Fluorescent incandescent light sources from individual quadrilateral ZnO microwire via Ga-incorporation

Dynamically regulated electroluminescence via strain engineering

Dynamic regulation of the light-emission wavelength has important scientific significance for developing new electroluminescent devices and expanding the application scope to the fields of lighting, display, sensing, and human-machine interaction. In this work, an electroluminescent device with a dynamically tunable emission wavelength is achieved based on the piezoresistive effect. The tunable range can reach up to 12 nm as the external strain increases from 0% to 0.148%. Also, the luminescence mechanism of the device is systematically analyzed, and is shown to be mainly due to the transition of electrons in the ground state to the excitation state caused by thermal tunneling excitation with the participation of multi-phonons. The shift of the emission wavelength originates from the narrowing of the energy band structure under the tensile strain and the change of the crystal field around the defect centers. This work provides a new, to the best of our knowledge, strategy for the development of wavelength-tunable light-emitting devices.

Electron-hole plasma Fabry-Perot lasing in a Ga-incorporated ZnO microbelt via Ag nanoparticle deposition

In this work, individual ZnO via Ga-doped (ZnO:Ga) microbelts with excellent crystallinity and smooth facets can enable the realization of lateral microresonator Fabry-Perot (F-P) microlasers, and the F-P lasing action originates from excitonic state. Interestingly, introducing Ag nanoparticles (AgNPs) deposited on the microbelt can increase F-P lasing characteristics containing a lower threshold and enhanced lasing output. Especially for the large size AgNPs (the diameter d is approximately 200 nm), the lasing features also exhibit a significant redshift of each lasing peak and an observable broadening of the spectral line width with an increase of the excitation fluence. And the remarkable lasing characteristics are belonging to the electron-hole plasma (EHP) luminescence. The behavior and dynamics of the stimulated radiation in an AgNPs@ZnO:Ga microbelt are studied, suggesting the Mott-transition from the excitonic state to EHP state that is responsible for the F-P lasing. These features can be attributed to the working mechanism that the hot electrons created by the large size AgNPs through nonradiative decay can fill the conduction band of nearby ZnO:Ga, leading to a downward shift of the conduction band edge. This novel filling influence can facilitate bandgap renormalization and result in EHP emission. The results provide a comprehensive understanding of the transition between excitonic and EHP states in the stimulated emission process. More importantly, it also can provide new scheme to developing high efficiency and ultra-low threshold microlasing diodes.

Plasmon-enabled spectrally narrow ultraviolet luminescence device using Pt nanoparticles covered one microwire-based heterojunction

Owing to great luminescent monochromaticity, high stability, and independent of automatic color filter, low dimensional ultraviolet light-emitting diodes (LEDs) via the hyperpure narrow band have attracted considerable interest for fabricating miniatured display equipments, solid state lighting sources, and other ultraviolet photoelectrical devices. In this study, a near-ultraviolet LED composed of one Ga-doped ZnO microwire (ZnO:Ga MW) and p-GaN layer was fabricated. The diode can exhibit bright electroluminescence (EL) peaking at 400.0 nm, with a line width of approximately 35 nm. Interestingly, by introducing platinum nanoparticles (PtNPs), we achieved an ultraviolet plasmonic response; an improved EL, including significantly enhanced light output; an observed blueshift of main EL peaks of 377.0 nm; and a reduction of line width narrowing to 10 nm. Working as a powerful scalpel, the decoration of PtNPs can be employed to tailor the spectral line profiles of the ultraviolet EL performances. Also, a rational physical model was built up, which could help us study the carrier transportation, recombination of electrons and holes, and dynamic procedure of luminescence. This method offers a simple and feasible way, without complicated fabricating technology such as an added insulating layer or core shell structure, to realize hyperpure ultraviolet LED. Therefore, the proposed engineering of energy band alignment by introducing PtNPs can be employed to build up high performance, high spectral purity luminescent devices in the short wavelengths.

Continuous-wave operation of an electrically pumped single microribbon based Fabry-Perot microlaser

Fabry-Perot (FP) mode microlasers have been popularized and applied widely in on-chip coherent light sources because of the unique advantages of directional output emission. In this work, a heterojunction light-emitting diode (LED) made of a Ga-doped ZnO (ZnO:Ga) microribbon and p-GaAs template is fabricated. And its electroluminescence characteristics of strong coupling of exciton-photon and polariton lasing, in the blue-violet spectrum, were demonstrated under continuous-wave operation of an electrical injection. In the device structure, a single microribbon with a rectangular-shaped cross section can achieve the FP-mode lasing action by the optical oscillation between the two lateral sides of the microcrystals in the ultraviolet spectrum. As the reverse-current is below the threshold value, the device can have radiative polaritonic lighting directly from bilateral sides of the microribbon, yielding strong coupling between excitons and FP-mode microresonator. And the exciton-polariton coupling strengths characterized by a Rabi splitting energy were extracted to be 500 meV. Further, when the input current increased more than a certain value, strong laser illuminating developed as two sharp peaks at the lower energy shoulder of the spontaneous emission peak, and these oscillating modes can dominate the waveguide EL spectra. The experimental results can provide us with further unambiguous evidence that the lasing is originated from the polariton resonances for the microribbon with strong exciton-polariton coupling. Since single microribbon based optical FP-mode microresonators do not require additional feedback mirrors, their compact size and resulting low thresholds make them a powerful candidate to construct on-chip coherent light sources for future integrated nanophotonic and optoelectronic circuitry.

Synchrotron-based VUV excitation-induced ultrahigh quality cool white light luminescence from Sm-doped ZnO

We report that the rare-earth (RE) ion, Sm-doped ZnO, acts as white light emitting vacuum ultraviolet (VUV) phosphors and possesses an ultrahigh color rendering index (CRI) and color quality scale (CQS). The VUV-excited emission spectra measured from the synchrotron source reveal the emergence of multi-color emission bands in the visible-IR region and substantially depend on the concentration of Sm³⁺ ions. A mechanism is proposed to elucidate the origin behind the high-energy bandgap excitation of the host charge carrier and subsequent energy transfer to the Sm³⁺ states leading to additional green-yellow-orange emission bands of Sm³⁺(⁴G_5/2→⁶H_J(J=5/2,7/2,and9/2)). High-quality cool white light (correlated color temperature 5600 K) having CIE coordinates (0.33, 0.35) with a CRI as high as 95.89 and a CQS value of 94.49 is achieved for Zn_0.985Sm_0.015O under synchrotron VUV radiations. This Letter demonstrates that RE activated ZnO-based phosphors are expected to be a promising candidate in solid state lighting, as well as plasma display devices.

Homo-epitaxial secondary growth of ZnO nanowire arrays for a UV-free warm white light-emitting diode application

The warm white homojunction light-emitting diode (LED) was fabricated by a doped ZnO nanowire array homojunction with homo-epitaxial secondary grown on a GaN substrate by the chemical vapor deposition method. Due to the high quality of the nanosized ZnO homojunction, the I-V characteristic curve of the ZnO homojunction shows good pn junction rectification characteristics, and the turn-on voltage is about 6 V. Under forward bias, bright yellow light was emitting from the homojunction LED. From the electroluminescence spectrum, the main luminescence peak is divided into a small part of blue light of about 420 nm and dominated yellow-green light of about 570 nm. The CIE color space chromaticity survey shows that the chromaticity coordinates of the homojunction LED are at (0.3358, 0.3341), which indicate that fabricated white LEDs have potential applications in efficient and healthy lighting and displaying fields.

Tailoring the electroluminescence of a single microwire based heterojunction diode using Ag nanowires deposition

A single Ga-doped ZnO microwire covered by Ag nanowires (AgNWs@ZnO:Ga MW) was utilized to construct a promising ultraviolet light source, with p-GaN serving as a hole injection layer.