imaging into thick scattering medium without prior knowledge or inverting the diffusion equation. We demonstrated an image resolution of 12 mm inside a 60 mm thick (∼ 78 mean free paths) scattering medium.

Integration of Decay Time Analysis and Radiation Measurement for Quantum-Dot-Based Scintillator’s Characterization

In this study, we demonstrated the process of an integrated apparatus for decay time analysis and gamma radiation measurement with a liquid-scintillator-based cadmium-doped zinc oxide (CZO) nanomaterial. Generally, time-resolved photon counting is an essential analysis method in the field of precision measurement in the quantum domain. Such photon counting equipment requires a pulse laser that can be repeated quickly while having a sharp pulse width of picoseconds or femtoseconds as a light source. Time-correlated single photon counting (TCSPC) equipment, which is currently a commercial product, is inconvenient for recent development research because the scintillator size and shape are limited. Here, neodymium-doped yttrium aluminum garnet (Nd/YAG) laser TCSPC equipment was constructed to analyze the fluorescence characteristics of scintillators having various sizes and shapes. Then, a liquid scintillator added with CZO nanomaterial was prepared and the Nd/YAG laser TCSPC equipment test was performed. As a result of measuring the scintillator using the manufactured Nd/YAG laser TCSPC equipment, the non-CZO liquid scintillator was analyzed at 2.30 ns and the liquid scintillator equipped with CZO-loaded nanomaterial was analyzed at 11.95 ns. It showed an error within 5% when compared with the result of commercial TCSPC equipment. In addition, it was verified that the Nd/YAG laser TCSPC system can sufficiently measure the decay time in nanoseconds (ns). Moreover, it was presented that the Compton edge energy of Cs−137 is 477.3 keV, which hardly generates a photoelectric effect, and Compton scattering mainly occurs.

Imaging through diffuse media using multi-mode vortex beams and deep learning

Optical imaging through diffuse media is a challenging issue and has attracted applications in many fields such as biomedical imaging, non-destructive testing, and computer-assisted surgery. However, light interaction with diffuse media leads to multiple scattering of the photons in the angular and spatial domain, severely degrading the image reconstruction process. In this article, a novel method to image through diffuse media using multiple modes of vortex beams and a new deep learning network named “LGDiffNet” is derived. A proof-of-concept numerical simulation is conducted using this method, and the results are experimentally verified. In this technique, the multiple modes of Gaussian and Laguerre-Gaussian beams illuminate the displayed digits dataset number, and the beams are then propagated through the diffuser before being captured on the beam profiler. Furthermore, we investigated whether imaging through diffuse media using multiple modes of vortex beams instead of Gaussian beams improves the imaging system's imaging capability and enhances the network's reconstruction ability. Our results show that illuminating the diffuser using vortex beams and employing the “LGDiffNet” network provides enhanced image reconstruction compared to existing modalities. When employing vortex beams for image reconstruction, the best NPCC is − 0.9850. However, when using Gaussian beams for imaging acquisition, the best NPCC is − 0.9837. An enhancement of 0.62 dB, in terms of PSNR, is achieved using this method when a highly scattering diffuser of grit 220 and width 2 mm (7.11 times the mean free path) is used. No additional optimizations or reference beams were used in the imaging system, revealing the robustness of the “LGDiffNet” network and the adaptability of the imaging system for practical applications in medical imaging.

Multiwavelength photo-magnetic imaging algorithm improved for direct chromophore concentration recovery using spectral constraints

Multiwavelength photo-magnetic imaging (PMI) is a novel combination of diffuse optics and magnetic resonance imaging, to the best of our knowledge, that yields tissue chromophore concentration maps with high resolution and quantitative accuracy. Here, we present the first experimental results, to the best of our knowledge, obtained using a spectrally constrained PMI image reconstruction method, where chromophore concentration maps are directly recovered, unlike the conventional two-step approach that requires an intermediate step of reconstructing wavelength-dependent absorption coefficient maps. The imposition of the prior spectral information into the PMI inverse problem improves the reconstructed image quality and allows recovery of highly quantitative concentration maps, which are crucial for effective cancer detection and characterization. The obtained results demonstrate the higher performance of the direct reconstruction method. Indeed, the reconstructed concentration maps are not only of higher quality but also obtained approximately 2 times faster than the conventional method.

Three-compartment-breast (3CB) prior-guided diffuse optical tomography based on dual-energy digital breast tomosynthesis (DBT)

Diffuse optical tomography (DOT) is a non-invasive functional imaging modality that uses near-infrared (NIR) light to measure the oxygenation state and the concentration of hemoglobin. By complementarily using DOT with other anatomical imaging modalities, physicians can diagnose more accurately through additional functional image information. In breast imaging, diagnosis of dense breasts is often challenging because the bulky fibrous tissues may hinder the correct tumor characterization. In this work, we proposed a three-compartment-breast (3CB) decomposition-based prior-guided optical tomography for enhancing DOT image quality. We conjectured that the 3CB prior would lead to improvement of the spatial resolution and also of the contrast of the reconstructed tumor image, particularly for the dense breasts. We conducted a Monte-Carlo simulation to acquire dual-energy X-ray projections of a realistic 3D numerical breast phantom and performed digital breast tomosynthesis (DBT) for setting up a 3CB model. The 3CB prior was then used as a structural guide in DOT image reconstruction. The proposed method resulted in the higher spatial resolution of the recovered tumor even when the tumor is surrounded by the fibroglandular tissues compared with the typical two-composition-prior method or the standard Tikhonov regularization method.

Resolving tissue chromophore concentration at MRI resolution using multi-wavelength photo-magnetic imaging

Photo-magnetic imaging (PMI) is an emerging optical imaging modality that showed great performance on providing absorption maps with high resolution and quantitative accuracy. As a multi-modality technology, PMI warms up the imaged object using a near infrared laser while temperature variation is measured using magnetic resonance imaging. By probing tissue at multiple wavelengths, concentration of the main tissue chromophores such as oxy- and deoxy-hemoglobin, lipid, and water are obtained then used to derive functional parameters such as total hemoglobin concentration and relative oxygen saturation. In this paper, we present a multi-wavelength PMI system that was custom-built to host five different laser wavelengths. After recovering the high-resolution absorption maps, a least-squared minimization process was used to resolve the different chromophore concentration. The performance of the system was experimentally tested on a phantom with two different dyes. Their concentrations were successfully assessed with high spatial resolution and average accuracy of nearly 80%.

Continuous monitoring method of cerebral subdural hematoma based on MRI guided DOT

Cerebral subdural hematomas due to trauma can easily worsen suddenly due to the rupture of blood vessels in the brain after the condition is stabilized. Therefore, continuous monitoring of the size of cerebral subdural hematomas has important clinical significance. To achieve fast, real-time, noninvasive, and accurate monitoring of subdural hematomas, a cerebral subdural hematoma monitoring method combining brain magnetic resonance imaging (MRI) image guidance, diffusion optical tomography technology, and deep learning is proposed in this manuscript. First, an MRI brain image is segmented to obtain a three-dimensional multi-layer brain model with structures and parameters matching a real brain. Then, a near-infrared light source and detectors (source-detector separations ranging from 0.5 to 6.5 cm) were placed on the model to achieve fast, real-time and noninvasive acquisition of intracranial hematoma information. Finally, a deep learning method is used to obtain accurate reconstructed images of cerebral subdural hematomas. The experimental results show that the reconstruction effect of stacked auto-encoder with the mean volume error of 0.1 ml is better than the result reconstructed by algebraic reconstruction techniques with the mean volume error of 0.9 ml. Under different signal-to-noise ratios, the curve fitting R² between the actual blood volume of a simulated hematoma and a reconstructed hematoma is more than 0.95. We conclude that the proposed monitoring method can realize fast, noninvasive, real-time, and accurate monitoring of subdural hematomas, and can provide a technical basis for continuous wearable subdural hematoma monitoring equipment.

Characterization of a Time-Resolved Diffuse Optical Spectroscopy Prototype Using Low-Cost, Compact Single Photon Avalanche Detectors for Tissue Optics Applications

Time-resolved diffuse optical spectroscopy (TR-DOS) is an increasingly used method to determine the optical properties of diffusive media, particularly for medical applications including functional brain, breast and muscle measurements. For medical imaging applications, important features of new generation TR-DOS systems are low-cost, small size and efficient inverse modeling. To address the issues of low-cost, compact size and high integration capabilities, we have developed free-running (FR) single-photon avalanche diodes (SPADs) using 130 nm silicon complementary metal-oxide-semiconductor (CMOS) technology and used it in a TR-DOS prototype. This prototype was validated using assessments from two known protocols for evaluating TR-DOS systems for tissue optics applications. Following the basic instrumental performance protocol, our prototype had sub-nanosecond total instrument response function and low differential non-linearity of a few percent. Also, using light with optical power lower than the maximum permissible exposure for human skin, this prototype can acquire raw data in reflectance geometry for phantoms with optical properties similar to human tissues. Following the MEDPHOT protocol, the absolute values of the optical properties for several homogeneous phantoms were retrieved with good accuracy and linearity using a best-fitting model based on the Levenberg-Marquardt method. Overall, the results of this study show that our silicon CMOS-based SPAD detectors can be used to build a multichannel TR-DOS prototype. Also, real-time functional monitoring of human tissue such as muscles, breasts and newborn heads will be possible by integrating this detector with a time-to-digital converter (TDC).