Tunable liquid-crystal microshell-laser based on whispering-gallery modes and photonic band-gap mode lasing

Local chiral inversion of chiral nematic liquid crystals in cylinders

On the basis of Landau-de Gennes theory and the finite-difference iterative method, the autonomic modulation of chiral inversion in a cylindrical cavity with degenerate planar anchoring is investigated. Under the applied helical twisting power (inversely related to the pitch P), a chiral inversion can be achieved due to the nonplanar geometry effect, and the inversion capacity rises with the increase of the helical twisting power. The combined effect of the saddle-splay K_{24} contribution (corresponding to the L_{24} term in Landau-de Gennes theory) and the helical twisting power are analyzed. It is found that the chiral inversion is more strongly modulated on the condition that the chirality of spontaneous twist is opposite to that of applied helical twisting power. Further, larger values of K_{24} will induce larger modulation of the twist degree and smaller modulation of the inverted region. The autonomic modulation of chiral inversion shows great potential for chiral nematic liquid crystal materials to be used in smart devices, such as light-controlled switches and nanoparticle transporters.

Liquid Crystal Droplet-Based Biosensors: Promising for Point-of-Care Testing

The development of biosensing platforms has been impressively accelerated by advancements in liquid crystal (LC) technology. High response rate, easy operation, and good stability of the LC droplet-based biosensors are all benefits of the long-range order of LC molecules. Bioprobes emerged when LC droplets were combined with biotechnology, and these bioprobes are used extensively for disease diagnosis, food safety, and environmental monitoring. The LC droplet biosensors have high sensitivity and excellent selectivity, making them an attractive tool for the label-free, economical, and real-time detection of different targets. Portable devices work well as the accessory kits for LC droplet-based biosensors to make them easier to use by anyone for on-site monitoring of targets. Herein, we offer a review of the latest developments in the design of LC droplet-based biosensors for qualitative target monitoring and quantitative target analysis.

Ultra-low sample consumption consecutive-detection method for biochemical molecules based on a whispering gallery mode with a liquid crystal microdroplet

Ultra-low sample consumption detection has many applications in molecular biology, bioanalytical chemistry, and medical science. In this Letter, a novel, to the best of our knowledge, simple type of ultra-low sample consumption detection method based on a whispering gallery mode is proposed as a means to realize consecutive detection with a liquid crystal (LC) microdroplet for biochemical molecule detection, using deoxyribonucleic acid (DNA) as a model biomarker. The sensor consists of a 105-µm-core multimode fiber fused with a hollow capillary tube, with the LC microdroplet suspended stably in the testing solution. Its application to the detection of salmon sperm DNA yielded an adjustable measurement range of 3.75-11.25 μg/ml and a sensitivity of 0.33 nm/µg/ml. The test solution required as little as 3 nl of the sample, and the limit of detection was 1.32 µg/ml, which corresponds to the effective detection of as little as 3.96 pg of DNA. This method has great potential for application in the ultra-low sample consumption detection of biochemical molecules.

Multimode Robust Lasing in a Dye-Doped Polymer Layer Embedded in a Wedge-Shaped Cholesteric

Cholesteric liquid crystals (CLCs) with induced defects are one of the most prominent materials to realize compact, low-threshold and tunable coherent light sources. In this context, the investigation of optical properties of induced defect modes in such CLCs is of great interest. In particular, many studies have been devoted to the spectral control of the defect modes depending on their thickness, optical properties, distribution along the CLC, etc. In this paper, we investigate the lasing possibilities of a dye-doped polymer layer embedded in a wedge-shaped CLC. We show that multimode laser generation is possible due to the observed multiple defect modes in the PBG that enlarges the application range of the system. Furthermore, our simulations based on a Berreman 4 × 4 matrix approach for a wide range of CLC thickness show both periodic and continuous generation of defect modes along particular spectral lines inside the PBG. Such a robust spectral behaviour of induced defect modes is unique, and, to our knowledge, is not observed in similar CLC-based structures.

Distributed Feedback Laser Based on Tunable Photonic Hypercrystal

In this work, we investigate the generation of light in a distributed feedback (DFB) laser composed of periodically arranged layers of hyperbolic medium and active material forming a 1D photonic hypercrystal (PHC). The scope of our study covers the analysis of laser action in the presence of different types of dispersion that are achievable in a hyperbolic medium. Using the example of a PHC structure consisting of graphene-based hyperbolic medium, we demonstrate the possibility of controlling laser action by tuning effective dispersion. Our analysis reveals the possibility of obtaining a single-frequency generation with high side-mode suppression and controllable wavelength of operation. Moreover, we present a new mechanism for the modulation of laser amplitude arising from voltage-controllable dispersion of hyperbolic medium.

Thermo-optic tuning of a nematic liquid crystal-filled capillary whispering gallery mode resonator

A novel tunable whispering gallery modes (WGMs) resonator based on a nematic liquid crystal (LC)-filled capillary and magnetic nanoparticles (MNPs)-coated tapered fiber has been proposed and experimentally demonstrated. Thermo-optic tuning of the WGM resonances has been demonstrated by varying optical pump laser power injected into the MNPs-coated fiber half-taper inside the capillary. The tuning mechanism relies on the change of the effective refractive index (RI) of the nematic LC, caused by the photo-thermal effect of MNPs on the surface of the fiber half-taper inducing a temperature change inside the capillary. Tuning of the WGM resonances with sensitivities of 101.5 ± 3.5 pm/mW and 146.5 ± 3.5 pm/mW and tuning ranges of 1.96 nm and 3.28 nm respectively for the two types of liquid crystals (MLC-7012, MDA-05-2782) has been demonstrated. In addition, the relationship between the optical power of the pump laser and the local temperature of the nematic LC was investigated and the heating rate is estimated as 1.49 °C/mW. The proposed thermo-optic tuning scheme has many potential applications in tunable photonic devices and sensors.

Optical fiber sensor based on a cholesteric liquid crystal film for mixed VOC sensing

This paper proposes a novel cholesteric liquid crystal (CLC) film-based dual-probe fiber sensor to monitor volatile organic compound (VOC) gas. The sensor consists of a 2×2 multimode fiber coupler, in which the two output fiber ends are covered by two types of CLC films (CLCF) with different pitches. It can be observed that the reflection peak wavelengths of CLCs shift to the red side as the VOC gas concentration increases. The sensitivities of the two CLCFs are 8.435 nm·L/mmol and 14.867 nm·L/mmol to acetone, 14.586 nm·L/mmol and 29.303 nm·L/mmol to ethanol, respectively. In addition, the dependence of the peak wavelength shift of CLCF on the total concentration of the acetone and ethanol mixed gas at different mixing ratios is measured. The linear relationships between the peak shift of CLCFs, the total mixed gas concentration and acetone/ethanol ratio are calculated using the least-squares method. Therefore, this proposed dual-probe fiber optic sensor can distinguish the concentrations of acetone and ethanol in a mixed gas of acetone and ethanol.

Fiber micro-tip temperature sensor based on cholesteric liquid crystal

This Letter proposes and demonstrates a novel, miniature fiber-tip temperature sensor with a tapered hollow capillary tube (HCT) filled with glycerin and dye-doped cholesteric liquid crystal (CLC). The function of glycerin is to provide a surface anchoring force to control the uniform orientation of CLC molecules, so that the CLC in the tapered HCT can be considered as a mirrorless photonic bandgap (PBG) microcavity. An unambiguously identifiable PBG mode single peak appears in the emission spectra of the sensor. The CLC-based fiber-tip temperature sensor has a temperature sensitivity of -9.167nm/^∘C, and the figure of merit can reach 67.4^∘C^-1. This sensor offers key features and advantages, including compactness, unambiguous identifiability, and biocompatibility, which can satisfy requirements of temperature measurement in various temperature sensing application fields and has great potential for biochemical detection at cell level. In addition, the CLC was integrated into the optical fiber terminal, and the PBG mode is excited, collected and transmitted by the multimode fiber coupler, which is reported for the first time, to the best of our knowledge.

Liquid-crystal based Fabry-Perot interferometer displacement sensor

A Fabry-Perot interferometer displacement sensor is proposed and demonstrated. This sensor is prepared by inserting two ceramic ferrules into a polydimethylsiloxane (PDMS) hose to generate a Fabry-Perot cavity. The cavity is filled with nematic liquid crystals (NLCs), which induce a Vernier effect due to the birefringence of NLCs. The flexible PDMS hose makes the cavity length adjustable. A displacement sensor with sensitivity of ∼2.97  nm/μm and a dynamic range of 0.9 mm at the center wavelength of 1550 nm is experimentally demonstrated.

High-sensitivity Fabry-Perot interferometer temperature sensor probe based on liquid crystal and the Vernier effect

A novel high-sensitivity Fabry-Perot (FP) interferometer temperature sensor based on liquid crystals (LCs) and the Vernier effect is proposed and demonstrated in this Letter. This sensor is prepared by inserting two cleaved single-mode fibers into a section of a capillary tube to generate an FP cavity. The cavity is filled with LCs, which induces a Vernier effect due to the birefringence of LCs. The refractive indices of the ordinary and extraordinary light have different responses to the temperature changes. As a result, the temperature sensitivity is significantly improved by detecting the peak shifts of a periodic envelope. The experimental results show that the proposed sensor can provide a high-temperature sensitivity of 19.55 nm/°C. This sensor offers key features and advantages of the Fabry-Perot interferometer, including low cost and good fringe visibility. Furthermore, such a sensor probe can meet different requirements of temperature sensing in various application areas by using different kinds of LCs.