Wideband, high-resolution terahertz spectroscopy by light-induced frequency tuning of quantum-cascade lasers

Frequency stabilization of a terahertz quantum-cascade laser to the Lamb dip of a molecular absorption line

We demonstrate the frequency stabilization of a terahertz quantum-cascade laser (QCL) to the Lamb dip of the absorption line of a D₂O rotational transition at 3.3809309 THz. To assess the quality of the frequency stabilization, a Schottky diode harmonic mixer is used to generate a downconverted QCL signal by mixing the laser emission with a multiplied microwave reference signal. This downconverted signal is directly measured by a spectrum analyzer showing a full width at half maximum of 350 kHz, which is eventually limited by high-frequency noise beyond the bandwidth of the stabilization loop.

Deep learning control of THz QCLs

Artificial neural networks are capable of fitting highly non-linear and complex systems. Such complicated systems can be found everywhere in nature, including the non-linear interaction between optical modes in laser resonators. In this work, we demonstrate artificial neural networks trained to model these complex interactions in the cavity of a Quantum Cascade Random Laser. The neural networks are able to predict modulation schemes for desired laser spectra in real-time. This radically novel approach makes it possible to adapt spectra to individual requirements without the need for lengthy and costly simulation and fabrication iterations.

All-optical adaptive control of quantum cascade random lasers

Spectral fingerprints of molecules are mostly accessible in the terahertz (THz) and mid-infrared ranges, such that efficient molecular-detection technologies rely on broadband coherent light sources at such frequencies. If THz Quantum Cascade Lasers can achieve octave-spanning bandwidth, their tunability and wavelength selectivity are often constrained by the geometry of their cavity. Here we introduce an adaptive control scheme for the generation of THz light in Quantum Cascade Random Lasers, whose emission spectra are reshaped by applying an optical field that restructures the permittivity of the active medium. Using a spatial light modulator combined with an optimization procedure, a beam in the near infrared (NIR) is spatially patterned to transform an initially multi-mode THz random laser into a tunable single-mode source. Moreover, we show that local NIR illumination can be used to spatially sense complex near-field interactions amongst modes. Our approach provides access to new degrees of freedom that can be harnessed to create broadly-tunable sources with interesting potential for applications like self-referenced spectroscopy.

Tunable quantum cascade lasers can enable applications in multiple areas. Here, the authors demonstrate the adaptive control of the modes and emission spectra of quantum cascade random lasers through a spatially-tailored optical modulation of the active region.

Terahertz photonic integrated circuit for frequency tuning and power modulation

The quantum cascade laser is a powerful solid-state source of terahertz-frequency radiation. However, integrating multiple photonic functions into a monolithic platform in this frequency range is non-trivial due to the scaling of photonic structures for the long terahertz wavelengths and the low frequency tuning coefficients of the quantum cascade lasers. Here, we have designed a simple terahertz-frequency photonic integrated circuit by coupling a racetrack resonator with a ridge laser in the longitudinal direction to design a notch filter. The transmission properties of this filter structure are dependent on the phase matching and losses in the coupled racetrack and results in a comb of stopband frequencies. We have optimized the comb separation by carefully selecting the cavity dimensions of the racetrack resonator to suppress longitudinal modes in the ridge laser enabling single-mode emission. The emission frequencies and output power from laser are controlled through appropriate control of drive currents to the ridge and the racetrack resonator. The emission frequency is electrically tuned over ∼81 GHz exploiting Stark shift of the gain as a function of drive current at the ridge laser, coinciding with an output power variation of ∼27% of the peak power (at a heat sink temperature of 50 K). The output power from the ridge also varied by ∼30% and the frequency was tuned by a further 10 GHz when the driving conditions at the ridge laser are invariant and the current at the racetrack resonator was varied. To our best knowledge, this is the first report of a frequency engineering, tuning and power modulation of terahertz-frequency quantum cascade lasers using a photonic integrated circuit.

Frequency and power stabilization of a terahertz quantum-cascade laser using near-infrared optical excitation

We demonstrate a technique to simultaneously stabilize the frequency and output power of a terahertz quantum-cascade laser (QCL). This technique exploits frequency and power variations upon near-infrared illumination of the QCL with a diode laser. It does not require an external terahertz optical modulator. By locking the frequency to a molecular absorption line, we obtain a long-term (one-hour) linewidth of 260 kHz (full width at half maximum) and a root-mean-square power stability below 0.03%. With respect to the free-running case, this stabilization scheme improves the frequency stability by nearly two orders of magnitude and the power stability by a factor of three.