Correction of Fabry-Pérot interference effects in phase and amplitude pulse shapers based on liquid crystal spatial light modulators

Femtosecond Laser Direct Writing of Flexible Electronic Devices: A Mini Review

By virtue of its narrow pulse width and high peak power, the femtosecond pulsed laser can achieve high-precision material modification, material additive or subtractive, and other forms of processing. With additional good material adaptability and process compatibility, femtosecond laser-induced application has achieved significant progress in flexible electronics in recent years. These advancements in the femtosecond laser fabrication of flexible electronic devices are comprehensively summarized here. This review first briefly introduces the physical mechanism and characteristics of the femtosecond laser fabrication of various electronic microdevices. It then focuses on effective methods of improving processing efficiency, resolution, and size. It further highlights the typical progress of applications, including flexible energy storage devices, nanogenerators, flexible sensors, and detectors, etc. Finally, it discusses the development tendency of ultrashort pulse laser processing. This review should facilitate the precision manufacturing of flexible electronics using a femtosecond laser.

Targeted generation of complex temporal pulse profiles

A targeted shaping of complex femtosecond pulse waveforms and their characterization is essential for many spectroscopic applications. A 4f pulse shaper combined with an advanced pulse characterization technique should, in the idealized case, serve this purpose for an arbitrary pulse shape. This is, however, violated in the real experiment by many imperfections and limitations. Although the complex waveform generation has been studied in-depth, the comparison of the effects of various experimental factors on the actual pulse shape has stayed out of focus so far. In this paper, we present an experimental study on the targeted generation and retrieval of complex pulses by using two commonly-used techniques: spatial-light-modulator (SLM)-based 4f pulse shaper and second-harmonic generation frequency-resolved optical gating (FROG) and cross-correlation FROG (XFROG). By combining FROG and XFROG traces, we analyze the pulses with SLM-adjusted complex random phases ranging from simple to very complex waveforms. We demonstrate that the combination of FROG and XFROG ensures highly consistent pulse retrieval, irrespective of the used retrieval algorithm. This enabled us to evaluate the role of various experimental factors on the agreement between the simulated and actual pulse shape. The factors included the SLM pixelation, SLM pixel crosstalk, finite laser focal spot in the pulse shaper, or interference fringes induced by the SLM. In particular, we observe that including the SLM pixelation and crosstalk effect significantly improved the pulse shaping simulation. We demonstrate that the complete simulation can faithfully reproduce the pulse shape. Nevertheless, even in this case, the intensity of individual peaks differs between the retrieved and simulated pulses, typically by 10–20% of the peak value, with the mean standard deviation of 5–9% of the maximum pulse intensity. We discuss the potential sources of remaining discrepancies between the theoretically expected and experimentally retrieved pulse.

Calibration of the pixel crosstalk in spatial light modulators for 4f pulse shaping

The targeted shaping of femtosecond pulses in 4f pulse shapers is complicated by, among other factors, the crosstalk between adjacent pixels of a spatial light modulator (SLM). Current methods for the crosstalk evaluation require setting up a different experiment, which is highly inconvenient. Here, we propose a simple procedure to extract the pixel crosstalk within the standard SLM calibration used in pulse shaping. The calibration is based on an analysis of the contrast of a periodic modulation in the spectra induced via SLM. We demonstrate the calibration procedure on a liquid-crystal-based SLM and show that we attain a constant crosstalk effect represented by a Gaussian function with σ=1.0 pix over a broad operational range of the SLM.

Generation and compression of 10-fs deep ultraviolet pulses at high repetition rate using standard optics

The generation and characterization of ultrashort laser pulses in the deep ultraviolet spectral region is challenging, especially at high pulse repetition rates and low pulse energies. Here, we combine achromatic second harmonic generation and adaptive pulse compression for the efficient generation of sub-10 fs deep ultraviolet laser pulses at a laser repetition rate of 200 kHz. Furthermore, we simplify the pulse compression scheme and reach pulse durations of ≈10 fs without the use of adaptive optics. We demonstrate straight-forward tuning from 250 to 320 nm, broad pulse spectra of up to 63 nm width, excellent stability and a high robustness against misalignment. These features make the approach appealing for numerous spectroscopy and imaging applications.

Coherent 2D electronic spectroscopy with complete characterization of excitation pulses during all scanning steps

Coherent two-dimensional (2D) electronic spectroscopy has become a standard tool in ultrafast science. Thus it is relevant to consider the accuracy of data considering both experimental imperfections and theoretical assumptions about idealized conditions. It is already known that chirped excitation pulses can affect 2D line shapes. In the present work, we demonstrate performance-efficient, automated characterization of the full electric field of each individual multipulse sequence employed during a 2D scanning procedure. Using Fourier-transform spectral interferometry, we analyze how the temporal intensity and phase profile varies from scanning step to scanning step and extract relevant pulse-sequence parameters. This takes into account both random and systematic variations during the scan that may be caused, for example, by femtosecond pulse-shaping artifacts. Using the characterized fields, we simulate and compare 2D spectra obtained with idealized and real shapes obtained from an LCD-based pulse shaper. Exemplarily, we consider fluorescence of a molecular dimer and multiphoton photoemission of a plasmonic nanoslit. The deviations from pulse-shaper artifacts in our specific case do not distort strongly the population-based multidimensional data. The characterization procedure is applicable to other pulses-shaping technologies or excitation geometries, including also pump-probe geometry with multipulse excitation and coherent detection, and allows for accurate consideration of realistic optical excitation fields at all inter-pulse time-delays.