Highly reliable SERS substrate based on plasmonic hybrid coupling between gold nanoislands and periodic nanopillar arrays

Development of nanogap-rich hybrid gold nanostructures by use of two non-lithographic deposition techniques for a sensitive and reliable SERS biosensor

Practical application of surface-enhanced Raman spectroscopy (SERS) has suffered from several limitations by heterogeneous distribution of hot-spots, such as high signal fluctuation and the resulting low reliability in detection. Herein, we develop a strategy of more sensitive and reliable SERS platform through designing spatially homogeneous gold nanoparticles (GNPs) on a uniform gold nanoisland (GNI) pattern. The proposed SERS substrate is successfully fabricated by combining two non-lithographic techniques of electron beam evaporation and convective self-assembly. These bottom-up methods allow a simple, cost-effective, and large-area fabrication. Compared to the SERS substrates obtained from two separate nanofabrication methods, Raman spectra measured by the samples with both GNPs and GNIs present a significant increase in the signal intensity as well as a notable improvement in signal fluctuation. The simulated near-field analyses demonstrate the formation of highly amplified plasmon modes within and at the gaps of the GNP-GNI interfaces. Moreover, the suggested SERS sensor is evaluated to detect the glucose concentration, exhibiting that the detection sensitivity is improved by more than 10 times compared to the sample with only GNI patterns and a fairly good spatial reproducibility of 7% is accomplished. It is believed that our suggestion could provide a potential for highly sensitive, low-cost, and reliable SERS biosensing platforms that include many advantages for healthcare devices.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13534-024-00381-4.

A Combination of Membrane Filtration and Raman-Active DNA Ligand Greatly Enhances Sensitivity of SERS-Based Aptasensors for Influenza A Virus

Biosensors combining the ultrahigh sensitivity of surface-enhanced Raman scattering (SERS) and the specificity of nucleic acid aptamers have recently drawn attention in the detection of respiratory viruses. The most sensitive SERS-based aptasensors allow determining as low as 104 virus particles per mL that is 100-fold lower than any antibody-based lateral flow tests but 10-100-times higher than a routine polymerase chain reaction with reversed transcription (RT-PCR). Sensitivity of RT-PCR has not been achieved in SERS-based aptasensors despite the usage of sophisticated SERS-active substrates. Here, we proposed a novel design of a SERS-based aptasensor with the limit of detection of just 103 particles per ml of the influenza A virus that approaches closely to RT-PCR sensitivity. The sensor utilizes silver nanoparticles with the simplest preparation instead of sophisticated SERS-active surfaces. The analytical signal is provided by a unique Raman-active dye that competes with the virus for the binding to the G-quadruplex core of the aptamer. The aptasensor functions even with aliquots of the biological fluids due to separation of the off-target molecules by pre-filtration through a polymeric membrane. The aptasensor detects influenza viruses in the range of 1·103-5·1010 virus particles per ml.

Combination of Porous Silk Fibroin Substrate and Gold Nanocracks as a Novel SERS Platform for a High-Sensitivity Biosensor

Novel concepts for developing a surface-enhanced Raman scattering (SERS) sensor based on biocompatible materials offer great potential in versatile applications, including wearable and in vivo monitoring of target analytes. Here, we report a highly sensitive SERS sensor consisting of a biocompatible silk fibroin substrate with a high porosity and gold nanocracks. Our silk-based SERS detection takes advantage of strong local field enhancement in the nanoscale crack regions induced by gold nanostructures evaporated on a porous silk substrate. The SERS performance of the proposed sensor is evaluated in terms of detection limit, sensitivity, and linearity. Compared to the performance of a counterpart SERS sensor with a thin gold film, SERS results using 4-ABT analytes present that a significant improvement in the detection limit and sensitivity by more than 4 times, and a good linearity and a wide dynamic range is achieved. More interestingly, overlap is integral, and a quantitative measure of the local field enhancement is highly consistent with the experimental SERS enhancement.

Growth of Nanostructured Silver Flowers by Metal-Mediated Catalysis for Surface-Enhanced Raman Spectroscopy Application

Metallic flowers with nanoscale surface roughness can provide a platform for highly sensitive and reproductive surface-enhanced Raman spectroscopy (SERS). Here, we present a method to grow a nanostructured silver flower (NSF) at the apex of a plasmonic tip based on metal-mediated catalysis, where the NSF was rapidly generated in no more than 1 min. The NSF was used as the SERS substrate under linear polarization beam (LPB) excitation to achieve a 10^-9 M detection sensitivity for the malachite green analyte. The reproducibility for SERS is examined to have been guaranteed by comparing Raman intensity enhanced by different NSFs. Compared with the LPB, the azimuthal vector beam (AVB) excitation can further improve the SERS activity of the NSF, which is consistent with the simulation result that the gap mode can be effectively generated between two adjacent Ag nanoparticles (NPs) and between the NPs and the Ag pyramids on the surface of the NSF under AVB illumination. This work makes it promising for plasmonic tip-mediated catalysis to be applied in nanofabrication, the products of which can be further exploited in nanostructure-based ultrasensitive detection.

High signal collection efficiency in a 3D SERS chip using a micro-reflector

To improve the sensitivity of surface-enhanced Raman spectroscopy (SERS) detection, we propose a three-dimensional (3D) SERS chip based on an inverted pyramid micro-reflector (IPMR) that converges Raman scattering light signals to improve the signal collection efficiency. The influence of the geometric parameters of the inverted pyramid structure on the Raman signal collection efficiency was analyzed by simulation for the determination of the optimal design parameters. The inverted pyramid through-hole structure was prepared on the silicon wafer through an anisotropic wet etching process, followed by the sputtering of a gold film to form the IPMR. The 3D SERS chip was constructed by bonding the IPMR and the active substrate that assembled with silver nanoparticles. Using Rhodamine 6G molecules, the Raman intensity measured with the 3D SERS chip was threefold greater than that of the silicon-based SERS substrate under the same test conditions. These experimental results show that the 3D SERS chip can significantly improve the SERS signal intensity. Its 3D structure is convenient for integration with microfluidic devices and has great potential in biochemical detection applications.