Enhancing upconversion photoluminescence by plasmonic-photonic hybrid mode

Ultrabroadband Long-Wavelength Near-Infrared MgIn2O4:Ni2+ Phosphor Synthesized via Sol-gel Combustion Method as a Light Source for Night Vision Imaging, Nonvisual Detection, and Anticounterfeiting Display

Long-wavelength near-infrared (LWNIR) imaging technology has exciting application potential across various fields due to its ability of deeper penetration and unique properties related to its emission wavelength, when compared to short-wavelength near-infrared imaging. However, the limited availability of materials for LWNIR light sources, due to the lack of suitable host materials that constitute luminescence centers, has been a major challenge and technical obstacle in realizing such applications. Here, we developed MgIn2O4:Ni2+ phosphors with an antispinel structure and LWNIR luminescence properties through a sol-gel combustion method. Under excitation at 365 nm, its emission wavelength covers the range of 1000-2000 nm, with a peak emission at approximately 1520 nm, a full width at half-maximum of ∼340 nm, and an optimized photoluminescence quantum yield of ∼21.22%, when an optimal Ni2+ doping content of 1 mol % was used. Studies on the crystal structure of MgIn2O4 have shown that Ni2+ ions preferentially replace the lattice position occupied by Mg2+ ions in the [MgO6] octahedrons, which provides a crystal field microenvironment of weak strength to the Ni2+ luminescence centers and promotes their LWNIR emission with a large Stokes shift. A LWNIR pc-LED device was assembled using the optimized MgIn2O4:Ni2+ phosphor and a near-ultraviolet LED chip (@ 365 nm), and its potential applications, including NIR night vision imaging, nonvisual detection, and anticounterfeiting displays, were demonstrated. Our results show that the antispinel MgIn2O4:Ni2+ phosphor prepared by the sol-gel combustion method is a promising LWNIR luminescence material.

Strategy of Charge Compensation for High-Performance Ni2+-Activated MgAl2O4 Spinel Near-Infrared Phosphor Synthesis via the Sol-Gel Combustion Method

Near-infrared (NIR) phosphor conversion light-emitting diodes (pc-LEDs) have great application potential as NIR light sources in many fields such as food analysis, night vision illumination, and bioimaging for noninvasive medical diagnosis. In general, phosphors synthesized by a high-temperature solid-phase method have large particle sizes and have to be processed to fine powders by a grinding process, which may introduce surface defects and lower the luminous efficiency. Here, we report a sol-gel sintering method with ammonium nitrate and citric acid as the sacrificing agents to synthesize high purity, nanosized (less than 50 nm) Zr4+/Ni2+ codoped MgAl2O4 spinel NIR phosphors, in which MgAl2O4 spinel is the matrix, Ni2+ is the luminous center, and Zr4+ acts as the charge compensator. We systematically characterized the crystal structures and NIR luminescence properties of the Ni2+-doped MgAl2O4 and the Zr4+/Ni2+ codoped MgAl2O4. Under 390 nm light excitation, the emission spectrum of the Ni2+-doped MgAl2O4 phosphor covers 900-1600 nm, the half-peak width is 251 nm, and the peak position is located at 1230 nm. We demonstrated that by incorporating small amounts of Zr4+ as the charge compensator, the NIR emission intensity of the Zr4+/Ni2+ codoped MgAl2O4 nanosized phosphor was doubled over that of the Ni2+-doped MgAl2O4 phosphor. The optimal content of the charge compensator was 2 mol %. More importantly, the inclusion of Zr4+ led to a NIR phosphor with improved thermal stability in luminous properties, and the luminous intensity measured at 100 °C was 33.83% of that measured at room temperature (20 °C). This study demonstrates that NIR phosphor nanomaterials with high-purity and enhanced optical properties can be designed and synthesized through the charge compensation strategy by a sol-gel sintering method.

Enhancing Up-Conversion Luminescence Using Dielectric Metasurfaces: Role of the Quality Factor of Resonance at a Pumping Wavelength

Photonic applications of up-conversion luminescence (UCL) suffer from poor external quantum yield owing to a low absorption cross-section of UCL nanoparticles (UCNPs) doped with lanthanide ions. In this regard, plasmonic nanostructures have been proposed for enhancing UCL intensity through strong electromagnetic local-field enhancement; however, their intrinsic ohmic loss opens additional nonradiative decay channels. Herein, we demonstrate that dielectric metasurfaces can overcome this disadvantage. A periodic array of amorphous-silicon nanodisks serves as a metasurface on which a layer of UCNPs is self-assembled. Sharp resonances supported by the metasurface overlap the absorption wavelength (λ = 980 nm) of UCNPs to excite them, resulting in the enhancement of UCL intensity. We further sharpen the resonances through rapid thermal annealing (RTA) of the metasurface, crystallizing silicon to reduce intrinsic optical losses. By optimizing the RTA condition (at 1000 °C for 20 min in N2/H2 (3 vol %) atmosphere), the resonance quality factor improves from 17.2 to 32.9, accompanied by an increase in the enhancement factor of the UCL intensity from 86- to over 600-fold. Moreover, a reduction in the intrinsic optical losses mitigates the UCL thermal quenching under a high excitation density. These findings provide a strategy for increasing light-matter interactions in nanophotonic composite systems and promote UCNP applications.

Wavelength-Dependent Metal-Enhanced Fluorescence Biosensors via Resonance Energy Transfer Modulation

Fluorescence can be enhanced or quenched depending on the distance between the surface of a metal nanoparticle and the fluorophore molecule. Fluorescence enhancement by nearby metal particles is called metal-enhanced fluorescence (MEF). MEF shows promising potential in the field of fluorescence-based biological sensing. MEF-based biosensor systems generally fall into two platform categories: (1) a two/three-dimensional scaffold, or (2) a colloidal suspension. This review briefly summarizes the application studies using wavelength-dependent carbon dots (UV-VIS), noble metals (VIS), and upconversion nanoparticles (NIR to VIS), representative nanomaterials that contribute to the enhancement of fluorescence through the resonance energy transfer modulation and then presents a perspective on this topic.

Up-to-Five-Photon Upconversion from Near-Infrared to Ultraviolet Luminescence Coupled to Aluminum Plasmonic Lattices

The incorporation of upconversion luminescence (UCL) materials into various plasmonic structures promotes light-matter interactions in nanophotonic systems. It has been experimentally demonstrated that UCL enhancement entailing two photons exhibits a quadratic dependence on the excitation intensity. However, in the field of plasmonics, there have not been sufficient studies on high-order multi-photon upconversion processes. We report up-to-five-photon UCL, wherein λ = 1550 nm near-infrared light is converted to 382 nm ultraviolet light, from core-inert shell nanoparticles coupled to aluminum plasmonic lattices. The five-photon UCL intensity of nanoparticles on the plasmonic lattice is over 800 times stronger than that on the flat glass. We demonstrate that the enhancement of UCL scales with the nth power of the local field enhancement for n-photon process. These findings give a strategy to obtain high-order multi-photon UPL with aluminum plasmonic nanostructures and can contribute to anti-counterfeiting application.

Synchronous enhancement of upconversion and NIR-IIb photoluminescence of rare-earth nanoprobes for theranostics

This study develops a multifunctional molecular optical nanoprobe (SiO₂@Gd₂O₃: Yb³⁺/Er³⁺/Li⁺@Ce6/MC540) with a unique core-satellite form. The rare-earth doped nanodots with good crystallinity are uniformly embedded on the surface of a hydrophilic silica core, and the nanoprobe can emit near-infrared-IIb (NIR-IIb) luminescence for imaging as well as visible light that perfectly matches the absorption bands of two included photosensitizers under 980 nm irradiation. The optimal NIR-IIb emission and upconversion efficiency are attainable via regulating the doping ratios of Yb³⁺, Er³⁺ and Li⁺ ions. The relevant energy transfer mechanism was addressed theoretically that underpins rare-earth photoluminescence where energy back-transfer and cross relaxation processes play pivotal roles. The nanoprobe can achieve an excellent dual-drive photodynamic treatment performance, verified by singlet oxygen detections and live-dead cells imaging assays, with a synergistic effect. And a brightest NIR-IIb imaging was attained in tumoral site of mouse. The nanoprobe has a high potential to serve as a new type of optical theranostic agent for tumor.

Surface Plasmon-Photon Coupling in Lanthanide-Doped Nanoparticles

Lanthanide-doped nanoparticles have great potential for energy conversion applications, as their optical properties can be precisely controlled by varying the doping composition, concentration, and surface structures, as well as through plasmonic coupling. In this Perspective we highlight recent advances in upconversion emission modulation enabled by coupling upconversion nanoparticles with well-defined plasmonic nanostructures. We emphasize fundamental understanding of luminescence enhancement, monochromatic emission amplification, lifetime tuning, and polarization control at nanoscale. The interplay between localized surface plasmons and absorbed photons at the plasmonic metal-lanthanide interface substantially enriches the interpretation of plasmon-coupled nonlinear photophysical processes. These studies will enable novel functional nanomaterials or nanostructures to be designed for a multitude of technological applications, including biomedicine, lasing, optogenetics, super-resolution imaging, photovoltaics, and photocatalysis.

Experimental validation of a modeling framework for upconversion enhancement in 1D-photonic crystals

Photonic structures can be designed to tailor luminescence properties of materials, which becomes particularly interesting for non-linear phenomena, such as photon upconversion. However, there is no adequate theoretical framework to optimize photonic structure designs for upconversion enhancement. Here, we present a comprehensive theoretical model describing photonic effects on upconversion and confirm the model’s predictions by experimental realization of 1D-photonic upconverter devices with large statistics and parameter scans. The measured upconversion photoluminescence enhancement reaches 82 ± 24% of the simulated enhancement, in the mean of 2480 separate measurements, scanning the irradiance and the excitation wavelength on 40 different sample designs. Additionally, the trends expected from the modeled interaction of photonic energy density enhancement, local density of optical states and internal upconversion dynamics, are clearly validated in all experimentally performed parameter scans. Our simulation tool now opens the possibility of precisely designing photonic structure designs for various upconverting materials and applications.

A theoretical framework to optimize photonic structure designs for upconversion enhancement is lacking. Here, the authors present a comprehensive theoretical model and confirm the model’s predictions by experimental realisation of 1D-photonic upconverter devices with large statistics and parameter scans.

Nanostructured Color Filters: A Review of Recent Developments

Color plays an important role in human life: without it life would be dull and monochromatic. Printing color with distinct characteristics, like hue, brightness and saturation, and high resolution, are the main characteristic of image sensing devices. A flexible design of color filter is also desired for angle insensitivity and independence of direction of polarization of incident light. Furthermore, it is important that the designed filter be compatible with the image sensing devices in terms of technology and size. Therefore, color filter requires special care in its design, operation and integration. In this paper, we present a comprehensive review of nanostructured color filter designs described to date and evaluate them in terms of their performance.

Feature issue introduction: Optical Devices and Materials for Solar Energy and Solid-state Lighting (PVLED) 2019

This special feature issue of Optics Express highlights contributions from authors who presented their latest research in the Optical Devices and Materials for Solar Energy and Solid-state Lighting (PVLED) topical meeting of the OSA Advanced Photonics Congress, held in Burlingame, California, from 29 July - August 1, 2019. This feature issue is comprised of nine contributed papers, expanding upon their respective conference proceedings to cover timely research topics applying optics and photonics to solar energy and solid-state lighting.