Robust optical frequency dissemination with a dual-polarization coherent receiver

Open-loop polarization mode dispersion mitigation for fibre-optic time and frequency transfer

The non-reciprocal and dynamic nature of polarization mode dispersion (PMD) in optical fibers can be a problem for accurate time and frequency transfer. Here, a simple, passive solution is put forward that is based on transmitting optical pulses with alternating orthogonal polarization. The fast and deterministic polarization modulation means that the PMD noise is pushed far away from the frequencies of interest. Furthermore, upon reflection from a Faraday mirror at the receiver, the pulses have a well-defined polarization when they return to the transmitter, which facilitates stable optical phase detection and fibre phase compensation. In an open-loop test setup that uses a mode-locked laser and a simple pulse interleaver, the polarization mode dispersion is shown to be reduced by more than two orders of magnitude.

Non-reciprocity in optical fiber links: experimental evidence

Fundamental limits of fiber link are set by non-reciprocal effects that violate the hypothesis of equality between forward and backward path. Non-reciprocal noise arises technically from the set-up asymmetry, and fundamentally by the Sagnac effect when the fiber link encloses a non-zero area. As a pre-requisite for observation of Sagnac effect in fiber links, we present a study on phase noise and frequency stability contributions affecting coherent optical frequency transfer in bi-directional fiber links. Both technical and fundamental limitations of Two-Way optical frequency transfer are discussed. Our model predicts and our experiments substantially verify that the dominant noise mechanism at low Fourier frequencies is the polarization asymmetry induced by the temperature and relative humidity variations impacted on fiber links. The flicker noise floor due to the non-reciprocal noise arising from polarization mode dispersion is evidenced for the first time. We perform a post-processing approach which enables us to remove this polarization noise, improve the long-term stability and remove a frequency bias. We evaluate the uncertainty contributions of all the effects discussed for our 50 km spooled fiber link, dominated by its non-reciprocal noise induced by polarization mode dispersion with uncertainty of 1.9( ± 0.8)( ± 1.2) × 10^-20. After correction, the linear drift of the residual phase is as low as 27 yoctosecond/s, leading to an uncertainty of the frequency transfer of 2.6 ( ± 39) × 10^-22, confirming its potential for searching for more fundamental effects such as Sagnac effect or transient frequency variation due to dark matter.

Performance of digital servos in an optical frequency transfer network

We demonstrate the use of three kinds of flexible digital servos for the stabilization of the optical fiber link, the interferometer temperature, and the polarization of the transmitted light at the remote site, respectively. The main fiber noise cancellation digital servo provides a large phase detection range (∼2¹⁰π radians), automatic relock function, and low cycle-slip rate over a 62 km field-deployed fiber link achieved by utilizing a feedback optical actuator of an acousto-optic modulator fed by a voltage-controlled oscillator. The temperature control and polarization control digital servos enable that the temperature of the interferometer can be stabilized at a stability of 0.01 K and the data uptime is enhanced from 85.5% to 99.9% by implementing the polarization controller. The results demonstrate that the performance of the three digital servos is sufficient for high-precision optical frequency transfer applications and indicates comparable performance to existing analog optical frequency control systems. The full digital controlled optical frequency transfer method demonstrated here provides guidance for the development of a low-cost, low-complexity, and high-reliability optical frequency transfer system.

Optical polarization-based seismic and water wave sensing on transoceanic cables

Seafloor geophysical instrumentation is challenging to deploy and maintain but critical for studying submarine earthquakes and Earth's interior. Emerging fiber-optic sensing technologies that can leverage submarine telecommunication cables present an opportunity to fill the data gap. We successfully sensed seismic and water waves over a 10,000-kilometer-long submarine cable connecting Los Angeles, California, and Valparaiso, Chile, by monitoring the polarization of regular optical telecommunication channels. We detected multiple moderate-to-large earthquakes along the cable in the 10-millihertz to 5-hertz band. We also recorded pressure signals from ocean swells in the primary microseism band, implying the potential for tsunami sensing. Our method, because it does not require specialized equipment, laser sources, or dedicated fibers, is highly scalable for converting global submarine cables into continuous real-time earthquake and tsunami observatories.