Quantitative evaluation of optical properties for defective 2D metamaterials based on diffraction imaging

Emission bandwidth control on a two-dimensional superlattice microcavity array

Narrowband thermal emission at high temperatures is required for various thermal energy systems. However, the large lossy energy of refractory metals induces a broad bandwidth emission. Here, we demonstrated a two-dimensional (2D) superlattice microcavity array on refractory metals to control the emission bandwidth. A hybrid resonance mode was obtained by coupling the standing-wave modes and propagating surface-wave modes. The bandwidth emission was controlled by varying the superlattice microcavity array resulting from the change in electric field (E-field) concentration. The quality factor (Q-factor) improved by more than 3 times compared to that of a single-lattice array. A narrower band emission originating from the hybrid mode was observed and analyzed experimentally. This novel surface-relief microstructure method can be used to control the emission bandwidth of thermal emitters used in thermophotovoltaic (TPV) systems and other high-temperature thermal energy systems.

Triangular metallic ring-shaped broadband polarization-insensitive and wide-angle metamaterial absorber for visible regime

The inherent bandwidth limitations make it quite challenging to achieve the wideband response of metamaterial absorbers. In this paper, a metamaterial absorber based on triangular metallic rings has been proposed to attain wideband absorption (>90%) in the wavelength span of 400-750 nm. The absorber is constituted of periodically placed unit cells, where each unit cell contains three concentric triangular chromium metal rings. The absorption of the design remains stable (above 70%) over a wide range of incidence obliquity (0°-60°) under transverse electric (TE) and transverse magnetic (TM) polarization. Further, the absorber shows polarization-insensitive behavior over different polarization states. The low-cost and thermally endurable chromium metal, wide absorption, and wide-angle stability make the proposed absorber a suitable candidate for applications like solar energy harvesting, solar detectors, solar thermal photovoltaics, and photonic devices.

Elliptical metallic rings-shaped fractal metamaterial absorber in the visible regime

Achieving the broadband response of metamaterial absorbers has been quite challenging due to the inherent bandwidth limitations. Herein, the investigation was made of a unique kind of visible light metamaterial absorber comprising elliptical rings-shaped fractal metasurface using tungsten metal. It was found that the proposed absorber exhibits average absorption of over 90% in the visible wavelength span of 400-750 nm. The features of perfect absorption could be observed because of the localized surface plasmon resonance that causes impedance matching. Moreover, in the context of optoelectronic applications, the absorber yields absorbance up to ~ 70% even with the incidence obliquity in the range of 0°-60° for transverse electric polarization. The theory of multiple reflections was employed to further verify the performance of the absorber. The obtained theoretical results were found to be in close agreement with the simulation results. In order to optimize the results, the performance was analyzed in terms of the figure of merit and operating bandwidth. Significant amount of absorption in the entire visible span, wide-angle stability, and utilization of low-cost metal make the proposed absorber suitable in varieties of photonics applications, in particular photovoltaics, thermal emitters and sensors.