1
|
Zhang X, Xu Y, Zhu XS, Shi YW. Surface plasmon resonance temperature sensor with tunable detection range based on a silver-coated multi-hole optical fiber. OPTICS EXPRESS 2022; 30:48091-48102. [PMID: 36558723 DOI: 10.1364/oe.478355] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2022] [Accepted: 12/05/2022] [Indexed: 06/17/2023]
Abstract
A novel surface plasmon resonance (SPR) temperature sensor based on a silver-coated multi-hole optical fiber (SMHOF) is presented. The central and surrounding air holes of the SMHOF are filled with two kinds of thermosensitive liquid with high and low refractive index (RI), respectively. Two separated resonance dips, which are related to the high and low RI filled liquid respectively, are observed at different wavelength in the transmission spectrum. Advantageously, the two dips move towards opposite direction with the temperature variation. The interval between the two SPR dips is measured under different environmental temperature and exhibits a good linearity. The proposed sensor with different detection range is fabricated by changing the RIs of the filled thermosensitive liquids. The temperature sensitivity of 7.72 nm/°C and -7.81 nm/°C is obtained in the range of 20-60 °C and -20-20 °C, respectively. Owing to the high temperature sensitivity and tunable detection range, the proposed sensor is expected to find potential applications in biomedicine, health care and environmental monitoring.
Collapse
|
2
|
Hu S, Chen J, Liang J, Luo J, Shi W, Yuan J, Chen Y, Chen L, Chen Z, Liu GS, Luo Y. Hyperbolic-Metamaterials-Based SPR Temperature Sensor Enhanced by a Nanodiamond-PDMS Hybrid for High Sensitivity and Fast Response. ACS APPLIED MATERIALS & INTERFACES 2022; 14:42412-42419. [PMID: 36070359 DOI: 10.1021/acsami.2c10084] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
A high-performance surface plasmon resonance (SPR) fiber sensor is proposed with hyperbolic metamaterials (HMMs), nanodiamonds (NDs), and polydimethylsiloxane (PDMS) to enhance the temperature sensitivity and response time. The HMM with tunable dispersion can break through the structural limitations of the optical fiber to improve the refractive index (RI) sensitivity, while NDs and PDMS with large thermo-optic coefficients enable to induce significant RI change under varied thermal fields. The ternary composite endows the sensor with a high temperature sensitivity of -9.021 nm/°C, which is 28.6 times higher than that of the conventional gold film-based SPR sensor. Furthermore, NDs with high thermal conductivity (2200 W/mK) effectively expedite the thermal response of PDMS, which reduces the response time from 80 to 6 s. It is believed that the proposed sensors with high sensitivity, fast response time, and compact size have great potential for applications in industrial production, healthcare, environmental monitoring, etc.
Collapse
Affiliation(s)
- Shiqi Hu
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
- Key Laboratory of Optoelectronic Information and Sensing Technologies of Guangdong Higher Education Institutes, Jinan University, Guangzhou 510632, China
| | - Jiayao Chen
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
| | - Junhao Liang
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
| | - Jiajia Luo
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
| | - Weicheng Shi
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
| | - Jinming Yuan
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
| | - Yaofei Chen
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
| | - Lei Chen
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
| | - Zhe Chen
- Key Laboratory of Optoelectronic Information and Sensing Technologies of Guangdong Higher Education Institutes, Jinan University, Guangzhou 510632, China
| | - Gui-Shi Liu
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
- Key Laboratory of Optoelectronic Information and Sensing Technologies of Guangdong Higher Education Institutes, Jinan University, Guangzhou 510632, China
| | - Yunhan Luo
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, College of Science and Engineering, Jinan University, Guangzhou 510632, China
| |
Collapse
|
3
|
A Novel Liquid Crystal-Filled, Dual-Core Photonic Crystal Fiber Polarization Beam Splitter Covering the E + S + C + L + U Communication Band. PHOTONICS 2021. [DOI: 10.3390/photonics8110461] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
Abstract
This paper proposes a novel liquid crystal-filled, dual core photonic crystal fiber polarization beam splitter (LC-DC-PCF PBS) based on the coupled mode theory of DC-PCF. The mode birefringence of odd and even modes, coupling lengths (CLs) of the X-polarization (X-pol) and Y-polarization (Y-pol), and the corresponding coupling length ratio (CLR) of the proposed LC-DC-PCF PBS filled without LC E7 and with LC E7 are compared. The change rules of the CLs of the X-pol and Y-pol and CLR of the proposed LC-DC-PCF with wavelengths for different cladding microstructure parameters were investigated. The relationships between the X-pol and Y-pol normalized output powers in core A of the proposed LC-DC-PCF PBS and the propagation length at the wavelength of 1.604 μm are discussed. Finally, by studying the change of extinction ratio (ER) with wavelength, the LC-DC-PCF PBS ER of 60.3 and 72.2 dB at wavelengths 1.386 and 1.619 μm are achieved, respectively. The final splitting length (LS) is 94 μm, and the splitting bandwidth is 349 nm (1.352~1.701 μm), covering the whole of the E + S + C + L + U communication bands. The proposed LC-DC-PCF PBS has good beam-splitting performance, such as ultra-short LS and ultra-wide splitting bandwidth, with potential applications in laser, sensing, and communication systems.
Collapse
|
4
|
Wang X, Deng H, Yuan L. Ultra-high sensitivity SPR temperature sensor based on a helical-core fiber. OPTICS EXPRESS 2021; 29:22417-22426. [PMID: 34266005 DOI: 10.1364/oe.428199] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/20/2021] [Accepted: 06/21/2021] [Indexed: 06/13/2023]
Abstract
A novel compact ultra-high sensitivity optical fiber temperature sensor based on surface plasmon resonance (SPR) is proposed and demonstrated. The sensor is fabricated by employing a helical-core fiber (HCF), which is polished as a D-type fiber on the helical-core region and coated with a layer of Au-film and polydimethylsiloxane (PDMS). The theoretical and experimental results show that the resonant wavelength and sensitivity of the proposed sensor can be effectively adjusted by changing the twisting pitch of HCF. Due to the high refractive index sensitivity of the sensor and the high thermo-optic coefficient of PDMS, the maximum sensitivity can reach -19.56 nm/°C at room temperature when the twist pitch of HCF is 2.1 mm. It is worth noting that the sensitivity can be further improved by using a shorter pitch of HCF. The proposed SPR temperature sensor has adjustable sensitivity, is easy to realize distributed sensing, and has potential application prospects in biomedical, healthcare, and other fields.
Collapse
|
5
|
Yi D, Liu F, Geng Y, Li X, Hong X. High-sensitivity and large-range fiber optic temperature sensor based on PDMS-coated Mach-Zehnder interferometer combined with FBG. OPTICS EXPRESS 2021; 29:18624-18633. [PMID: 34154115 DOI: 10.1364/oe.428384] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/21/2021] [Accepted: 05/25/2021] [Indexed: 06/13/2023]
Abstract
Although numerous efforts have been dedicated towards developing fiber sensors with high performances, challenges still remain in achieving high-quality temperature sensors with high sensitivity, large measurement range and high stability. This study proposes a compact fiber optic temperature sensor based on PDMS-coated Mach-Zehnder interferometer (MZI) combined with FBG, and it can realize both high-sensitivity and large-range temperature measurement. The MZI is based on Thin No-Core Fiber (TNCF) with lateral-offset. Owing to the high refractive index sensitivity of MZI and the high thermo-optic coefficient of PDMS, the sensor can achieve a high temperature sensitivity (>10 nm/°C). Besides, by optimizing the TNCF length, the cascaded FBG can be used to locate different temperature intervals in units of approximately 10 °C, and therefore the detectable temperature range is largely extended. The experimental test demonstrates that the average sensitivities of 11.19 nm/°C, 8.53 nm/°C, 7.76 nm/°C, 7.27 nm/°C are achieved at the temperature around 30 °C, 40 °C, 50 °C and 60 °C, and it shows excellent consistency and repeatability during the thermal cycle tests.
Collapse
|
6
|
Leonardi AA, Lo Faro MJ, Irrera A. Biosensing platforms based on silicon nanostructures: A critical review. Anal Chim Acta 2021; 1160:338393. [PMID: 33894957 DOI: 10.1016/j.aca.2021.338393] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/23/2020] [Revised: 03/09/2021] [Accepted: 03/10/2021] [Indexed: 12/21/2022]
Abstract
Biosensors are revolutionizing the health-care systems worldwide, permitting to survey several diseases, even at their early stage, by using different biomolecules such as proteins, DNA, and other biomarkers. However, these sensing approaches are still scarcely diffused outside the specialized medical and research facilities. Silicon is the undiscussed leader of the whole microelectronics industry, and novel sensors based on this material may completely change the health-care scenario. In this review, we will show how novel sensing platforms based on Si nanostructures may have a disruptive impact on applications with a real commercial transfer. A critical study for the main Si-based biosensors is herein presented with a comparison of their advantages and drawbacks. The most appealing sensing devices are discussed, starting from electronic transducers, with Si nanowires field-effect transistor (FET) and porous Si, to their optical alternatives, such as effective optical thickness porous silicon, photonic crystals, luminescent Si quantum dots, and finally luminescent Si NWs. All these sensors are investigated in terms of working principle, sensitivity, and selectivity with a specific focus on the possibility of their industrial transfer, and which ones may be preferred for a medical device.
Collapse
Affiliation(s)
- Antonio Alessio Leonardi
- Dipartimento di Fisica e Astronomia "Ettore Majorana", Università di Catania, Via Santa Sofia 64, 95123, Catania, Italy; CNR-IMM UoS Catania, Istituto per La Microelettronica e Microsistemi, Via Santa Sofia 64, Italy; CNR-IPCF, Istituto per I Processi Chimico-Fisici, Viale F. Stagno D'Alcontres 37, 98158, Messina, Italy
| | - Maria José Lo Faro
- Dipartimento di Fisica e Astronomia "Ettore Majorana", Università di Catania, Via Santa Sofia 64, 95123, Catania, Italy; CNR-IMM UoS Catania, Istituto per La Microelettronica e Microsistemi, Via Santa Sofia 64, Italy
| | - Alessia Irrera
- CNR-IPCF, Istituto per I Processi Chimico-Fisici, Viale F. Stagno D'Alcontres 37, 98158, Messina, Italy.
| |
Collapse
|