Filamentary anemometry using femtosecond laser-extended electric discharge - FALED

Equivalence Ratio Measurements in CH4/Air Gases Based on the Spatial Distribution of the Emission Intensity of Femtosecond Laser-Induced Filament

Femtosecond lasers have been used in combustion diagnostics. Based on the characteristics of femtosecond laser filamentation, many diagnostic techniques have been developed. Here, we propose a method, based on femtosecond laser filamentation, for equivalence ratio measurements in CH4/air gases. By measuring the spatially resolved spectra of the femtosecond laser-induced filament, we found that the variation of the equivalence ratio in the flow field would affect the spatial distribution of the emission intensity of femtosecond laser-induced filament. On this basis, the equivalence ratio was calibrated by using the relative spatial positions of N2 (337 nm) and C2 (516.5 nm) signals in the filament. This method overcomes the interference of local air disturbance, having lower measurement uncertainty.

Signal-enhanced and bi-directional interferometric Rayleigh scattering velocimetry using an asymmetry cavity

Interferometric Rayleigh scattering technique is commonly employed to measure single-point velocity fluctuation and its standard deviation in a high-speed flow due to many benefits, such as high accuracy, easy data interpretation, and high sampling rate. However, this technique suffers from a severe problem often referred to as the weak Rayleigh scattering signal, especially in the supersonic and hypersonic flow with an extremely low gas molecule density. An asymmetry cavity structure that could cost-effectively improve the Rayleigh scattering (RS) signal of interest is designed and used in the interferemetric Rayleigh scattering technique. The ZEMAX simulations suggest that the parallel beam can be repeatedly reflected in the resonant cavity and can be focused in a measurement region with the order of 0.67 mm×1.31 mm. The number of propagating rays inside the cavity can reach about 50. The fidelity of this proposed cavity is then verified by the Rayleigh scattering imaging experiments. Results show that this cavity allows the laser beam to reflect several times in the resonant cavity, and the RS signal intensity in the major axis can be 10.4 times larger than that of the incident laser. The cavity is finally employed under realistic supersonic flow velocity measurements, where the results conclusively illustrate that the Rayleigh scattering signal of interest in a single direction can be improved by a factor of 4∼5. In addition, the bi-directional (both the axial and radial directions) velocity parameters can also be obtained simultaneously. The axial velocity and its standard deviation are similar to conventional single-line ones.

A Review of Femtosecond Laser-Induced Emission Techniques for Combustion and Flow Field Diagnostics

The applications of femtosecond lasers to the diagnostics of combustion and flow field have recently attracted increasing interest. Many novel spectroscopic methods have been developed in obtaining non-intrusive measurements of temperature, velocity, and species concentrations with unprecedented possibilities. In this paper, several applications of femtosecond-laser-based incoherent techniques in the field of combustion diagnostics were reviewed, including two-photon femtosecond laser-induced fluorescence (fs-TPLIF), femtosecond laser-induced breakdown spectroscopy (fs-LIBS), filament-induced nonlinear spectroscopy (FINS), femtosecond laser-induced plasma spectroscopy (FLIPS), femtosecond laser electronic excitation tagging velocimetry (FLEET), femtosecond laser-induced cyano chemiluminescence (FLICC), and filamentary anemometry using femtosecond laser-extended electric discharge (FALED). Furthermore, prospects of the femtosecond-laser-based combustion diagnostic techniques in the future were analyzed and discussed to provide a reference for the relevant researchers.

Enhancement of femtosecond laser-induced plasma fluorescence using a nanosecond laser

We demonstrate the enhancement of femtosecond (fs) laser-induced filaments in air and nitrogen flow fields using a nanosecond (ns) laser. With the ns laser being imposed on the filaments, the length and the emission intensity of the filaments were largely increased. Temporally resolved spectra of the enhanced filaments were obtained. The results show that the ns laser enhanced the short-lifetime fluorescence of nitrogen, which comes from the transition processes of N₂ ⁺(B²Σ_u ⁺ - X²Σ_g ⁺), N₂(B³П_g - A³Σ_u ⁺) and N₂(C³П_u - B³П_g). However, it had little effect on the long-lifetime chemiluminescence, which mainly comes from reactions such as N₂(A³Σ_u ⁺) + N₂(A³Σ_u ⁺) → N₂(X¹Σ_g ⁺, v = 0) + N₂(B³П_g). A possible explanation of this phenomenon is given, and this phenomenon might have potential applications in instantaneous one-dimensional measurements of various species in gas flow fields.