Hand-guided qualitative deflectometry with a mobile device

Iterative space-variant sphere-model deflectometry enabling designation-model-free measurement of the freeform surface

Freeform optics, offering high degrees of design freeform to control light propagation, have already been widely applied in various photoelectric equipment. The form quality of those optics is crucial to their opto-electronics functionalities, which requires to be measured accurately. The deflectometry is a promising technology to test the complex freeform surfaces. In general, there is a designed surface model for the monoscopic deflectometry to estimate the positions of whole measured points to solve the issue of height-slope ambiguity. However, the unknown or inaccurate surface model can induce errors into the measured normal, thereby decreasing the measurement precision. In this paper, without relying on the known surface model, the proposed method iteratively optimizes a sphere model to describe the measured surface by changing the spherical radius. In order to reduce the global error, the space-variant spheres are optimized, respectively, to estimate the whole-aperture surface coordinate. With the help of the iteration surface reconstruction process, the optimal number of the space-variant spheres is achieved to meantime obtain the final reconstructed surface. Compared to the measurements by using the plane model, the form accuracy can be improved by three times. Experiments demonstrate that the proposed method can successfully reconstruct the complex surfaces without the need of a known surface model, which can greatly improve the measuring flexibility and measurement accuracy.

Surface Measurement of a Large Inflatable Reflector in Cryogenic Vacuum

The metrology of membrane structures, especially inflatable, curved, optical surfaces, remains challenging. Internal pressure, mechanical membrane properties, and circumferential boundary conditions imbue highly dynamic slopes to the final optic surface. Here, we present our method and experimental results for measuring a 1 m inflatable reflector’s shape response to dynamic perturbations in a thermal vacuum chamber. Our method uses phase-measuring deflectometry to track shape change in response to pressure change, thermal gradient, and controlled puncture. We use an initial measurement as a virtual null reference, allowing us to compare 500 mm of measurable aperture of the concave f/2, 1-meter diameter inflatable optic. We built a custom deflectometer that attaches to the TVAC window to make full use of its clear aperture, with kinematic references behind the test article for calibration. Our method produces 500 × 500 pixel resolution 3D surface maps with a repeatability of 150 nm RMS within a cryogenic vacuum environment (T = 140 K, P = 0.11 Pa).

Robust optical axis control of monocular active gazing based on pan-tilt mirrors for high dynamic targets

The real-time and stability performance are both crucial for the active vision system (AVS) to gaze the high dynamic targets (HDTs). This study focused on the robust optical axis control mechanism of monocular AVS based on pan-tilt mirrors. We proposed an adaptive self-window to accommodate the HDTs within the region of interest. The minimum-envelope-ellipse and unscented-Kalman-filter methods were proposed to compensate and predict the angle of optical axis when the HDTs were blocked. The static and dynamic compensation error rates were less than 1.46% and 2.71%, prediction error rate was less than 13.88%, improving the gazing stability while ensuring real-time performance.

Towards self-calibrated lens metrology by differentiable refractive deflectometry

Deflectometry, as a non-contact, fully optical metrology method, is difficult to apply to refractive elements due to multi-surface entanglement and precise pose alignment. Here, we present a computational self-calibration approach to measure parametric lenses using dual-camera refractive deflectometry, achieved by an accurate, differentiable, and efficient ray tracing framework for modeling the metrology setup, based on which damped least squares is utilized to estimate unknown lens shape and pose parameters. We successfully demonstrate both synthetic and experimental results on singlet lens surface curvature and asphere-freeform metrology in a transmissive setting.

Exploiting Wavelength Diversity for High Resolution Time-of-Flight 3D Imaging

The poor lateral and depth resolution of state-of-the-art 3D sensors based on the time-of-flight (ToF) principle has limited widespread adoption to a few niche applications. In this work, we introduce a novel sensor concept that provides ToF-based 3D measurements of real world objects and surfaces with depth precision up to 35 μm and point cloud densities commensurate with the native sensor resolution of standard CMOS/CCD detectors (up to several megapixels). Such capabilities are realized by combining the best attributes of continuous wave ToF sensing, multi-wavelength interferometry, and heterodyne interferometry into a single approach. We describe multiple embodiments of the approach, each featuring a different sensing modality and associated tradeoffs.

Computational Optical Sensing and Imaging: feature issue introduction

This Feature Issue includes 19 articles that highlight advances in the field of Computational Optical Sensing and Imaging. Many of the articles were presented at the 2019 OSA Topical Meeting on Computational Optical Sensing and Imaging held in Munich, Germany, on June 24-27. Articles featured in the issue cover a broad array of topics ranging from imaging through scattering media, imaging round corners and compressive imaging to machine learning for recovery of images.