Microcavities with suspended subwavelength structured mirrors

Narrow-linewidth Fano microcavities with resonant subwavelength grating mirror

We report on the theoretical and experimental investigations of optical microcavities consisting in the plane-plane arrangement of a broadband high-reflectivity mirror and a suspended one-dimensional grating mirror possessing a high-quality factor Fano resonance. By varying the length of these cavities from the millimeter to the few-micron range, we observe at short lengths the reduction of the spectral linewidth predicted to occur for such a Fano cavity as compared to a conventional broadband mirror cavity with the same length and internal losses. Such narrow linewidth and small modevolume microcavities with high-mechanical quality ultrathin mirrors will be attractive for a wide range of applications within optomechanics and sensing.

Integrated microcavity optomechanics with a suspended photonic crystal mirror above a distributed Bragg reflector

Increasing the interaction between light and mechanical resonators is an ongoing endeavor in the field of cavity optomechanics. Optical microcavities allow for boosting the interaction strength through their strong spatial confinement of the optical field. In this work, we follow this approach by realizing a sub-wavelength-long, free-space optomechanical microcavity on-chip fabricated from an (Al,Ga)As heterostructure. A suspended GaAs photonic crystal mirror is acting as a highly reflective mechanical resonator, which together with a distributed Bragg (DBR) reflector forms an optomechanical microcavity. We demonstrate precise control over the microcavity resonance by change of the photonic crystal parameters. We find that the microcavity mode can strongly couple to the transmissive modes of the DBR. The interplay between the microcavity mode and a guided resonance of the photonic crystal modifies the cavity response and results in a stronger dynamical backaction on the mechanical resonator compared to conventional optomechanical dynamics.

Spectral response of vibrational polaritons in an optomechanical cavity

Vibrational strong coupling provides a convenient way to modify the energy of molecular vibrations and to explore controlling chemical reactivity. In this work, we theoretically report the various vibrational anharmonicities that modulate the dynamics of optomechanically coupled W(CO)6-cavity. The optomechanical free-space cavity consists of movable photonic crystal (PhC) membrane, which creates the photonic bound states to interact with the molecular vibration. This coupled system is used for realizing strong optomechanical dispersive or dissipative type coupling, which provides a platform to explore the new regimes of the optomechanical interaction. The addition of different strong coupling and mechanical (nuclear) anharmonicities to the optical cavity establishes the modified splitting dynamics in the absorption spectrum and shows that the ground-state bleach of coupled W(CO)6- cavity has a broad, multisigned spectral response. This work points out the possibility of systematic and predictive modification of the multimode spectroscopy of optomechanical W(CO)6-cavity polariton system.

Polarization-independent optical spatial differentiation with a doubly-resonant one-dimensional guided-mode grating

We report on the design and experimental characterization of a suspended silicon nitride subwavelength grating possessing a polarization-independent guided-mode resonance at oblique incidence. At this resonant wavelength we observe that the transverse intensity profile of the transmitted beam is consistent with a first-order spatial differentiation of the incident beam profile in the direction of the grating periodicity, regardless of the incident light polarization. These observations are corroborated by full numerical simulations. The simple one-dimensional and symmetric design, combined with the thinness and excellent mechanical properties of these essentially loss-free dieletric films, is attractive for applications in optical processing, sensing and optomechanics.

Collimation and finite-size effects in suspended resonant guided-mode gratings

The optical transmission of resonant guided-mode gratings patterned on suspended silicon nitride thin films and illuminated at normal incidence with a Gaussian beam is investigated both experimentally and theoretically. Effects due to the beam focusing and its finite size are accounted for by a phenomenological coupled-mode model whose predictions are found to be in very good agreement with the experimentally measured spectra for various grating structures and beam sizes, and which allow for a detailed analysis of the respective magnitude of these effects. These results are highly relevant for the design and optimization of such suspended structured films that are widely used for photonics, sensing, and optomechanics applications.

Optical spatial differentiation with suspended subwavelength gratings

We investigate first- and second-order spatial differentiation of an optical beam transverse profile using guided-mode resonances in thin, suspended subwavelength gratings. Highly reflective one-dimensional gratings are patterned on freestanding 200 nm-thick silicon nitride membranes using Electron Beam Lithography and plasma etching. The optical transmission of these gratings, designed for illumination with either TM or TE polarized light, are experimentally measured under normal and oblique incidence and found to be in excellent agreement with the predictions of an analytical coupled-mode model as well as Rigorous Coupled Wave Analysis numerical simulations. Intensity profiles consistent with high quality first- and second-order spatial differentiation of a Gaussian beam are observed in transmission at oblique and normal incidence, respectively. Such easy-to-fabricate, ultrathin and loss-free optical components may be attractive for beam shaping and optical information processing and computing.

Stress-Controlled Frequency Tuning and Parametric Amplification of the Vibrations of Coupled Nanomembranes

Noninvasive tuning of the mechanical resonance frequencies of suspended parallel nanomembranes in various monolithic arrays is achieved by piezoelectric control of their tensile stress. Parametric amplification of their thermal fluctuations is shown to be enhanced by the piezoelectric actuation and amplification factors of up to 20 dB in the sub-parametric oscillation threshold regime are observed.

Cavity Quantum Electrodynamics with Frequency-Dependent Reflectors

We present a general framework for cavity quantum electrodynamics with strongly frequency-dependent mirrors. The method is applicable to a variety of reflectors exhibiting sharp internal resonances as can be realized, for example, with photonic-crystal mirrors or with two-dimensional atomic arrays around subradiant points. Our approach is based on a modification of the standard input-output formalism to explicitly include the dynamics of the mirror's internal resonance. We show how to directly extract the interaction parameters from the comparison with classical transfer matrix theory and how to treat the non-Markovian dynamics of the cavity field mode introduced by the mirror's internal resonance. As an application within optomechanics, we illustrate how a non-Markovian Fano-resonance cavity with a flexible photonic-crystal mirror can provide both sideband resolution as well as strong heating suppression in optomechanical cooling. This approach, amenable to a wide range of systems, opens up possibilities for using hybrid frequency-dependent reflectors in cavity quantum electrodynamics for engineering novel forms of light-matter interactions.